Crosby® 1016909 HR-125 Swivel Hoist Ring, 2500 lb Load, 180 deg Pivot, 360 deg Swivel, 0.69 in Bail, 1/2-13 UNC Thread
Crosby® 1016909 HR-125 Swivel Hoist Ring, 2500 lb Load, 180 deg Pivot, 360 deg Swivel, 0.69 in Bail, 1/2-13 UNC Thread
-
BrandCrosby®
-
Manufacturer Part Number1016909
-
CountryUSA
-
Load Capacity2500 lb
-
Thread Size1/2-13 UNC
-
SeriesHR-125
-
Dimensions3.35 in W
-
Swivel Angle360 deg
- Rated at 100% at 90 deg angle
- 100% Individually proof tested to 2-1/2X the working load limit with certification and statistically magnetic particle inspected
- Each product has a product identification code (PIC) for material traceability, along with the working load limit and the name Crosby® or "CG" stamped into it
- Importantly, these hoist rings meet other critical performance requirements including fatigue life, impact properties and material traceability
- Fatigue rated to 20000 cycles at 1-1/2X the working load limit
- Individually packaged along with proper application instructions and warning information
- Bolt is secured with E-clip, threads are grooved, this method allows for easy disassembly and assembly of hoist ring for thorough examination of all components
- Bolts are individually proof tested
- Top washer has the following features - the working load limit and recommended torque value are permanently stamped into each washer
- Washer is color coded for easy identification, red for UNC thread
- All threads listed are UNC
-
UNSPSC24101600
-
Standards/ApprovalsASME B30.26
-
Catalog
Recently Viewed
Crosby® 1016909 HR-125 Swivel Hoist Ring, 2500 lb Load, 180 deg Pivot, 360 deg Swivel, 0.69 in Bail, 1/2-13 UNC Thread
Crosby® 1016909 HR-125 Swivel Hoist Ring, 2500 lb Load, 180 deg Pivot, 360 deg Swivel, 0.69 in Bail, 1/2-13 UNC Thread
4-1/2" X 7/8" 60-GRIT TYPE 29 FLAP DISC, BLUE ZIRCONIA, DEPRESSED CENTER-FOR71986 >
#6 X 2" Flat Head Phillips Sheet Metal Screw
#10 X 3/4" Stainless Steel Oval Head Phillips Sheet Metal Screw
#12 X 1-3/4" Hex Head Slotted Sheet Metal Screws With Washer
Starrett® 1010Z Flat Contact Pocket Dial Gage, 3/8 in, Graduations: 0.001 in, 1/2 in D Throat, Steel
Handy pocket gage is approximately the size of a thin pocket watch. Ideal for inspectors, purchasing agents and salespeople to check the size of materials up to 3/8" or 9mm thick. The gage fits naturally in the curve between the thumb and index finger. A slight pull on the serrated top plate raises the spindle. 0-.375" Range, 0-100 Dial, .001" Grad, Flat Contacts.

