Southwire Company

Southwire - Topaz 81 Conduit Elbow, 1/2 in Trade, 90 deg, Steel, Galvanized

Southwire - Topaz EMT 90 deg elbow is precision manufactured to deliver optimum safety and performance. Fabricated from galvanized steel for low conductivity and high corrosion resistance, all surfaces, both interior and exterior are free from defect to ensure a secure connection to EMT conduit and to preserve integrity and longevity.

Southwire - Topaz 82 Conduit Elbow, 3/4 in Trade, 90 deg, Steel, Galvanized

Topaz's EMT 90° elbow is precision manufactured to deliver optimum safety and performance. Fabricated from galvanized steel for low conductivity and high corrosion resistance, all surfaces, both interior and exterior are free from defect to ensure a secure connection to EMT conduit and to preserve integrity and longevity. Available in sizes from 1/2” to 4”; cULus approved, meets Federal specification WW-C-563.

Southwire - Topaz 83 Conduit Elbow, 1 in Trade, 90 deg, Steel, Galvanized

Topaz's EMT 90° elbow is precision manufactured to deliver optimum safety and performance. Fabricated from galvanized steel for low conductivity and high corrosion resistance, all surfaces, both interior and exterior are free from defect to ensure a secure connection to EMT conduit and to preserve integrity and longevity. Available in sizes from 1/2” to 4”; cULus approved, meets Federal specification WW-C-563.

Southwire - Topaz 836 Female Threaded Conduit Bushing, 2 in Trade, Thermoplastic

Topaz's Rigid insulating bushings offer maximum protection for cables to avoid damaging abrasion due to sharp Rigid edges. Ideal for use in communications, television and security system installations. Bushings provide smooth, rounded surfaces at the ends of raceways and easily affixes to conduit; strong, impact resistant plastic construction assures continued performance. Certified flame retardant to 105°C. Always available in trade sizes from 1/2” to 6”.

Southwire - Topaz 85 Conduit Elbow, 1-1/2 in Trade, 90 deg, Steel, Galvanized

Topaz's EMT 90° elbow is precision manufactured to deliver optimum safety and performance. Fabricated from galvanized steel for low conductivity and high corrosion resistance, all surfaces, both interior and exterior are free from defect to ensure a secure connection to EMT conduit and to preserve integrity and longevity. Available in sizes from 1/2” to 4”; cULus approved, meets Federal specification WW-C-563.

Southwire - Topaz 86 Conduit Elbow, 2 in Trade, 90 deg, Steel, Galvanized

Topaz's EMT 90° elbow is precision manufactured to deliver optimum safety and performance. Fabricated from galvanized steel for low conductivity and high corrosion resistance, all surfaces, both interior and exterior are free from defect to ensure a secure connection to EMT conduit and to preserve integrity and longevity. Available in sizes from 1/2” to 4”; cULus approved, meets Federal specification WW-C-563.

Southwire - Topaz C8451 1-Hole 1-Slot Deep Octagon Box Cover, 4 in W, Blank/Flat Cover, Steel

Southwire - Topaz 4 in octagon blank flat covers are used to cover 4 in octagon box wiring and provide a means for access when future conduit runs are required. cULus listed and RoHS compliant.

Southwire - Topaz RB2 Male Threaded Reducing Bushing, 3/4 x 1/2 in Trade, Steel, Zinc Plated

REDUCING BUSHINGSTopaz's line of Reducing Bushings reduce the size conduit hubs; smooth and rounded integral bushing offers conductor protection. Fabricated from strong and long lasting steel or high grade malleable iron. Steel sizes from 1/2” by 3/8” to 2” by 1 1/2”; malleable iron available in sizes from 2 1/2” by 1” to 4” by 3 1/2”.

Southwire - Topaz WCH1DUP Weatherproof Cover, 4.56 in L x 2.81 in W, Duplex Receptacle Cover, Die Cast Aluminum

Topaz carries a complete line of Weatherproof Covers in a variety of designs to suit multiple applications. All models install cleanly and feature large cord openings for ease of use. Our Single Gang Duplex Horizontal Cover is fabricated from strong, durable and lightweight copper free aluminum and features an aluminum cast cover with spring loaded lid for easy accessibility.All models include gasket, mounting hardware and instructions; available in gray, white and bronze. UL listed, 2011 NEC and NEMA 3R compliant. Point of purchase packaging promotes self merchandising and easy display.

Southwire CCI® 02307 SJTW Extension Cord, 13 A 125 V AC, 25 ft L Cord, 3 Conductors

CCI® 02307 SJTW Extension Cord, 13 A 125 VAC, 25 ft L Cord, 3 Conductors

Southwire CCI® 02407 SJTW Extension Cord With Lighted End, 15 A/125 V AC, 14/3 AWG, 25 ft L Cord

Heavy duty, round, vinyl extension cord designed for industrial use. Orange vinyl jacket protects against oil, grease, ozone and gives added flexibility at below freezing temperatures. Vinyl plugs and connectors are molded on and won't break or pull off cord.

Southwire CCI® 02408 SJTW Extension Cord With Lighted End, 13 A/125 V AC, 14/3 AWG, 50 ft L Cord

PRIME®'s outdoor extension cords are water and weather resistant, flame retardant and made to work. They are ideal for use with power tools, lawn and garden equipment rated up to 15 A. The strain-reliefs are oversized to prevent the wire from separating from the plug and connector.

Southwire CCI® 02409 SJTW Extension Cord With Lighted End, 13 A/125 V AC, 14/3 AWG, 100 ft L Cord

PRIME®'s outdoor extension cords are water and weather resistant, flame retardant and made to work. They are ideal for use with power tools, lawn and garden equipment rated up to 15 A. The strain-reliefs are oversized to prevent the wire from separating from the plug and connector.

Southwire CCI® 1934W8802 Twist-To-Lock Y-Adapter Cord Set, 125 to 250 V AC/20 A/2500 W, 3 ft L Cord, 4 Conductors

Southwire CCI® Tri-Source® 02841 In-Line GFCI Cord Set With Tri-Source® Cord Connector, 120 V AC, (3) 12 AWG Bare Stranded Copper Conductor, 2-1/2 ft L

Provide personal protection from ground faults and open neutral conditions anywhere electrical equipment is used. All GFCIs are compact, weatherproof/rainproof and engineered to handle rugged conditions of any jobsite. All models feature molded connectors, 12 or 14 gauge OSHA safety yellow cords, heavy duty strain relief, reinforced blades and pins, manual "Test/Reset" buttons and industrial grade relays.

Southwire GARVIN® 52C1 Blank Cover, 4 in L x 4 in W, Flat Cover, Steel

4 in square blank flat covers are used to cover 4 in square box wiring and provide a means for access when future conduit runs are required.

Southwire GARVIN® 54C6 Cover, 4 in L x 4 in W, Flat Cover, Cold Rolled Steel

4 in octagon box covers with (1) 1/2 in conduit knockouts are used to cover existing wires in octagon boxes while allowing the installation of a single 1/2 in conduit. Garvin Industries flat covers provide a quick and easy way to cover or terminate exposed electrical wire.

Southwire GARVIN® G1938 Cover, 4 in L x 4 in W, Duplex Receptacle Cover, Steel

4 in square, 1/2 in raised, duplex receptacle industrial surface covers are used to attach a duplex receptacle device directly onto 4 in square boxes in a industrial setting. Garvin Industries 4 in square industrial surface covers allow for a quick installation of duplex devices to steel covers before they are mounted to the box.

Southwire GARVIN® LB150 LB-Style Conduit Body With Unit Cover and Neoprene Gasket, 1-1/2 in Hub, Die Cast Aluminum, Powder Coated

1-1/2 in LB-style conduit bodies are attached to 1-1/2 in threaded rigid or IMC conduits when a change of direction is required. Their removable cover makes general maintece and wire pulling and feed through easy and convenient. Commonly used for electrical service entrance wires or as an economical convenience box when extra wire capacity is needed. Garvin Industries LB-style conduit bodies save time and money by eliminating costly bending of large conduits in order to change the directions of conduit runs. They allow the installer to easily bend wires into the smooth turns. Their powder coated finish and watertight gasket ensure a weatherproof installation.

Southwire GARVIN® LB200 LB-Style Conduit Body With Unit Cover and Neoprene Gasket, 2 in Hub, Die Cast Aluminum, Powder Coated

2 in LB-style conduit bodies are attached to 2 in threaded rigid or IMC conduits when a change of direction is required. Their removable cover makes general maintece and wire pulling and feed through easy and convenient. Commonly used for electrical service entrance wires or as an economical convenience box when extra wire capacity is needed. Garvin Industries LB-style conduit bodies save time and money by eliminating costly bending of large conduits in order to change the directions of conduit runs. They allow the installer to easily bend wires into the smooth turns. Their powder coated finish and watertight gasket ensure a weatherproof installation.

Southwire GARVIN® LC50 C-Style Conduit Body With Unit Cover and Neoprene Gasket, 1/2 in Hub, Die Cast Aluminum, Powder Coated

1/2 in C-style conduit bodies are attached to 1/2 in threaded rigid or IMC conduits when a change of direction is required. Their removable cover makes general maintece and wire pulling and feed through easy and convenient. Commonly used for electrical service entrance wires or as an economical convenience box when extra wire capacity is needed. Garvin Industries C-style conduit bodies save time and money by eliminating costly bending of large conduits in order to change the directions of conduit runs. They allow the installer to easily bend wires into the smooth turns. Their powder coated finish and watertight gasket ensure a weatherproof installation. This item has a 2 hr fire rating.

Southwire GARVIN® LL75 LL-Style Conduit Body With Unit Cover and Neoprene Gasket, 3/4 in Hub, Die Cast Aluminum, Powder Coated

3/4 in LL-style conduit bodies are attached to 3/4 in threaded rigid or IMC conduits when a change of direction is required. Their removable cover makes general maintece and wire pulling and feed through easy and convenient. Commonly used for electrical service entrance wires or as an economical convenience box when extra wire capacity is needed. Garvin Industries LL-style conduit bodies save time and money by eliminating costly bending of large conduits in order to change the directions of conduit runs. They allow the installer to easily bend wires into the smooth turns. Their powder coated finish and watertight gasket ensure a weatherproof installation. This item has a 2 hr fire rating.

Southwire GARVIN® LT100 T-Style Conduit Body With Unit Cover and Neoprene Gasket, 1 in Hub, Die Cast Aluminum, Powder Coated

1 in T-style conduit bodies are attached to 1 in threaded rigid or IMC conduits when a change of direction is required. Their removable cover makes general maintece and wire pulling and feed through easy and convenient. Commonly used for electrical service entrance wires or as an economical convenience box when extra wire capacity is needed. Garvin Industries T-style conduit bodies save time and money by eliminating costly bending of large conduits in order to change the directions of conduit runs. They allow the installer to easily bend wires into the smooth turns. Their powder coated finish and watertight gasket ensure a weatherproof installation. This item has a 2 hr fire rating.

Southwire GARVIN® LT75 T-Style Conduit Body With Unit Cover and Neoprene Gasket, 3/4 in Hub, Die Cast Aluminum, Powder Coated

3/4 in T-style conduit bodies are attached to 3/4 in threaded rigid or IMC conduits when a change of direction is required. Their removable cover makes general maintece and wire pulling and feed through easy and convenient. Commonly used for electrical service entrance wires or as an economical convenience box when extra wire capacity is needed. Garvin Industries T-style conduit bodies save time and money by eliminating costly bending of large conduits in order to change the directions of conduit runs. They allow the installer to easily bend wires into the smooth turns. Their powder coated finish and watertight gasket ensure a weatherproof installation. This item has a 2 hr fire rating.