JET® JT9-203115 L-100 Hand Chain Hoist, 1 ton Load, 15 ft H Lifting, 64 lbf Rated
JET® L-100 Series Hand Chain Hoist is designed with steel construction and integrates safety, durability and innovation enabling it to operate in the most demanding industrial environments. Safety features such as the slip clutch style overload protection that prevents the hoist from lifting damaging loads beyond its rated capacity. The JET® exclusive innovation showcased in the patented fused brake system reduces maintenance costs and limits downtime. JET® is so confident in the durability of the fused brake design we back it with an industry leading lifetime replacement warranty. The JET® L-100 is available in ¼ ton to 20 ton capacities and standard lifts of 10, 15, 20, and 30 feet (custom lifts available). Regardless of how harsh the environment, the JET® L-100 Series Hand Chain Hoist is engineered to perform.
-
BrandJET®
-
UPC731325171006
-
Manufacturer Part NumberJT9-203115
-
CountryUSA
-
Load Capacity1 ton
-
Pull to Lift Rated Load64 lbf
-
SeriesL-100
-
Brake TypeDual Pawl Weston
-
Lifting Height15 ft
- Durability, Weston style dual pawl brake system double pawl design increases safety
- Slip clutch design increases safety and overload protection by preventing lifting or pulling damaging loads
- Industrial rated hooks rotate 360 degrees for easy rigging, hooks slowly stretch to indicate an overload situation increasing jobsite safety
- Corrosive resistant grade 100 load chain is stronger than grade 80 load chain extending the life of the hoist
- Load plates are heat treated, case hardened and corrosive resistant coated internal parts extend the life of the hoist in the harshest of environments
- Sealed ball bearing design increases efficiency and promotes smooth operation
- Patented fused brake design proven durability that increases safety with a lifetime replacement warranty
- Cast steel safety latches offer increased durability with heavy duty safety latches secured with Allen screws and lock nuts
- 43 ft hand chain overhaul to lift load 1ft
- 1 number of fall
- 11-5/8 in headroom
- 6.3 x 19 mm load chain
| Competitor Name | Competitor Part Number |
|---|---|
| Fastenal | 0552377 |
-
Alternative Part Number203115
-
UNSPSC24101600
-
Standards/ApprovalsANSI/ASME B30.16 and HST-2 Standards|OSHA Regulations
Recently Viewed
JET® JT9-203115 L-100 Hand Chain Hoist, 1 ton Load, 15 ft H Lifting, 64 lbf Rated
JET® L-100 Series Hand Chain Hoist is designed with steel construction and integrates safety, durability and innovation enabling it to operate in the most demanding industrial environments. Safety features such as the slip clutch style overload protection that prevents the hoist from lifting damaging loads beyond its rated capacity. The JET® exclusive innovation showcased in the patented fused brake system reduces maintenance costs and limits downtime. JET® is so confident in the durability of the fused brake design we back it with an industry leading lifetime replacement warranty. The JET® L-100 is available in ¼ ton to 20 ton capacities and standard lifts of 10, 15, 20, and 30 feet (custom lifts available). Regardless of how harsh the environment, the JET® L-100 Series Hand Chain Hoist is engineered to perform.
W-7/8 INA BEARING COMPANY
THRUST BALL BEARING-INAW7/8>
Synchronous belt drives help reduce the problems of slippage, belt stretch, lubrication and metal to metal contact. They provide superior performance because power is transmitted by positive engagement of belt teeth rather than by friction, as in conventional belt drives.
The Power-Stud® anchor is a one piece fully threaded, wedge style anchor available in carbon steel and stainless steel. Threaded, rod hanger and tie wire versions are designed for use in solid concrete. The drill bit diameter needed for proper installation is the same as the anchor diameter.
MasterDrive 3535-2.11/16 3535 3 Socket Tapered Bushing, 2.68 in Dia Bore, 4.83 in Dia Barrel, 5 in OAL, Cast Iron
TB (Taped Lock Style) Bushings are used on sheaves, sprockets and pulleys to provide increased clamping force over standard bore-to-size components. They are tapered in design without flanges and utilize screws to tighten on the shaft. Their compact design makes them convienent in many applications that are space-constrained. Each TB Bushing size is produced in a number of different finished bore options that include a keyway, as well as a minimum plain bore option. This allows users flexibility when using TB style sheaves, sprockets or pulleys in applications that may utilize various shaft sizes.
Littelfuse® POWR-GARD® MIN025 MINI® LLSRK Fast Blow Special Purpose Automotive Fuse, 25 A, 32 V AC/DC, 1 kA Interrupt
The MINI® fuse is quickly becoming the new standard for vehicle circuit protection. Its miniature design meets the need for more circuits to be protected while utilizing less space and its ability to cope with high temperatures in adverse environments makes the MINI® fuse the recommended choice for protection.
