TCI Chain 1/2" GR-40 HIGHTEST LOG CHAIN (FT) TCI 14055
Grade 43 high-test chain features both high tensile strength and resistance to wear needed by modern hauling and heavy-duty trucking, farm and construction firms. Working load limits exceed those of ordinary low carbon or general utility chain. Made in USA and comes in a self-colored or zinc finish. Order unit is foot. Not for overhead lifting.
-
BrandPeerless
-
Manufacturer Part Number5031614
-
CountryUSA
-
Link TypeStraight
-
Load Capacity9200 lb
-
FinishSelf-Colored
-
MaterialLow Carbon Steel
-
Trade Size1/2 in
-
TypeWelded
-
Grade43
-
Length100 ft
- Features both high tensile strength and resistance to wear
- Working load limits exceed those of ordinary low carbon or general utility chain
- 1.782 in L x 0.75 in W inside
- Not for overhead lifting
- 0.509 in Dia
- Round cross section
- Packaged in half drum
- Used for a variety of applications
- Made in USA
| Competitor Name | Cross-Reference Number |
|---|---|
| Grainger | 48RP22 |
-
UNSPSC24101600
-
Package Description1/PK
-
Standards/ApprovalsDNV|OSHA 1910.184|NACM Certified|NACM Standard|PROP65: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.|Made in USA
-
Warranty12 Months
-
Catalog
-
Specification Sheet
Recently Viewed
Grade 43 high-test chain features both high tensile strength and resistance to wear needed by modern hauling and heavy-duty trucking, farm and construction firms. Working load limits exceed those of ordinary low carbon or general utility chain. Made in USA and comes in a self-colored or zinc finish. Order unit is foot. Not for overhead lifting.
Browning® Classical Gripbelt® 3693769 B5V® Arm Type 2 Single Groove Sheave, Split Taper Bore, 1/2 to 2-7/16 in Dia Bore, 9.28 in OD, 8.8 in (A)/9.3 in (B)/9.1 in (BV) Dia Pitch, 1 in W Face
Browning® Classical Gripbelt® 3693769 B5V® Arm Type 2 Single Groove Sheave, Split Taper Bore, 1/2 to 2-7/16 in Dia Bore, 9.28 in OD, 8.8 in (A)/9.3 in (B)/9.1 in (BV) Dia Pitch, 1 in W Face
Browning® Classical Gripbelt® 3693645 B5V® Solid Type 1 Single Groove Sheave, Split Taper Bore, 1/2 to 2-7/16 in Dia Bore, 5.68 in OD, 5.2 in (A)/5.7 in (B)/5-1/2 in (BV) Dia Pitch, 1 in W Face
PIX A-35 IS A CLASSICAL V-BELT 37" OUTSIDE LENGTH, 1/2" TOP WIDTH, 5/16" THICKNESS, 1 RIB
OIL RESISTANT, ANTISTATIC, MAXIMUM BELT LINEAR SPEED UP TO 30M/SEC, INDUSTRIAL BELT TYPE, PRIMARILY USED AS REPLACEMENT ON INDUSTRIAL DRIVES. THE CLASSICAL BELTS ARE RECOMMENDED IN SPECIAL APPLICATIONS SUCH V-FLAT DRIVES
-PIXA35 >
Sintered steel bushing on which the center member and friction facings rides are coated with a dry film lubricant; therefore, no oil is present to contaminate friction facings and reduce torque capacity. The bushing "free floats" on the hub. Morse® offers a wide selection of bushing widths in all torque limiter sizes, permitting close matching of center member and bushing width to minimize bearing pressure and promote longer bushing life.
Browning® Classical Gripbelt® 3695210 B5V® Single Groove Sheave, Split Taper Bore, 1/2 to 1-3/4 in Dia Bore, 4.68 in OD, 4.2 in (A)/4.7 in (B)/4-1/2 in (BV) Dia Pitch, 1 in W Face
Browning® Classical Gripbelt® 3695210 B5V® Single Groove Sheave, Split Taper Bore, 1/2 to 1-3/4 in Dia Bore, 4.68 in OD, 4.2 in (A)/4.7 in (B)/4-1/2 in (BV) Dia Pitch, 1 in W Face
