JET® JT9-376302 JLH Lever Chain Hoist, 1.5 ton Load, 15 ft H Lifting, 74.89 lb Rated, 1.26 in Hook Opening
JET® JLH Series Lever Hoists incorporate safety, durability and heavy duty construction for operation in severe industrial environments. Safety comes standard with features such as slip clutch style overload protection, which prevents the lever hoist from lifting or pulling damaging loads beyond its rated capacity. Our lightweight design, shorter handle and smaller body are ideal for confined areas and low headroom applications. Backed by a lifetime replacement warranty, JET® revolutionary single-piece brake design fuses the three components into the safest brake system in the market. The JET® JLH Series is available in 1/4 to 9 ton capacities, with standard lifts of 5 ft, 10 ft, 15 ft and 20 ft (custom lifts available). Whether it's inverted, vertical, horizontal or any other load angle, the JET® JLH Lever Hoist is the solution for your heavy duty industrial needs.
-
BrandJET®
-
UPC731325472745
-
Manufacturer Part NumberJT9-376302
-
CountryUSA
-
Load Capacity1.5 ton
-
Chain MaterialSteel
-
Pull to Lift Rated Load74.89 lb
-
Minimum Between Hooks13.19 in
-
Handle TypeLever
-
SeriesJLH
-
Hook Opening1.26 in
-
Dimensions6.38 in W
-
Brake TypeWeston Style Double Ratchet Pawl
-
Lever Length10-1/4 in
-
Lifting Height15 ft
- Caged needle bearings support the load sheave to increase efficiency and promote smooth operation
- Enhanced ergonomic grip allows for greater operator control and increased comfort
- Grade 100, corrosive-resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
- Heat treated load plates
- Industrial rated alloy steel hooks rotate 360 deg for easy rigging
- Weston style double ratchet pawl brake design splits the load to opposite sides of the ratchet gear for greater load security
- Fused brake system and offset handle for safety
- Heavy duty use
-
Alternative Part Number376302
-
UNSPSC24101602
-
Standards/ApprovalsPROP65: This product can expose you to chemicals including lead and cadmium which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to http://www.p65warnings.ca.gov.
-
WarrantyLifetime
-
Instruction/Installation Manual
-
Specification Sheet
Recently Viewed
JET® JT9-376302 JLH Lever Chain Hoist, 1.5 ton Load, 15 ft H Lifting, 74.89 lb Rated, 1.26 in Hook Opening
JET® JLH Series Lever Hoists incorporate safety, durability and heavy duty construction for operation in severe industrial environments. Safety comes standard with features such as slip clutch style overload protection, which prevents the lever hoist from lifting or pulling damaging loads beyond its rated capacity. Our lightweight design, shorter handle and smaller body are ideal for confined areas and low headroom applications. Backed by a lifetime replacement warranty, JET® revolutionary single-piece brake design fuses the three components into the safest brake system in the market. The JET® JLH Series is available in 1/4 to 9 ton capacities, with standard lifts of 5 ft, 10 ft, 15 ft and 20 ft (custom lifts available). Whether it's inverted, vertical, horizontal or any other load angle, the JET® JLH Lever Hoist is the solution for your heavy duty industrial needs.
Dodge® 131848 212 Normal Duty Pillow Block Ball Bearing Unit, 2-1/4 in Dia Bore, 6.88 to 7.94 in L Bolt Center-to-Center, 2.69 in Base to Bore Centerline, 9-1/2 in OAL x 5.34 in OAH
For more than 70 years, Dodge® has been talking to mounted bearing users and listening to their needs. This experience led to design of the optimum mounted ball bearings. The result is the Dodge® SXR line, the most current eccentric collar mounted ball bearing design on the market, provides the user unmatched quality and true total value.
7.5-VOLT INSPECTION BULBS-BUL42A>
Sharkbite® UR23037 Straight Stop, 1/2 x 3/8 in Nominal, Push-to-Connect x Compression End Style, 125 psi Pressure, Lead-Free DZR Brass Body
Sharkbite® UR23037 Straight Stop, 1/2 x 3/8 in Nominal, Push-to-Connect x Compression End Style, 125 psi Pressure, Lead-Free DZR Brass Body
FYH® NAPK209 45MM NAPK Normal Duty Pillow Block Unit, 45 mm Dia Bore, 5-7/8 in L Bolt Center-to-Center, 2-1/16 in Base to Bore Centerline, 7-15/32 in OAL 4-3/16 in OAH
FYH® NAPK209 45MM NAPK Normal Duty Pillow Block Unit, 45 mm Dia Bore, 5-7/8 in L Bolt Center-to-Center, 2-1/16 in Base to Bore Centerline, 7-15/32 in OAL 4-3/16 in OAH
Sealmaster® 701876 MP Series Medium Duty Pillow Block Ball Bearing Unit, 2-7/16 in Dia Bore, 7-1/8 to 8-7/8 in L Bolt Center-to-Center, 3 in Base to Bore Centerline, 11-1/4 in OAL x 6-1/4 in OAH
Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing, and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction. Depending on your preference, these bearings are available in both inch and metric shaft sizes with a wide variety of cast iron, stamped steel or rubber mount housings, sealing, and lubrication options or industry specific solutions.
