Milwaukee Tool
Milwaukee® 42-04-0600 Water Hose Adapter, For Use With 4094 Serial 740-1001 2-Speed Dymodrill
Milwaukee® 42-04-0600 Water Hose Adapter, For Use With 4094 Serial 740-1001 2-Speed Dymodrill
Milwaukee® 42-28-0211 Rear Load Blade Guide Block Kit, For Use With 6225, 6226 2-Speed Cordless Band Saw
Due to prolonged, heavy use some components may need to be replaced. Use only Milwaukee specified replacement parts to achieve maximum life and performance from your Milwaukee Tool. If unable to locate an accessory or repair part please contact Milwaukee Tool.
Milwaukee® 4202 Electromagnetic Fixed Position Portable Drill Press Base, For Use With 1/2 in and Thicker Flat Ferrous Material, 3/4 in Chuck, Steel, 9 in D Drill
The 4202 electromagnetic variable speed base features solid state electronic switching and a 9 in. drill travel. Feedback speed control maintains speed and a motor/magnet lockout prevents demagnetization during operation. For use on any flat ferrous material, 1/2 in. and thicker.
Milwaukee® 4203 Adjustable Position Portable Electromagnetic Drill Press Base, For Use With 1/2 in and Thicker Flat Ferrous Material, 1 in Chuck, Steel, 11 in D Drill
The 4203 electromagnetic variable speed adjustable base features solid state electronic switching and an 11 in. drill travel. Adjustable position on this base makes lining up the bit easier and faster. The 4203 offers adjustably of 3/4 in. in direction of base length front-to-back and 20 deg right or left of center. Line feedback speed control maintains speed and a motor/magnet lockout prevents de-mag during operation. For use on any flat ferrous material, 1/2 in. and thicker.
Milwaukee® 4204-1 Adjustable Position Electromagnetic Drill Press, 1/2 in Chuck, 1-1/4 hp, 1-1/4 in Drill to Center From Base, 600 rpm Spindle Speed, 120 VAC
This combination unit features the 4203 adjustable position, variable speed base and the 4253-1 1/2 in. drill motor. All you need is a bit and you are ready to drill into any ferrous material 1/2 in. and thicker.
Milwaukee® 4206-1 Adjustable Position Heavy Duty Electromagnetic Drill Press, 3/4 in Chuck, 2 hp, 4-11/16 in Drill to Center From Base, 350 rpm Spindle Speed, 120 V AC
This combination unit features the 4203 adjustable position, variable speed base and the 4262-1 3/4 in. drill motor. All you need is a bit and you are ready to drill into any ferrous material 1/2 in. and thicker.
Milwaukee® 4208-1 Adjustable Position Heavy Duty Electromagnetic Drill Press, 1-1/4 in Chuck, 2 hp, 4-3/8 in Drill to Center From Base, 250/500 rpm Spindle Speed, 120 V AC
This combination unit features the 4203 adjustable position, variable speed base and the 4297-1 1-1/4 in. drill motor. All you need is a bit and you are ready to drill into any ferrous material 1/2 in. and thicker.
Milwaukee® 4209-1 Adjustable Position Heavy Duty Electromagnetic Drill Press, 1-1/4 in Chuck, 2 hp, 5-3/32 in Drill to Center From Base, 750/375 rpm Spindle Speed, 120 V AC
This combination unit features the 4203 adjustable position, variable speed base and the 4292-1 1-1/4 in. drill motor. All you need is a bit and you are ready to drill into any ferrous material 1/2 in. and thicker.
Milwaukee® 4210-1 Fixed Position Electromagnetic Drill Press, 3/4 in Chuck, 2 hp, 5-3/32 in Drill to Center From Base, 350 rpm Spindle Speed, 120 V AC
This combination unit features the 4202 fixed position variable speed base and the 4262-1 3/4 in. drill motor. All you need is a bit and you are ready to drill into any ferrous material 1/2 in. and thicker.
Milwaukee® 4272-21 Compact Electromagnetic Drill Kit, 3/4 in Chuck, 2.3 hp, 1-1/4 in Drill to Center From Base, 475/730 rpm Spindle Speed, 120 V AC
The Milwaukee 1-5/8 in. electromagnetic drill will deliver faster set-up, cutting and drilling. It’s 13 amp motor delivers the fastest drilling w/ annular cutters or twist drill bits. Equipped with a 2-speed gear box the tool can be adjusted tool-free between annular cutters at 475 RPM and twist drill bits at 730 RPM.
Milwaukee® 4292-1 Heavy Duty Portable Magnetic Motor, For Use With Electromagnetic Drill Press, 120 VAC, 11.5 A, 750 rpm No Load, 1-1/4 in Drill Capacity, 1 in Chuck Size, 4 ft Cord, 1530/1600 lb Drill Point Pressure, 1-14 Tap Capacity
This heavy duty unit is built for production drilling and will take the toughest drilling jobs. Model 4292-1 features an 11.5 amp motor with a no.3 morris taper chuck. This two speed unit has 375 and 750 RPM, geared low for maximum torque. Use the larger 4203 adjustable base for this powerhouse, and no job is too large.
Milwaukee® 4297-1 Heavy Duty Portable Magnetic Motor, For Use With Electromagnetic Drill Press, 120 VAC, 11.5 A, 500 rpm No Load, 1-1/4 in Drill Capacity, 1-3/16 in Chuck Size, 8 ft Cord, 1530/1600 lb Drill Point Pressure, 1-14 Tap Capacity
This heavy duty unit is built for production drilling and will take the toughest drilling jobs. Model 4297-1 features an 11.5 amp motor with a no.3 morris taper chuck. This two speed unit has 250 and 500 RPM, geared low for maximum torque. Use the larger 4203 adjustable base for this powerhouse, and no job is too large.
Milwaukee® 43-44-0605 Base Gasket, For Use With 4120 Serial A09A Large Base Dymorig
Milwaukee® 43-44-0605 Base Gasket, For Use With 4120 Serial A09A Large Base Dymorig
Milwaukee® 44-20-0235 Spindle Lock Assembly, For Use With 6065/6065-6 Serial 752C 7 or 9 in 5000 rpm Sander
Milwaukee® 44-20-0235 Spindle Lock Assembly, For Use With 6065/6065-6 Serial 752C 7 or 9 in 5000 rpm Sander
Milwaukee® 44-86-0455 Retainer, For Use With 6880 Serial 630D 10 AWG Nibbler
Milwaukee® 44-86-0455 Retainer, For Use With 6880 Serial 630D 10 AWG Nibbler
Milwaukee® 45-16-0800 Pivot Shoe Assembly, For Use With 6509-68 Serial 0001 0705 Wurth SBS 900-E Reciprocating Saw
Milwaukee® 45-16-0800 Pivot Shoe Assembly, For Use With 6509-68 Serial 0001 0705 Wurth SBS 900-E Reciprocating Saw
Milwaukee® 45-34-1040 Socket, 3/8 in, 1/8 in, 1.75 in L Bit
MILWAUKEE® Hex Bit Sockets with FOUR FLAT™ sides are designed from the ground up to be part of the most versatile socket family. Milwaukee® bit sockets feature an innovative design with four parallel flat sides, which deter rolling and are wrench-compatible. This also creates a slim profile to provide the best access in tight spaces. The one-piece socket design offers improved durability compared to two-piece designs by eliminating the risk of the bit separating from the socket base. Laser engraved size markings provide easy identification and chrome plating offers rust and corrosion protection. All Milwaukee® bit sockets are backed by a Lifetime Guarantee.
Milwaukee® 45-34-9106 Standard Socket With FOUR FLAT™ Sides, 1/2 in, 7/8 in, 6 Points
The MILWAUKEE® 1/2" Drive 7/8" SAE 6-Point Socket with FOUR FLAT™ Sides was designed from the ground up to be part of the most versatile socket family. The 1/2" drive sockets are wrench-ready and feature an innovative design with four parallel flat sides to deter rolling. SAE socket sizes are stamped into the flats for better visibility. Optimized socket geometry helps reduce bolt rounding and stripping.
Milwaukee® 45-88-8565 Spindle Spacer Washer, For Use With 4005 Diamond Coring Motor and Dymodrill with Internal Clutch
Due to prolonged, heavy use some components may need to be replaced. Use only Milwaukee specified replacement parts to achieve maximum life and performance from your Milwaukee Tool. If unable to locate an accessory or repair part please contact Milwaukee Tool.
Milwaukee® 48-01-2712 The TORCH™ SAWZALL® Demo Profile Reciprocating Saw Blade, 6 in L x 1 in W, 10 TPI, Universal Tang
THE TORCH™ metal-cutting blades with the Double Duty Upgrade™ feature a tooth form optimized for the longest life and maximum durability. Tough Neck™ is engineered to protect against tang breakage and delivers the strongest SAWZALL® blade tang on the market. Grid Iron™ features a stamped honeycomb pattern throughout the body of the blade that greatly increases the rigidity of the blade, making it the stiffest metal cutting SAWZALL® blade on the market. These blades are ideal for making tough, straight cuts.
Milwaukee® 48-01-2767 The TORCH™ SAWZALL® Demo Profile Reciprocating Saw Blade, 9 in L x 3/4 in W, 14 TPI, Universal Tang
THE TORCH™ metal-cutting blades with the Double Duty Upgrade™ feature a tooth form optimized for the longest life and maximum durability. Tough Neck™ is engineered to protect against tang breakage and delivers the strongest SAWZALL® blade tang on the market. Grid Iron™ features a stamped honeycomb pattern throughout the body of the blade that greatly increases the rigidity of the blade, making it the stiffest metal cutting SAWZALL® blade on the market. These blades are ideal for making tough, straight cuts.
Milwaukee® 48-03-1000 Replacement Disc Wheel Hub Adapter, For Use With 6066-2 Serial 753-1212 9 in 6000 rpm Sander, Depressed Center Wheels with 7/8 in Dia Hole
Due to prolonged, heavy use some components may need to be replaced. Use only Milwaukee® specified replacement parts to achieve maximum life and performance from your tool. If unable to locate an accessory or repair part please contact Milwaukee® via its website.
Milwaukee® 48-03-3005 Chuck Adapter, 1/2-20 Connection
This adapter allows the use of SDS plus shank accessories in a 1/2 in. chuck rotary hammer.
Milwaukee® 48-03-3010 Spline to SDS-Max Adapter, For Use With Spline Shank Rotary Hammer Drill, 1/8 in Shank, Steel
The MILWAUKEE® carbide-tipped drill bits come in a variety of diameters and lengths with either SDS Plus, SDS Max, or Spline shanks. Milwaukee bits are available in either two-cutter or four-cutter head geometries. The bodies of these bits allow for maximum energy transfer from the hammer to the bit. The optimized flutes provide the fastest debris extraction, speeding up drill rates. The highest-quality carbide maximizes material pulverization. This adapter allows the use of SDS Max shank accessories in a Spline shank rotary hammer.
Recently Viewed
1" X 1-1/2" USS GR-8 Hex Head Capscrew
16' 4-GAUGE 500-AMP JUMPER CABLES-FOR52871 >
#40-3 OFFSET CONNECTING CHAIN LINK-BRW403O/SCORDLESS >
Rust-Oleum High Performance 9100 System DTM Epoxy Mastic Paint is a highly versatile, self-priming coating that provides service life equal to multiple coats of competitive epoxy in just one coat.
RIDGID® 44852 456 Tri-Bender, 90 deg
GOLD METALLIC SPRAY PAINT-KRY1706 >
