Power Team 5-TON 1"-STROKE HYD/CYLINDERS RAMS PTD C-51-C
Power Team® C51C C Series General Purpose Spring-Return Single-Acting Hydraulic Cylinder, 5 ton Load, 4.34 in H Min, 5.44 in H Max, 1 in
-
BrandPower Team®
-
UPC662536504393
-
Manufacturer Part NumberC51C
-
CountryUSA|Canada
-
Load Capacity5 ton
-
Piston Stroke1 in
-
Maximum Height5.44 in
-
Minimum Height4.34 in
-
TypeGeneral Purpose Spring-Return Single-Acting
-
SeriesC Series
-
Base Width1-1/2 in
- Aluminum bronze bearing reduces wear caused by aluminum bronze bearing reduces wear caused by off-center loads
- Removable rubber boots protect collar threads during transport and storage
- Solid steel cylinder body for durability
- Chrome plated piston rod resists wear and corrosion
- Wide range of accessories available that mount onto the piston rod, collar, or base
- Base mounting holes standard on 5 through 55 ton cylinders and optional on 75 and 100 ton cylinders
- Collar threads are standard on all C-series models, simplifying fixturing applications
- Removable rubber boots protect collar threads during transport and storage
- Chrome plated piston rod resists wear and corrosion
- A 3/8 in NPTF female half coupler is standard
-
Alternative Part NumberC51C-V
-
UNSPSC24111800
-
Standards/ApprovalsANSI/ASME B30.1|CE Certified
-
Catalog
-
Specification Sheet
-
Instruction/Installation Manual
-
Line Drawing
Recently Viewed
Power Team 5-TON 1"-STROKE HYD/CYLINDERS RAMS PTD C-51-C
Power Team® C51C C Series General Purpose Spring-Return Single-Acting Hydraulic Cylinder, 5 ton Load, 4.34 in H Min, 5.44 in H Max, 1 in
32 TOOTH SPROCKETS FOR #35 CHAIN-IDC35B32F5/8 >
Power Team® RLS500S Heavy Duty Low Profile Welded Hydraulic Cylinder, 50 ton, 3-1/2 in Bore, 5/8 in L Stroke, 2-5/8 in H Retract, 1-3/4 in Dia Rod, 10394 psi
Gates® Power Transmission Poly Chain® GT®2 14MX-34S-20 Synchronous Sprocket, 1/2 to 2-1/8 in Taper-Lock® Bore, 5.86 in OD, 34 Grooves, 5.965 in Dia Pitch, 1.36 in W Face
Poly Chain GT sprockets use the tooth profile designed and developed by Gates and function with Gates Poly Chain GT belts in all existing constructions. These sprockets are statically balanced to make sure the entire belt drive is as safe as possible. Furthermore, they are manufactured, specified, and tested to perfectly support the full power capabilities of the Gates Poly Chain belt product range. Belts and sprockets used together get the best out of your belt drive: maximum performance, prolonged antistatic properties and optimal lifetime.
Dichtomatik N70329 O-Ring, 329 Dash Number, 1.975 in ID x 2.395 in OD, Nitrile Rubber, 70 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
MORSE® 12044 1330L General Purpose Jobber Length Drill Bit, 15/64 in Drill - Fraction, 0.2344 in Drill - Decimal Inch, 118 deg Point, HSS, Bright
