Milwaukee Tool
Milwaukee BIT EXTENSION-USE "MWK" 48-17-6016
Milwaukee® 48-95-1500 Heavy Duty Drill Extension, 2 in Drill, 9 in L
Milwaukee BIT HOLDERS MWK 48-32-3070
Where quick insert bit changes are necessary, just pop them in/ pull them out with this snap ring and magnetic retention system. No need to unscrew the cap as with the 48-32-3025 bit holder. Three inches in length. For use on stainless steel surfaces. Fits any power or cordless screwdriver.
Milwaukee BIT HOLDERS--USE "MWK" 48-32-4503
Where quick insert bit changes are necessary, just pop them in/ pull them out with this snap ring and magnetic retention system. No need to unscrew the cap as with the 48-32-3025 bit holder. Three inches in length. Fits any power or cordless screwdriver.
Milwaukee BLADE CLAMP SCREWS MWK 06-83-2960
BLADE CLAMP SCREWS-MWK06832960 >
Milwaukee BLADE RELEASE LEVERS MWK 31-52-0032
Milwaukee® 31-52-0032 Blade Release Lever, For Use With 6225 Serial 457H 2-Speed Band Saw
Milwaukee BRUSH HOLDERS MWK 22-20-0691
Milwaukee® 22-20-0691 Left Brush Holder, For Use With 6880 Serial 630B 10 AWG, 6890-2 Serial 734A 16 AWG Nibbler
Milwaukee BRUSH SETS MWK 22-22-1560
Milwaukee® 22-22-1560 Carbon Brush Assembly, For Use With 6148-33/6140-33 Serial B70A 4-1/2 in Angle Grinder with Slide Switch
Milwaukee BRUSH/SPRING ASSEMBLYS MWK 22-18-0040
Milwaukee® 22-18-0040 Carbon Brush Assembly, For Use With 9075-20 Serial 239D 3/4 in D.I. Impact Wrench, 9070-20 1/2 in D.I. Impact Wrench
Milwaukee BULLDOG AVIATION SNIPS MWK 48-22-4500
Milwaukee® Aviation snips are built for long life and durability. Forged blades deliver up to 10X more cuts than cast blades. Bolt logic ensures the blades won't loosen and chrome plating provides rust protection. The flush pivot bolt won't hang up on material for easy use. The metal lock secures the tool for storage and is easily operated with one hand. The bulldog version is ideal for tough cuts.
Milwaukee C/SAW BLADES--USE "MWK" 48-40-0726
Endurance blades offer faster cutting and extra long life for contractors. Carbide teeth made of C3 grade micro ground carbide keeps the cutting edge sharper for longer periods of time. A hardened alloy steel body is used to ensure straight, accurate cuts. Specially engineered heat vents and expansions slots prevent blade distortion and increase blade life. All these features add up to a good quality blade that contractors can depend on, time and time again.
Milwaukee C/SAW BLADES--USE "MWK" 48-40-4335
Endurance blades offer faster cutting and extra long life for contractors. Carbide teeth made of C3 grade micro ground carbide keeps the cutting edge sharper for longer periods of time. A hardened alloy steel body is used to ensure straight, accurate cuts. Specially engineered heat vents and expansions slots prevent blade distortion and increase blade life. All these features add up to a good quality blade that contractors can depend on, time and time again.
Milwaukee CARBIDE HOLE-CUTTER PILOT BITS MWK 49-57-8660
The MILWAUKEE® Carbide Hole Cutter Pilot Bit features carbide teeth for longer life and smooth cuts in stainless steel and other hard metals. Each cutter features a stop shoulder design that prevents over-drilling and limits cuts to a 3/16 in. depth, while a 3-flat shank optimizes each cutter drill bit for use in Drill/Drivers. The spring-loaded pilot bit provides complete plug ejection for clean, efficient cutting of each hole. The solid one-piece design of each hole cutter provides added durability and dependability cut after cut.
Milwaukee CAULKING GUN PLUNGER RODS MWK 49-52-0650
Replacement plunger rod for model 6560 and 6562 Milwaukee caulk gun when set up to use the quart size tube/carriage.
Milwaukee CENTER DRIVE PILOT BITS MWK 49-57-0038
Replacement pilot bit for use with arbor model 49-57-0035 which can be used for both steel plate and sheet metal Carbide tipped hole saws. This bit is standard equipment.
Milwaukee CHAIN SPROCKET KITS MWK 14-46-1175
CHAIN SPROCKET KIT-MWK14461175 >
Milwaukee CHAINSAW SCABBARDS MWK 49-62-0150
Due to prolonged, heavy use some components may need to be replaced. Use only Milwaukee specified replacement parts to achieve maximum life and performance from your Milwaukee Tool. If unable to locate an accessory or repair part please contact Milwaukee Tool.
Milwaukee CHARGERS--USE "MWK" 48-59-1211
The M12™ compact charger and power source provides convenient, on-the-go charging for all M12™ batteries both on and off the jobsite. Using the included jobsite tough micro-USB cable and 2.1A wall plug, the compact charger expands the portability of all M12™ products. When not near an outlet, the compact charger is compatible with any USB output, including in-vehicle USB ports. Delivering additional functionality, the M12™ compact charger and power source combines with any M12™ battery to provide fast, portable charging for electronic devices. It can also be used to power all models of M12™ heated gear for increased functionality. Designed to maximize the versatility of the M12™ system, the multi-function M12™ compact charger and power source provides convenient portable charging for batteries and devices.
Milwaukee CHARGERS--USE "MWK" 48-59-2819
18-V/28-VOLT CORDLESS BATTERY CHARGERS-MWK48592818 >
Milwaukee CHROME PLATED BRASS SPRAYERS MWS A-2000A-2000
CHROME PLATED BRASS SPRAYERS-MWSA2000>
Milwaukee CHUCK KEY HOLDER MWK 48-66-4020
CHUCK KEY HOLDER-MWK48664020 >
Milwaukee CIRCULAR SAWS--USE "MWK" 2782-20
Milwaukee® electric tool Corporation introduces the new M18™ cordless Li-ion 5-3/8 in metal saw. This compact and lightweight metal cutting saw delivers the fastest cuts for the electrical, mechanical, plumbing, HVAC and general construction contractor. The 2682 utilizes an exclusive 4-pole frameless motor for up to 35% more cutting power and best in class run time with over 200 cuts of 3/4 in EMT per charge. The Milwaukee® M18™ cordless Li-ion 5-3/8 in metal saw features a compact, low profile design for easy handling and increased control. At only 5.8 lb, this lightweight circular metal saw delivers easier overhead cuts and less user fatigue. The extra-large cut guide, impact resistant window and led light ensure superior line of site and the stainless steel shoe reduces chip build up to prevent surface marring. The 2682 cordless metal saw features a metal TECH™ 5-3/8 in 30T carbide tipped metal saw blade for cool, burr-free cuts through EMT, strut, threaded rod, sheet metal, angle iron and other ferrous materials.
Milwaukee CIRCULAR SAWS--USE "MWK" 2782-22
Milwaukee® electric tool Corporation introduces the new M18™ cordless Li-ion 5-3/8 in metal saw. This compact and lightweight metal cutting saw delivers the fastest cuts for the electrical, mechanical, plumbing, HVAC and general construction contractor. The 2682 utilizes an exclusive 4-pole frameless motor for up to 35% more cutting power and best in class run time with over 200 cuts of 3/4 in EMT per charge. The Milwaukee® M18™ cordless Li-ion 5-3/8 in metal saw features a compact, low profile design for easy handling and increased control. At only 5.8 lb, this lightweight circular metal saw delivers easier overhead cuts and less user fatigue. The extra-large cut guide, impact resistant window and led light ensure superior line of site and the stainless steel shoe reduces chip build up to prevent surface marring. The 2682 cordless metal saw features a metal TECH™ 5-3/8 in 30T carbide tipped metal saw blade for cool, burr-free cuts through EMT, strut, threaded rod, sheet metal, angle iron and other ferrous materials. Backed by Milwaukee® 5 year warranty the 2682-22 comes equipped with (2) M18™ XC high capacity REDLITHIUM™ battery packs, 30T 5-3/8 in metal TECH™ carbide tipped metal saw blade, blade wrench, 1 hr charger and contractor bag.
Milwaukee CIRCULAR SAWS--USE "MWK" 2930-20
The Milwaukee® M18 FUEL™ rear handle 7-1/4 in. circular saw is designed for the professional carpenter, remodeler, and general contractor. The circular saw generates the power of 15 amp corded saws, cut faster than 15 amp corded saws and delivers up to 570 cuts per charge with an M18™ REDLITHIUM™ HIGH OUTPUT™ HD12.0 battery. The POWERSTATE™ brushless motor provides this worm drive style saw with 5,800 RPM and higher speeds under load, delivering corded cutting performance. REDLINK Plus™ intelligence lets the tool achieve maximum performance and protects the circular saw from overload, overheating and over discharge. The M18 REDLITHIUM™ HIGH OUTPUT™ HD12.0 battery (not included) is compatible with all M18™ tools, runs 50% cooler, and delivers unmatched run times and 50% more power. The cordless circular saw has an electric blade break, LED work light, and all magnesium guards and shoe, increasing productivity and providing the durability to handle the toughest jobs. A multi-sized rafter hook allows the handheld circular saw to be stored on different materials. The saw's gears don’t require oiling and maintenance reducing downtime and getting jobs done faster.
Recently Viewed
TRAPSNAKE™ 6 ft. toilet auger presents a breakthrough in protection, ease of use, and durability over every closet auger that exists today. This tool features a number of industry firsts including a fixed rubber boot for maximum porcelain protection, an integrated locking mechanism which holds the cable in place for easy telescoping extension, and replaceable cables to maximize the longevity of the tool. As part of the trap snake™ porcelain auger system, the trap snake™ 6 Ft. toilet auger can also be put on the M12™ trap snake™ driver, the first powered unit optimized for the challenges of porcelain fixtures. This unit delivers power and speed to work through tough clogs in tight traps, but has optimized electronics that protect the fixture from the auger and allow the user to feel when engaged with a blockage to aid in retrieving.
#10 X 3/4" Bonded Hex Tek-3 Screws
RIDGID® 92505 T-408 Sawtooth Cutter, 3 in, Steel, For Use With: Model K-7500 Drain Cleaning Machine
RIDGID® 92505 T-408 Sawtooth Cutter, 3 in, Steel, For Use With: Model K-7500 Drain Cleaning Machine
RIDGID® 63000 T-203 Bulb Auger, 7/8 in OD, Steel, For Use With: Model K40/71722, K-39B-1, K39/68057, K-39AF and K-50-8/59000 Drain Cleaning Machine
RIDGID® 63000 T-203 Bulb Auger, 7/8 in OD, Steel, For Use With: Model K40/71722, K-39B-1, K39/68057, K-39AF and K-50-8/59000 Drain Cleaning Machine
#10 X 2" Stainless Steel Oval Head Phillips Sheet Metal Screw
RIDGID® 62990 T-201 Straight Auger, 5 in L, Steel, For Use With: Model K40/71722, K-39B-1, K39/68057, K-39AF and K-50-8/59000 Drain Cleaning Machine
RIDGID® 62990 T-201 Straight Auger, 5 in L, Steel, For Use With: Model K40/71722, K-39B-1, K39/68057, K-39AF and K-50-8/59000 Drain Cleaning Machine
