Bando 10PK800 PK Series Specialty V-Belt, 1.4 in W Top, 800 mm L Outside, 0.175 in THK, EPDM
Bando 10PK800 PK Series Specialty V-Belt, 1.4 in W Top, 800 mm L Outside, 0.175 in THK, EPDM
-
BrandBando
-
Manufacturer Part Number10PK800
-
CountryUSA
-
Thickness0.175 in
-
MaterialEPDM
-
Top Width1.4 in
-
TypeSpecialty
-
SeriesPK Series
-
Number of Ribs10
-
Outside Length800 mm
-
Specification Sheet
Recently Viewed
Bando 10PK800 PK Series Specialty V-Belt, 1.4 in W Top, 800 mm L Outside, 0.175 in THK, EPDM
Bando 10PK800 PK Series Specialty V-Belt, 1.4 in W Top, 800 mm L Outside, 0.175 in THK, EPDM
Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric or BOA concentric locking collar. The contact seal with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction.
JET® JT9-203115 L-100 Hand Chain Hoist, 1 ton Load, 15 ft H Lifting, 64 lbf Rated
JET® L-100 Series Hand Chain Hoist is designed with steel construction and integrates safety, durability and innovation enabling it to operate in the most demanding industrial environments. Safety features such as the slip clutch style overload protection that prevents the hoist from lifting damaging loads beyond its rated capacity. The JET® exclusive innovation showcased in the patented fused brake system reduces maintenance costs and limits downtime. JET® is so confident in the durability of the fused brake design we back it with an industry leading lifetime replacement warranty. The JET® L-100 is available in ¼ ton to 20 ton capacities and standard lifts of 10, 15, 20, and 30 feet (custom lifts available). Regardless of how harsh the environment, the JET® L-100 Series Hand Chain Hoist is engineered to perform.
W-7/8 INA BEARING COMPANY
THRUST BALL BEARING-INAW7/8>
Synchronous belt drives help reduce the problems of slippage, belt stretch, lubrication and metal to metal contact. They provide superior performance because power is transmitted by positive engagement of belt teeth rather than by friction, as in conventional belt drives.
The Power-Stud® anchor is a one piece fully threaded, wedge style anchor available in carbon steel and stainless steel. Threaded, rod hanger and tie wire versions are designed for use in solid concrete. The drill bit diameter needed for proper installation is the same as the anchor diameter.
