U.S. Tsubaki Power Transmission
Tsubaki® 25-2CL Double Strand Connecting Link, #25 Chain, 1/4 in Pitch, 0.091 in Dia Pin, Carbon Steel
Tsubaki® 25-2CL Double Strand Connecting Link, #25 Chain, 1/4 in Pitch, 0.091 in Dia Pin, Carbon Steel
Tsubaki® 25CL Single Strand Connecting Link, #25 Chain, 1/4 in Pitch, 0.091 in Dia Pin, Carbon Steel
Tsubaki® 25CL Single Strand Connecting Link, #25 Chain, 1/4 in Pitch, 0.091 in Dia Pin, Carbon Steel
Tsubaki® 25R100 Chain, 100 ft OAL, 1/4 in Pitch, 0.091 in Dia x 1/8 in W Roller, Carbon Steel
Tsubaki® 25R100 Chain, 100 ft OAL, 1/4 in Pitch, 0.091 in Dia x 1/8 in W Roller, Carbon Steel
Tsubaki® 50D14LRB Single Pitch Standard Attachment Chain, 10 ft OAL, 5/8 in Pitch, 0.4 in Dia x 3/8 in W Roller, Carbon Steel
Tsubaki® 50D14LRB Single Pitch Standard Attachment Chain, 10 ft OAL, 5/8 in Pitch, 0.4 in Dia x 3/8 in W Roller, Carbon Steel
Tsubaki® 50SA1CL Connecting Link, #50 Chain, 5/8 in Pitch, 0.874 in OAW, 0.2 in Dia Pin, Carbon Steel
Tsubaki® 50SA1CL Connecting Link, #50 Chain, 5/8 in Pitch, 0.874 in OAW, 0.2 in Dia Pin, Carbon Steel
Tsubaki® 80D3CL Connecting Link, #80 Chain, 1 in Pitch, 1.398 in OAW, 0.313 in Dia Pin, Carbon Steel
Tsubaki® 80D3CL Connecting Link, #80 Chain, 1 in Pitch, 1.398 in OAW, 0.313 in Dia Pin, Carbon Steel
Tsubaki® 80R50 Single Strand Roller Chain, 50 ft OAL, 1 in Pitch, 0.63 in Dia Roller, 1.398 in W Roller, Carbon Steel
Tsubaki® 80R50 Single Strand Roller Chain, 50 ft OAL, 1 in Pitch, 0.63 in Dia Roller, 1.398 in W Roller, Carbon Steel
Tsubaki® 80SA1CL Connecting Link, #80 Chain, 1 in Pitch, 1.398 in OAW, 0.313 in Dia Pin, Carbon Steel
Tsubaki® 80SA1CL Connecting Link, #80 Chain, 1 in Pitch, 1.398 in OAW, 0.313 in Dia Pin, Carbon Steel
Tsubaki® BB30 Cam Clutch, 1.181 in Dia Bore, 2.441 in OD, 0.63 in W, 103.3 ft-lb Load
BB series cam clutches are a combination of a 62 series ball bearing and a cam style clutch. These units are designed for press fit applications and are available in five variations, combinations of metal shield or dust protective sealed type and with or without keyways on the inner and/or outer race to allow design and application flexibility. BB series units come grease lubricated but metal shielded style can be adapted for oil bath lubrication.
Tsubaki® BL1444 Heavy Duty Leaf Chain, 10 ft OAL, 1-3/4 in Pitch
Tsubaki® C2060HSA1CL Double Pitch Standard Connecting Link, C2060H Chain, 1-1/2 in Pitch, 1.224 in OAW, 0.235 in Dia Pin, Carbon Steel
Tsubaki® C2060HSA1CL Double Pitch Standard Connecting Link, C2060H Chain, 1-1/2 in Pitch, 1.224 in OAW, 0.235 in Dia Pin, Carbon Steel
Tsubaki® C2080HCL Double Pitch Standard Connecting Link, C2080H Chain, 2 in Pitch, 1.543 in OAW, 0.313 in Dia Pin, Carbon Steel
Tsubaki® C2080HCL Double Pitch Standard Connecting Link, C2080H Chain, 2 in Pitch, 1.543 in OAW, 0.313 in Dia Pin, Carbon Steel
Tsubaki® C2080HOL Double Pitch Standard Offset Link, C2080H Chain, 2 in Pitch, 1.543 in OAW, 0.313 in Dia Pin, Carbon Steel
Tsubaki® C2080HOL Double Pitch Standard Offset Link, C2080H Chain, 2 in Pitch, 1.543 in OAW, 0.313 in Dia Pin, Carbon Steel
Tsubaki® C2080HRB Double Pitch Conveyor Chain, 10 ft OAL, 2 in Pitch, 5/8 in Dia x 5/8 in W Roller, 0.156 in THK Plate
These chains provide a high quality conveying medium for material handling equipment, road building machinery, textile machinery, farming implements, baking, packaging and bottling equipment.
Tsubaki® C80RB Straight Side Bar Chain, 10 ft OAL
Tsubaki® D100R18 Double Strand Roller Chain Sprocket, 7.839 in OD, #100 Chain, 18 Teeth, Carbon Steel
Keep your system on the cutting edge with Tsubaki®, LLC. sprockets and discover the difference quality makes. Tsubaki® sprockets are manufactured from top-grade , heat treated steel to withstand heavy shock loading, resist abrasion.
Tsubaki® DS40A15 Type A Double Single Roller Chain Sprocket, 1/2 in Dia Bore, 2.65 in OD, 40 Chain, 15 Teeth, 1/2 in Pitch, Carbon Steel
This type of sprocket is commonly used in applications where two or more items are powered by a common drive shaft. The space between the sprocket plates is wider than a multi-strand sprocket and allows two separate strands of chain to engage without contacting each other. With this type of sprocket, one strand of chain may exit in a different direction than the other. For example, one strand exiting towards the ceiling and the other running parallel to the floor.
Tsubaki® DS50A17 Type A Double Single Roller Chain Sprocket, 5/8 in Dia Bore, 3.72 in OD, 50 Chain, 17 Teeth, 5/8 in Pitch, Carbon Steel
This type of sprocket is commonly used in applications where two or more items are powered by a common drive shaft. The space between the sprocket plates is wider than a multi-strand sprocket and allows two separate strands of chain to engage without contacting each other. With this type of sprocket, one strand of chain may exit in a different direction than the other. For example, one strand exiting towards the ceiling and the other running parallel to the floor.
Tsubaki® DS80A14 Type A Double Single Roller Chain Sprocket, 1 in Dia Bore, 4.98 in OD, 80 Chain, 14 Teeth, 1 in Pitch, Carbon Steel
This type of sprocket is commonly used in applications where two or more items are powered by a common drive shaft. The space between the sprocket plates is wider than a multi-strand sprocket and allows two separate strands of chain to engage without contacting each other. With this type of sprocket, one strand of chain may exit in a different direction than the other. For example, one strand exiting towards the ceiling and the other running parallel to the floor.
Tsubaki® DS80ATL17 Type A Double Single Roller Chain Sprocket, 2-1/2 in Dia Bore, 5.95 in OD, 80 Chain, 17 Teeth, 1 in Pitch, Carbon Steel
This type of sprocket is commonly used in applications where two or more items are powered by a common drive shaft. The space between the sprocket plates is wider than a multi-strand sprocket and allows two separate strands of chain to engage without contacting each other. With this type of sprocket, one strand of chain may exit in a different direction than the other. For example, one strand exiting towards the ceiling and the other running parallel to the floor.
Recently Viewed
Dodge® 099057 Taper-Lock® Flexible Chain Coupling Flange, 80 Chain, 3-1/4 in Bore Dia 20 Teeth, 7.3 in OD, Steel
Dodge® 099057 Taper-Lock® Flexible Chain Coupling Flange, 80 Chain, 3-1/4 in Bore Dia 20 Teeth, 7.3 in OD, Steel
Dodge® 99154 Rough Stock Bore Flexible Chain Coupling Flange, 80 Chain, 3-1/8 in Dia Bore, 18 Teeth, 6.66 in OD, 4.56 in Dia Hub, Steel
Dodge® 99154 Rough Stock Bore Flexible Chain Coupling Flange, 80 Chain, 3-1/8 in Dia Bore, 18 Teeth, 6.66 in OD, 4.56 in Dia Hub, Steel
Milwaukee® 48-22-8291 Soft Sided Lineman's Compact Aerial Tool Apron, 18 Pockets, Vinyl, Red
The MILWAUKEE® Lineman's Compact Aerial Tool Apron provides easy organization and lasting durability. The aerial tool board is designed specifically for power utility and lineman trades. It features a multi-sized auger holder that won't burn through after extended job site use. The tool apron has 18 custom pockets, including a dedicated flood light pocket, puncture-resistant knife pockets, and magnets to hold sockets in place. The tool board is constructed with durable vinyl material and features two nickel-plated brass eyelets. Built-in weep holes allow for water drainage in the pockets, and the three included D-rings provide additional storage. The aerial tool apron is designed for ultimate durability for a complete and durable storage system specifically designed for the utility trades.
NO. 0 TO NO. 8" PLAIN TAP WRENCH-GNL163 >
Starrett® T232XRL Mechanical Outside Micrometer, 0 to 1/2 in, Graduations: 0.0001 in, Carbide Tip, Satin Chrome
The Starrett 232 & 232M Outside Micrometer features a ratchet stop, lock nut, and carbide face. 0-1/2", .0001" Grad, Carbide Faces, Ratchet Stop, Lock Nut.
Starrett® PT06784-A Gage Holding Arm, 9-17/32 in OAL, 3/8 in Dia x 9-1/2 in L Rod
Standard gage holding rod on the 657D mag base, various 657E combinations with indicators, 252 transfer stands and 665 inspection holders. Rod dimensions 3/8" x 9-1/2" (9.5 x 240mm) with clamping mechanism for gripping the indicator lug back.
