Milwaukee Tool
Milwaukee® 49-57-0752 Tang Drive Annular Cutter, 3/4 in Dia Cutter, 1 in D Cutting, Uncoated, Quick-Change Shank
Drill holes up to 3X faster and enjoy fast change-outs with the Milwaukee® 3/4 in. quick change tang drive Steel Hawg® cutter. This long-lasting cutter features Carbide teeth and an alternating cutting pattern to cut up to a 1 in. hole depth in steel, stainless steel, cast iron or aluminum. It leaves a ream-like finish without pre-punching or pilot holes. The Steel Hawg cutter works with most electromagnetic drill presses. Use it with arbor 49-57-0012 or 49-57-0013 on Milwaukee's 4292-1 or 4297-1 magnetic drill press or arbor 49-57-0032 on Milwaukee's 4262-1 mag press.
Milwaukee® 49-57-0750 Annular Cutter, 3/4 in Dia Cutter, 2 in D Cutting, Uncoated, Threaded Shank
Drill holes up to 3X faster than twist drill bits with the Milwaukee® 3/4 in. threaded Steel Hawg® cutter. This long-lasting cutter features Carbide teeth and an alternating cutting pattern to cut up to a 2 in. hole depth in steel, stainless steel, cast iron or aluminum. The spring-loaded, self-ejecting pin lets you make smoother, more accurate cuts and eject the plug faster. The Steel Hawg cutter works with most electromagnetic drill presses. Use it with arbor 49-57-0030 on Milwaukee's 4262-1 magnetic drill press or arbor 49-57-0010 on Milwaukee's 4292-1 mag press. The 3/4 in. bit diameter has a metric thread size of M18 x 1.5 in. shank. Use the threaded Steel Hawg with a No. 3 Morse taper arbor assembly 49 to 57 - 0010.
Milwaukee® 49-57-0689 Tang Drive Annular Cutter, 11/16 in Dia Cutter, 1 in D Cutting, Uncoated, Quick-Change Shank
Drill holes up to 3X faster and enjoy fast change-outs with the Milwaukee® 11/16 in. quick change tang drive Steel Hawg® cutter. This long-lasting cutter features Carbide teeth and an alternating cutting pattern to cut up to a 1 in. hole depth in steel, stainless steel, cast iron or aluminum. It leaves a ream-like finish without pre punching or pilot holes. The Steel Hawg cutter works with most electromagnetic drill presses. Use it with arbor 49-57-0012 or 49-57-0013 on Milwaukee's 4292-1 or 4297-1 magnetic drill press or arbor 49-57-0032 on Milwaukee's 4262-1 mag press.
Milwaukee® 49-57-0626 Tang Drive Annular Cutter, 5/8 in Dia Cutter, 1 in D Cutting, Uncoated, Quick-Change Shank
Drill holes up to 3X faster and enjoy fast change-outs with the Milwaukee® 5/8 in. quick change tang drive Steel Hawg® cutter. This long-lasting cutter features Carbide teeth and an alternating cutting pattern to cut up to a 1 in. hole depth in steel, stainless steel, cast iron or aluminum. It leaves a ream-like finish without pre punching or pilot holes. The Steel Hawg cutter works with most electromagnetic drill presses. Use it with arbor 49-57-0012 or 49-57-0013 on Milwaukee's 4292-1 or 4297-1 magnetic drill press or arbor 49-57-0032 on Milwaukee's 4262-1 mag press.
Milwaukee® 49-57-0564 Tang Drive Annular Cutter, 9/16 in Dia Cutter, 1 in D Cutting, Uncoated, Quick-Change Shank
Drill holes up to 3X faster and enjoy fast change-outs with the Milwaukee® 9/16 in. quick change tang drive Steel Hawg® cutter. This long-lasting cutter features Carbide teeth and an alternating cutting pattern to cut up to a 1 in. hole depth in steel, stainless steel, cast iron or aluminum. It leaves a ream-like finish without pre punching or pilot holes. The Steel Hawg cutter works with most electromagnetic drill presses. Use it with arbor 49-57-0012 or 49-57-0013 on Milwaukee's 4292-1 or 4297-1 magnetic drill press or arbor 49-57-0032 on Milwaukee's 4262-1 mag press.
Milwaukee® 49-57-0251 Tang Drive Annular Cutter, 1/2 in Dia Cutter, 1 in D Cutting, Quick-Change Shank
Drill holes up to 3X faster and enjoy fast change-outs with the Milwaukee® 1/2 in. quick change tang drive Steel Hawg® cutter. This long-lasting cutter features Carbide teeth and an alternating cutting pattern to cut up to a 1 in. hole depth in steel, stainless steel, cast iron or aluminum. It leaves a ream-like finish without pre punching or pilot holes. The Steel Hawg cutter works with most electromagnetic drill presses. Use it with arbor 49-57-0012 or 49-57-0013 on Milwaukee's 4292-1 or 4297-1 magnetic drill press or arbor 49-57-0032 on Milwaukee's 4262-1 mag press.
Milwaukee® 49-57-0038 Replacement Pilot Drill, 1/2 in, 1/2 in D Cutting, High Carbon Steel
Replacement pilot bit for use with arbor model 49-57-0035 which can be used for both steel plate and sheet metal Carbide tipped hole saws. This bit is standard equipment.
Milwaukee® 49-57-0035 Quick-Change Hole Saw Arbor, 3/8 in, HSS
For materials up to 3/16 in. these Carbide tipped sheet metal hole saws produce fine holes in stainless steel or structural steel studs. They can also improve your production in brass, aluminum and other thin sheet materials. Can be used in hand held drills to achieve drill press quality holes. Lubrication during drilling extends the life of the Carbide. Milwaukee recommends the use of Hawg Wash® cutting fluid for best results. Hawg Wash® fluid is available in 16 oz. Bottles (49-32-0081). One bottle makes one gallon of lubricating solution. 2 in. diameter.
Milwaukee® 49-57-0025 Hole Saw Arbor Assembly
No. 3 Morse taper assembly to fit Milwaukee annular cutters 3/4 in. shank.
Milwaukee® 49-57-0010 Arbor Assembly, #3 Shank, For Use With 4292-1 and 4297-1 Magnetic Drill Motor
Steel Hawg® arbor with No. 3 Morse taper shank for use in Milwaukee magnetic drill motors (models 4292-1 and 4297-1). This arbor adapts threaded Steel Hawg® cutters to a no. 3 internal Morse taper motor. For best cutting results use Hawg Wash® cutting fluid to keep cutting surface cool and lubricated. Hawg Wash® fluid is available in 16 oz bottles (49-32-0081). One bottle makes one gallon of lubricating solution. Order oil hose(43-75-0010) and hand pump (44-46-0090) separately to distribute cutting fluid during drilling.
Milwaukee® 49-56-9100 Large Thread Quick-Change Universal Hole Saw Arbor, 1-1/4 in and Larger Arbor, 7/16 in, Alloy Steel/Hardened Carbon Steel
Milwaukee® hole saw arbors are made from hardened carbon steel and alloy steel for greater durability. The 49-56-9100 features a 7/16 in. hex shank, which can be used with any 7/16 in. extension. The 49-56-9100 also features a drive plate which is tightened up to the hole saw to eliminate wobble between the Arbor and hole saw.
Milwaukee® 49-56-8005 Pilot Bit
Milwaukee® Carbide tipped pilot bits are designed for long life in abrasive materials. Use for drilling fiberglass, brick, block and tile.
Milwaukee® 49-56-8002 Pilot Drill, 1/4 in Drill - Fraction, 1/4 in Drill - Decimal Inch, HSS
Milwaukee® 49-56-8002 Pilot Drill, 1/4 in Drill - Fraction, 1/4 in Drill - Decimal Inch, HSS
Milwaukee® 49-56-8000 Pilot Bit, 1/4 in Arbor, High Speed Steel
Milwaukee® 49-56-8000 Pilot Bit, 1/4 in Arbor, High Speed Steel
Milwaukee® 49-56-7240 Large Thread Quick-Change Universal Hole Saw Arbor, 5/8-18 Arbor, 7/16 in, Steel
Milwaukee® Carbide grit hole saws are designed for cutting abrasive materials such as brick, block, cement board, fiberglass and tile. Use a Carbide tipped pilot bit when cutting ceramic tile, brick, and other abrasive materials.
Milwaukee® 49-56-7055 Large Thread Quick-Change Universal Hole Saw Arbor, 1-1/4 in and Larger Arbor, 7/16 in, Alloy Steel/Hardened Carbon Steel
This Milwaukee hole saw arbor has a 7/16 in. hex shank for greater gripping capability in the chuck. The backing plate is equipped with push pins which lock into holes on the backing plate of the hole saw for positive efficient transmission of torque. It can be used in 1/2 in. capacity drills and larger. The arbor has a 5/8 - 18 thread and can be used on hole saws from 1-1/4 in. and larger. It can be used with (49-56-8000), (49-56-8002) and (49-56-8005) pilot bits. Pilot bit (49-56-8000) is supplied with this arbor for use on wood and metal. One arbor and pilot per package.
Milwaukee® 49-56-7010 Arbor & Pilot Drill, 3/8 in Shank
Milwaukee® 49-56-7010 Arbor & Pilot Drill, 3/8 in Shank
Milwaukee® 49-56-7000 Small Thread Basic Hole Saw Arbor, Up to 1-3/16 in Arbor, 7/16 in, Hardened Steel
This Milwaukee hole saw arbor has a 7/16 in. hex shank for greater gripping capability in the chuck. It can be used in 1/2 in. capacity drills and larger. The arbor has a 1/2 - 20 thread and can be used on hole saws from 9/16 in. to 1-3/16 in.. it can be used with 49-56-8000, 49-56-8002 and 49-56-8005 pilot bits. Pilot bit 49-56-8000 is supplied with this arbor for use on wood and metal. One arbor and pilot per package.
Milwaukee® 49-56-6960 Hole Saw Arbor, For Use With 9/16 to 1-3/16 in Dia Hole Saws
Milwaukee® 49-56-6960 Hole Saw Arbor, For Use With 9/16 to 1-3/16 in Dia Hole Saws
Milwaukee® 49-56-6950 Small Thread Hole Saw Arbor, Up to 1-3/16 in Arbor, 1/4 in, Hardened Steel
Milwaukee® hole saw arbors are made from hardened carbon steel and alloy steel for greater durability. The 49-56-6950 arbor drives from the 3-flat shank of the pilot bit, which won't slip in the chuck.
Milwaukee® 49-56-6560 Hole Saw Arbor Adapter, For Use With 1-1/2 in Hole Saw, Steel
Arbor adapter -can be used with 49-56-6950 or 49-56-6951 arbors for use through 1-1/2 in. hole saws. One per package.
Milwaukee® 49-56-4003 Hole Saw, 4 in Dia, 1-5/8 in D Cutting, Tungsten Carbide Cutting Edge
Milwaukee® carbide tipped hole saws provide long life and faster cutting in cement board, ceramic tiles, fiberglass and wood products such as fiberboard, flake board and plywood. Use a carbide tipped pilot bit (49-56-8005) when cutting ceramic tile, brick and other abrasive materials.
Milwaukee® 49-56-3623 Straight Pitch Hole Saw, 3-5/8 in Dia, 1-5/8 in D Cutting, Tungsten Carbide Cutting Edge
Milwaukee® carbide tipped hole saws provide long life and faster cutting in cement board, ceramic tiles, fiberglass and wood products such as fiberboard, flake board and plywood. Use a carbide tipped pilot bit (49-56-8005) when cutting ceramic tile, brick and other abrasive materials.
Milwaukee® 49-56-3503 Hole Saw, 3-1/2 in Dia, 1-5/8 in D Cutting, Tungsten Carbide Cutting Edge
Milwaukee® carbide tipped hole saws provide long life and faster cutting in cement board, ceramic tiles, fiberglass and wood products such as fiberboard, flake board and plywood. Use a carbide tipped pilot bit (49-56-8005) when cutting ceramic tile, brick and other abrasive materials.
Recently Viewed
1/4"-28 SAE GR-5 Zinc Hex Nuts
1"-14 SAE Stainless Steel Hex Nuts
GP® 2038XD Extra-Deep Length Socket, 1/2 in, 1-3/16 in Hex Socket, 6 Points
GP® 1229DM Deep Length Socket Set, 6 Points, 3/8 in Drive, 29 Pieces, Molded Storage Case Container
GP® 1229DM Deep Length Socket Set, 6 Points, 3/8 in Drive, 29 Pieces, Molded Storage Case Container
For materials up to 3/16 in. these Carbide tipped sheet metal hole saws produce fine holes in stainless steel or structural steel studs. They can also improve your production in brass, aluminum and other thin sheet materials. Can be used in hand held drills to achieve drill press quality holes. Lubrication during drilling extends the life of the Carbide. Milwaukee recommends the use of Hawg Wash® cutting fluid for best results. Hawg Wash® fluid is available in 16 oz. Bottles (49-32-0081). One bottle makes one gallon of lubricating solution. 2 in. diameter.
