Milwaukee Tool

The M18 FUEL™ 10 in. dual bevel sliding compound miter saw was designed to meet the demanding needs of professional carpenters and remodelers. Delivering greater capacity than many corded 10 in. sliding miter saws and the POWERSTATE brushless motor delivering corded cutting performance the 2734 provides users a solution to replace their corded miter saws. The REDLITHIUM HD9.0 battery pack delivers up to 400 cuts per charge making the saw capable of lasting an entire day on site with only one pack. Premium features like an adjustable stainless steel detent plate, cam locking miter system, easy access bevel adjustment lever and both a detent override lock and chop lock lever located on the front of the tool the M18 FUEL™ miter saw is designed for easy operation and repeatable, accurate cuts.

The Milwaukee M18 FUEL™ 16 in. Chainsaw delivers the power to cut hardwoods, cuts faster than gas, and delivers up to 150 cuts per charge. The unit is designed to meet the performance, durability and ergonomic needs of professional landscape maintenance, power utility, and the installed M18 user. The POWERSTATE™ brushless motor maintains speed under heavy loads without bogging down to outperform small gas engines and higher voltage systems. REDLINK Plus™ intelligence ensures maximum performance and protection from overload, overheating and over discharge. When paired with the M18™ REDLITHIUM™ HIGH OUTPUT™ HD12.0 battery (sold separately), the unit delivers unmatched run-time in all applications. M18 FUEL™ technology allows the unit to reach full throttle in under 1 second providing ultimate control and productivity.

The Milwaukee 2719 M18 FUEL™ HACKZALL® is the fastest cutting and most powerful one-handed reciprocating saw. Utilizing a POWERSTATE brushless motor and a best in class 7/8 in. stroke length, the M18 FUEL™ HACKZALL® cuts up to 50% faster than competitors. The compact, one-handed design provides superior control and the ability to make cuts in tight spaces. The dual gear counter balance mechanism provides up to 4x lower vibration than traditional reciprocating saws, resulting in faster cut-starts in metal and reduced user fatigue. REDLINK PLUS intelligence ensures optimized performance and protects your investment from overload, overheating, and over-discharge. The M18 REDLITHIUM XC5.0 battery pack provides more work per charge and more work over the life of the pack than competitive batteries. A rubber seal and weep holes provide superior protection against water and debris.

The Milwaukee 2719 M18 FUEL™ HACKZALL® is the fastest cutting and most powerful one-handed reciprocating saw. Utilizing a POWERSTATE brushless motor and a best in class 7/8 in. stroke length, the M18 FUEL™ HACKZALL® cuts up to 50% faster than competitors. The compact, one-handed design provides superior control and the ability to make cuts in tight spaces. The dual gear counter balance mechanism provides up to 4x lower vibration than traditional reciprocating saws, resulting in faster cut-starts in metal and reduced user fatigue. REDLINK PLUS intelligence ensures optimized performance and protects your investment from overload, overheating, and over-discharge. The M18 REDLITHIUM XC5.0 battery pack provides more work per charge and more work over the life of the pack than competitive batteries. A rubber seal and weep holes provide superior protection against water and debris.

The M18™ compact heat gun performs applications quickly by reaching operational temperature in less than 7 seconds. As the most compact cordless heat gun in the market, it can go places where corded heat guns can’t. The guarded nozzle and ladder hook prevent the tool from coming in contact with unprotected surfaces. Powered by REDLITHIUM™ battery technology, it is able to heat over 40 connections on a single XC5.0 battery, anywhere, anytime without the hassle of cords. The M18™ compact heat gun features REDLINK Plus™ intelligence with a temperature management system to provide maximum life.

The MILWAUKEE® M18™ Brushless 4-1/2” / 5” Cut-Off Grinder delivers power and runtime while maintaining a compact size. Milwaukee built and optimized the 11,000-rpm brushless motor specifically for cutting and surfacing applications. The Brushless Grinder, paired with built-in REDLINK™ power tool technology and REDLITHIUM™ batteries, efficiently delivers power and provides longer battery life, resulting in up to 80 cuts in ½” rebar. With the XC5.0 battery attached, the Brushless Grinder's body weighs only 4.6 lbs and measures 12.25" in length. The Brushless Grinder includes an electronic clutch for kickback protection and overload protection to maximize motor life. The 5/8”-11 spindle and tool-free guard adjustments ensure faster adjustments and less downtime while fully compatible with the most common grinder accessories in the market. The compact and lightweight build allows for excellent control and comfort. The all-metal gear case ensures that the Brushless Grinder is built to last and gets the job done every time.

The MILWAUKEE® M18™ FUEL™ 21mm Random Orbital Polisher is the industry's first cordless 21mm RO polisher. By harnessing the power, performance, and run-time of M18™ FUEL™ technology, this polishing tool delivers corded performance while providing the freedom to work anywhere. This battery-powered polisher gives total control with its variable speed trigger, 8-position speed dial with RPM settings ranging from 2,400-4,500 RPM, trigger lock-on button, and maintains speed under load. The M18™ FUEL™ 21mm Random Orbital Polisher frees users from cord management and the fear of surface damage with best-in-class clearance of more than 2" from the battery to the work surface. The Milwaukee M18™ FUEL™ 21mm Random Orbital Polisher provides the run-time necessary to keep professionals productive during polishing and heavy correction applications when paired with M18™ REDLITHIUM™ HIGH OUTPUT™ XC 6.0Ah batteries. This cordless polishing tool is easy to use and comfortable for extended periods with an optimized center of balance and ergonomic design.

The MILWAUKEE® M18™ FUEL™ 15mm Random Orbital Polisher is the most powerful cordless RO polisher on the market. By harnessing the power, performance, and run-time of M18™ FUEL™ technology, this tool delivers corded performance while providing the freedom to work anywhere. This battery-powered polisher delivers total control with its variable speed trigger, 8-position speed dial with RPM settings ranging from 2,650-5,100 RPM, trigger lock-on button, and maintains speed under load better than any cordless competitor. The M18™ FUEL™ 15mm Random Orbital Polisher eliminates the fear and frustration from surface damage or cord management. With over 2” of battery clearance and proper use, work surfaces are protected from dents and scratches. The M18™ FUEL™ 15mm Random Orbital Polisher provides the run-time necessary to keep professionals productive during polishing and heavy correction applications when paired with M18™ REDLITHIUM™ HIGH OUTPUT™ XC 6.0Ah batteries. This polishing tool is easy to use and comfortable for extended periods with an optimized center of balance and ergonomic design.

The M18™ cordless 1/4 in. hex impact driver is the most powerful 1/4 in. hex compact impact driver in its class and offers the best power to size ratio among like competitors. Featuring a Milwaukee® built 4-pole frameless motor and optimized impact mechanism, this impact driver delivers up to 2,750 RPM, 3,450 ipm and 1,500 in-lbs of fastening torque for class-leading performance. REDLINK™ Intelligence provides optimized performance and overload protection using total system communication between tool, battery and charger. The M18™ cordless 1/4 in. hex impact driver features an LED light to illuminate work surfaces, and includes an all-metal, reversible belt clip for temporary tool storage.

The MILWAUKEE® M18™ 6½" Circular Saw provides users with powerful lightweight cutting for a variety of applications including plumbing, electrical, framing, finishing, and carpentry. The cordless circular saw is a high-performance tool that delivers the most durability in a cordless saw. It has a powerful 3,500 RPM motor to quickly and easily cut through tough material such as LVL headers. A magnesium upper guard gives best-in-class durability to protect the blade from drops. The soft-grip handle is ergonomically designed to provide superior comfort and balance for easily controlled cuts. An easy-to-read aircraft aluminum shoe is lightweight, durable and provides greater accuracy in rip cuts while using the lightweight cordless circular saw.

The MILWAUKEE® M18™ Brushless 1” SDS Plus D-Handle Rotary Hammer delivers Corded Power & More Productivity without the hassle of cords. The Milwaukee cordless rotary hammer drills 3/8” x 2” holes faster than corded D-Handle rotary hammers. The Brushless motor delivers 1.95 ft-lbs of impact energy, 1,270 RPM, and 4,580 BPM. The in-line D-Handle design allows access in tight spaces and provides superior balance and ergonomics for downward drilling. Milwaukee AVS Anti-Vibration System minimizes vibration for maximum comfort. The lightweight design of this tool reduces user fatigue throughout the work day at 6.9 lbs when paired with the Milwaukee M18™ REDLITHIUM™ XC5.0 Battery (not included). The Milwaukee M18™ Brushless 1” SDS Plus D-Handle Rotary Hammer drills up to (100) 3/8”x 2” holes per charge when paired with the M18™ REDLITHIUM™ XC5.0 battery (not included). For onboard OSHA Table 1 Compliance, pair with the DUST TRAP™ 10 Pk (48-03-3135), an OSHA® Objective Data compliance solution when used without a vacuum and OSHA® Table 1 compliant when used with a dust extractor. This Milwaukee cordless D-Handle rotary hammer is a part of the M18™ System, which is fully compatible with over 250 solutions.

The M12 FUEL™ 3/8" Extended Reach High Speed Ratchet is the latest addition to Milwaukee's best-in-class lineup of battery-powered ratchets. These MILWAUKEE® M12 FUEL™ ratchets provide industry-leading speed with a slimmer head profile than ever before, and an extended neck that will provide the longest and most convenient reach in tight spaces. The 3/8" Ratchet provides the performance of a pneumatic ratchet with up to 35 ft-lbs max torque, the same torque output as the M12 FUEL™ High Speed Ratchets. The Extended Reach High Speed Ratchets feature an Investment Cast Steel Yoke housing and a POWERSTATE™ Brushless Motor that deliver superior durability you would expect from Milwaukee. This cordless ratchet features built-in REDLIINK™ tool technology to help users complete their tasks faster than ever before, and deliver on more jobs on a daily basis.

The new MILWAUKEE® 3/8” Stubby Impact Wrench delivers the Most Power, Is Lighter Weight & More Compact while delivering 50% Faster Application speeds. The POWERSTATE™ Brushless Motor Delivers 0-3,000 RPM with up to 550 ft-lbs of Nut Busting Torque, allowing the removal of the most corroded and stubborn applications. This solution delivers on performance and size, at only 2.2 lbs bare tool. Users will experience less fatigue throughout their work week while fitting into tight spaces and allowing access where larger impacts can't fit without using additional accessories or disassembling components to reach the desired fastener. Equipped with Tri LED work lights to illuminate your work area without the frustration of shadows. 4-Mode DRIVE CONTROL™ for greater precision and customization to your desired power output, including AUTO SHUT-OFF™ that applies no more than 15 ft-lbs of torque for hand-tight applications that prevent overtightening when in forward. In reverse, bolt removal mode will slow down the RPM once the bolt is free to prevent bolts from flying around your work area. To change the modes, it is a single-handed operation. By shifting the forward-reverse shuttle into neutral and double-tapping the trigger, you will be able to change modes effortlessly. Kitted with the M12™ REDLITHIUM™ HIGH OUTPUT™ XC5.0 Battery Pack that delivers 25% more power, runs 25% cooler, and is chemical resistant to protect against exposure to common oils, greases, and solvents.

The new MILWAUKEE® 3/8” Stubby Impact Wrench delivers the Most Power, Is Lighter Weight & More Compact while delivering 50% Faster Application speeds. Leveraging POWERSTATE™ Brushless Motor, The Stubby Delivers 0-3,000 RPM with up to 550 ft-lbs of Nut Busting Torque, allowing the removal of the most corroded and stubborn applications. This Milwaukee® solution delivers on performance and size, at only 2.2 lbs bare tool. Users will experience less fatigue throughout their work week while fitting into tight spaces and allowing access where larger impacts can't fit without using additional accessories or disassembling components to reach the desired fastener. Equipped with Tri LED work lights to illuminate your work area without the frustration of shadows. 4-Mode DRIVE CONTROL™ for greater precision and customization to your desired power output, including AUTO SHUT-OFF™ that applies no more than 15 ft-lbs of torque for hand-tight applications that prevent overtightening when in forward. In reverse, bolt removal mode will slow down the RPM once the bolt is free to prevent bolts from flying around your work area. To change the modes, it is a single-handed operation. By shifting the forward-reverse shuttle into neutral and double-tapping the trigger, you will be able to change modes effortlessly.

The M12™ rivet tool is the first cordless solution that delivers fast, easy riveting while maintaining performance, durability, and size. The 2550-20 can pull up to 3/16 in. stainless steel rivets, 450 pcs. of 1/8 in. steel rivets on one 1.5 amp hour charge, and reduces muscle effort from a hand tool by over 60%. No compressors or hoses during set up and operation makes this tool a great replacement to pneumatic products. 2X longer life over current cordless solutions delivers greater durability from common jobsite conditions and use. This is the most compact cordless rivet tool on the market, measuring only 6.5 in. in length allowing users more access in tight spaces. The M12 rivet tool is part of the M12 battery platform, offering 90+ solutions on one battery system.

The M12™ rivet tool is the first cordless solution that delivers fast, easy riveting while maintaining performance, durability, and size. The 2550-20 can pull up to 3/16 in. stainless steel rivets, 450 pcs. of 1/8 in. steel rivets on one 1.5 amp hour charge, and reduces muscle effort from a hand tool by over 60%. No compressors or hoses during set up and operation makes this tool a great replacement to pneumatic products. 2X longer life over current cordless solutions delivers greater durability from common jobsite conditions and use. This is the most compact cordless rivet tool on the market, measuring only 6.5 in. in length allowing users more access in tight spaces. The M12 rivet tool is part of the M12 battery platform, offering 90+ solutions on one battery system.

Designed for the professional carpenter and remodeler, the MILWAUKEE® M12 FUEL™ Jig Saw is optimized for power and precision on the jobsite. The M12 FUEL™ Jig Saw delivers the Fastest 12V Blade Speed Under Load, More Control in More Orientations, and Maximum Cut Line Visibility. The POWERSTATE™ Brushless Motor and REDLINK PLUS™ intelligence delivers 3000 strokes per minute at a 7/8" stroke for clean, controlled cuts in a wide variety of finish materials. The compact size, low vibration, and ergonomic barrel-grip design provide more control across standard and inverted orientations of usage. The saw is equipped with an on/off LED light and an on/off dust blower to optimize cut line visibility for the application at hand. The M12™ FUEL Jig Saw features orbital action with 5 adjustment levels, variable speed dial, blade storage, tool-less blade change, and a durable aluminum base plate with bevel detents, and carries our industry-leading 5-year limited power tool warranty.

Designed for the professional carpenter, remodeler, or general contractor; the MILWAUKEE® M12 FUEL™ Orbital Detail Sander is optimized for precision and designed to complement larger sanders on the jobsite. The M12 FUEL™ Orbital Detail Sander delivers faster detail sanding, stain grade finish, and more access in corners and contours. MILWAUKEE® POWERSTATE™ Brushless Motor and MILWAUKEE® REDLINK PLUS™ intelligence provides the power to remove material up to 2X Faster than traditional hand sanding solutions on the market. The detail sander features an orbital sanding motion with a 1.5mm orbit diameter to deliver a clean, consistent stain-grade surface finish. The unique pad shape provides sharp, straight edges for greater accuracy and access into confined corners. The lightweight and ergonomic design at 1.3lbs provides unmatched maneuverability. The innovative counterweight mechanism minimizes vibration to reduce user fatigue. This detailing sander features a variable speed trigger with a lock-on button and four speed settings from 14K - 4K for increased control across a wide variety of materials. The optional sponge pad allows the abrasive to contour to the work surface when working with complex trim profiles, while the pad saver protects against excessive heat buildup to extend the life of the backing pad. The battery-powered detail sander features an integrated LED light, battery fuel gauge, and carries Milwaukee Tool's industry-leading 5-year limited power tool warranty.

The MILWAUKEE® M12 FUEL™ HATCHET™ 6" Pruning Saw delivers unmatched control & access, has the power to cut 3" hardwoods, and delivers up to 120 cuts per charge. This electric pruning saw is designed to meet the ergonomic, performance, and durability needs of landscape maintenance professionals. Weighing less than 5 lbs and featuring a compact design, the cordless pruning saw provides increased control and maneuverability in tight access areas. The POWERSTATE™ Brushless Motor delivers the power to complete cuts in demanding hardwood materials. The REDLINK PLUS™ Intelligence enables full-circle communication between the tool and battery, which allows for unmatched levels of performance, protection, and productivity. The advanced electronic package also delivers an instant throttle response and a variable speed trigger for ultimate control over the power range. The M12™ REDLITHIUM™ XC 4.0Ah Battery (sold separately) delivers best in class run-time and performance. This pruning saw features a full house chain, easy access chain tensioner, automatic oiler, metal bucking spikes, and onboard storage for the scrench. The M12 FUEL™ HATCHET™ 6" Pruning Saw is part of the M12™ System which is fully compatible with over 100 solutions. In addition to the Pruning Saw (2527-20), this product includes (1) Oregon 6" Bar & Chain, (1) Scabbard, and (1) Scrench.

The MILWAUKEE® M12 FUEL™ Oscillating Multi-Tool generates the fastest 12V cut speed, lowest full-tool vibration, and delivers tool-free blade change for faster accessory changes and no misplaced tools. The POWERSTATE™ Brushless Motor delivers 10,000 to 20,000 OPM while maintaining its speed under load better than the competition to provide the fastest cuts of any 12V competitor. The vibration isolating tool design minimizes vibration making cuts more comfortable with less fatigue. REDLINK PLUS™ Intelligence ensures unmatched levels of performance, protection, and compatibility. The M12™ REDLITHIUM™ XC4.0 battery (not included) delivers most work of any 12V battery on the market. The M12 FUEL™ Oscillating Multi-Tool has a 12-Setting Dial allowing users to adjust the speed to the application, and an integrated LED light for maximum visibility.

The MILWAUKEE® M12 FUEL™ 5-3/8” Circular Saw is designed for the professional. Utilizing the POWERSTATE™ brushless motor, the saw delivers the performance to make quick work of ripping and cross-cutting sheet goods as well as cross-cutting dimensional lumber. With its compact and lightweight design, the saw is extremely portable, making this a great solution for cuts in smaller spaces, overhead, and when the capacity of a larger saw is not needed. The M12™ REDLITHIUM™ HIGH OUTPUT™ XC5.0 battery delivers up to 190 cuts in 2x4, delivering the run-time needed to keep users productive on site. The latest in 12v cordless technology, LED light, cut line blower, and integrated storage hook make this a powerful, compact, and convenient cutting solution.

The MILWAUKEE® M12 FUEL™ 3/8” X 13” Bandfile is the first cordless bandfile that delivers pneumatic performance, size, and features for professional automotive, industrial, and metalworking users. The bandfile delivers the fastest spot weld removal by leveraging our POWERSTATE™ Brushless Motor Technology. This MILWAUKEE® bandfile delivers unmatched control with two-speed settings, Forward/Reverse function, a lock-on button, and a variable speed trigger. The Milwaukee M12 FUEL™ Bandfile has a Tool-Free 360⁰ Arm Rotation and provides greater mobility & access. With the M12™ REDLITHIUM™ XC4.0 Battery, this product removes up to 65 spot welds per charge.

The MILWAUKEE® M12 FUEL™ 1/2” X 18” Bandfile is the first cordless bandfile that delivers pneumatic performance, size, and features for professional automotive, industrial, and metalworking users. This bandfile delivers the fastest spot weld removal by leveraging Milwaukee's® POWERSTATE™ Brushless Motor Technology. The cordless bandfile delivers unmatched control with a two-speed setting, Forward/Reverse function, a lock-on button, and a variable speed trigger. The Milwaukee® M12 FUEL™ Bandfile has a Tool Free 360⁰ Arm Rotation and provides greater mobility & access. With the MILWAUKEE® M12™ REDLITHIUM™ XC4.0 Battery, this product removes up to 50 spot welds per charge.

The MILWAUKEE® M12 FUEL 16-Gauge Variable Speed Nibbler is a compact light weight tool that provides the same cutting capacity as its 18V competitors on a 12V system. Delivering fast clean cuts in 16-gauge mild steel, the nibbler is rated for 18-gauge stainless steel and 12-gauge aluminum. Milwaukee M12 FUEL 16-Gauge Variable Speed Nibbler has the power to perform in heavy applications such as cutting up to 22-gauge spiral duct seams. The nibbler tool provides a variable speed dial, tool-free die holder orientation change, and LED work light offers maximum control and productivity. The unique chip collection bag, kitted with the tool, reduces jobsite cleanup. The Milwaukee compact and light weight form factor enables greater access and mobility on the jobsite.