Milwaukee® 2562-21 M12 FUEL™ Stubby Impact Wrench Kit, 3/8 in Drive, 3300 bpm, 6600 in-lb Torque Rating, 12 V, 4.8 in OAL
The new MILWAUKEE® 3/8” Stubby Impact Wrench delivers the Most Power, Is Lighter Weight & More Compact while delivering 50% Faster Application speeds. The POWERSTATE™ Brushless Motor Delivers 0-3,000 RPM with up to 550 ft-lbs of Nut Busting Torque, allowing the removal of the most corroded and stubborn applications. This solution delivers on performance and size, at only 2.2 lbs bare tool. Users will experience less fatigue throughout their work week while fitting into tight spaces and allowing access where larger impacts can't fit without using additional accessories or disassembling components to reach the desired fastener. Equipped with Tri LED work lights to illuminate your work area without the frustration of shadows. 4-Mode DRIVE CONTROL™ for greater precision and customization to your desired power output, including AUTO SHUT-OFF™ that applies no more than 15 ft-lbs of torque for hand-tight applications that prevent overtightening when in forward. In reverse, bolt removal mode will slow down the RPM once the bolt is free to prevent bolts from flying around your work area. To change the modes, it is a single-handed operation. By shifting the forward-reverse shuttle into neutral and double-tapping the trigger, you will be able to change modes effortlessly. Kitted with the M12™ REDLITHIUM™ HIGH OUTPUT™ XC5.0 Battery Pack that delivers 25% more power, runs 25% cooler, and is chemical resistant to protect against exposure to common oils, greases, and solvents.
-
BrandMilwaukee®
-
UPC045242195985
-
Manufacturer Part Number2562-21
-
CountryUSA
-
Torque Rating6600 in-lb
-
TypeStubby
-
Voltage Rating12 V
-
Control Type4-Mode Drive
-
SeriesM12 FUEL™
-
Impact Energy3300 ipm
-
Bare Tool/KitKit
-
Battery Capacity5 Ah
-
Battery IncludedYes
-
Battery TypeLi-Ion
-
Dimensions7.2 in H x 2.4 in W
-
Speed3000 rpm
-
Blows per Minute3300 bpm
-
Drive Size3/8 in
-
Overall Length4.8 in
- Lighter Weight and More Compact
- Tri-LEDs deliver high definition lighting to increase workspace visibility with less shadows
- New Battery Isolation System for secured battery connection and reduced vibration transmitted to the pack
- Compatible with all M12 Batteries and Chargers
- Friction ring socket retention system - Reduces downtime on applications involving frequent changing of accessories
| Competitor Name | Cross-Reference Number |
|---|---|
| Grainger | 827WF3 |
| Ferguson | M256221 |
| Fastenal | 925358637 |
-
Package DescriptionEACH
-
UNSPSC27112713
-
Warranty5 Year (Tool), 3 Years (Battery)
-
SDS
-
Warranty Information
Recently Viewed
Milwaukee® 2562-21 M12 FUEL™ Stubby Impact Wrench Kit, 3/8 in Drive, 3300 bpm, 6600 in-lb Torque Rating, 12 V, 4.8 in OAL
The new MILWAUKEE® 3/8” Stubby Impact Wrench delivers the Most Power, Is Lighter Weight & More Compact while delivering 50% Faster Application speeds. The POWERSTATE™ Brushless Motor Delivers 0-3,000 RPM with up to 550 ft-lbs of Nut Busting Torque, allowing the removal of the most corroded and stubborn applications. This solution delivers on performance and size, at only 2.2 lbs bare tool. Users will experience less fatigue throughout their work week while fitting into tight spaces and allowing access where larger impacts can't fit without using additional accessories or disassembling components to reach the desired fastener. Equipped with Tri LED work lights to illuminate your work area without the frustration of shadows. 4-Mode DRIVE CONTROL™ for greater precision and customization to your desired power output, including AUTO SHUT-OFF™ that applies no more than 15 ft-lbs of torque for hand-tight applications that prevent overtightening when in forward. In reverse, bolt removal mode will slow down the RPM once the bolt is free to prevent bolts from flying around your work area. To change the modes, it is a single-handed operation. By shifting the forward-reverse shuttle into neutral and double-tapping the trigger, you will be able to change modes effortlessly. Kitted with the M12™ REDLITHIUM™ HIGH OUTPUT™ XC5.0 Battery Pack that delivers 25% more power, runs 25% cooler, and is chemical resistant to protect against exposure to common oils, greases, and solvents.
DeWALT® DW266 Depth Sensitive Heavy Duty VSR Screwdriver, 132 in-lb Torque, 120 VAC, 11-1/2 in OAL
Nickel plated brass Valve Caps with long skirt are heavy knurled dome caps. These are high heat-resistant sealing washers.
Milwaukee® 2854-20 M18™ FUEL™ Cordless Variable Compact Impact Wrench With Friction Ring, 3/8 in, 250 ft-lb Torque, 18 V, 4.8 in OAL
The MILWAUKEE® M18 FUEL™ 3/8" Compact Impact Wrench w/ Friction Ring is the most compact in its class, delivering the most access in tight spaces, up to 250 ft-lbs of nut-busting torque, and maximum workspace visibility. The Milwaukee cordless impact wrench measures only 4.8" in length with a POWERSTATE™ Brushless motor to provide the power to remove stubborn fasteners, even in confined spaces. The Milwaukee 3/8" impact wrench has tri-LEDs that surround the anvil to deliver brighter light with fewer shadows. 4-Mode DRIVE CONTROL™ offers greater precision with a range of pre-set RPM and IPM levels, selectable from a single button on the tool. By selecting Mode 4, AUTO SHUT-OFF™ control applies no more than 20 ft-lbs of torque for hand-tight fastening applications to prevent overtightening. Mode 4 also features Bolt Removal Control delivers full torque output, then decreases RPMs once the bolt is loosened to prevent fastener drops. REDLINK PLUS™ Intelligence electronics make these controls possible while ensuring maximum performance, protecting the tool against overloads, over-heating, and over-discharge. The M18™ REDLITHIUM™ battery pack (not included) fits M18™ tools, delivering more work per charge and more work over the life of the pack.
55-TON 13"-STROKE SHOP PRESS WITH ELECTRIC PUMP - OMGIEP5513>
For materials up to 3/16 in. these Carbide tipped sheet metal hole saws produce fine holes in stainless steel or structural steel studs. They can also improve your production in brass, aluminum and other thin sheet materials. Can be used in hand held drills to achieve drill press quality holes. Lubrication during drilling extends the life of the Carbide. Milwaukee recommends the use of Hawg Wash® cutting fluid for best results. Hawg Wash® fluid is available in 16 oz. Bottles (49-32-0081). One bottle makes one gallon of lubricating solution. 2 in. diameter.
