Milwaukee Tool
Milwaukee® 49-90-0040 Vacuum Cleaner Hose, 1-1/2 in ID Dia x 15 ft L Hose, Neoprene, Black
Black 15 Ft. long neoprene lined, wire reinforced, oil resistant 1-1/2 in. I.D. hose has two molded cuff ends. Molded ends fit into swivel end or compression fit connectors which are ordered separately.
Milwaukee® 49-90-0030 Vacuum Cleaner Hose, 1-1/2 in ID Dia x 10 ft L Hose, Canvas Covered/Rubber Lined, Black
Black 10 Ft. long canvas covered, wire reinforced, rubber lined 1-1/2 in. I.D. hose has two molded cuff ends. Molded ends fit into swivel end or compression fit connectors which are ordered separately.
Milwaukee® 49-90-0020 Duck Hose, 1-1/2 in ID Dia x 10 ft L Hose, Canvas Covered/Rubber Lined, White
White 10 Ft. long canvas covered, wire reinforced, rubber lined 1-1/2 in. I.D. hose has two molded cuff ends. Molded ends fit into swivel end or compression fit connectors which are ordered separately.
Milwaukee® 49-81-0030 Replacement Work Light Bulb, 10.8 W, Incandescent Bulb, Miniature Flanged Base, Blunt Tip Shape
Due to prolonged, heavy use some components may need to be replaced. Use only Milwaukee® specified replacement parts to achieve maximum life and performance from your Milwaukee® tool. If unable to locate an accessory or repair part please contact Milwaukee® at Milwaukee®tool.com.
Milwaukee® 49-81-0020 Replacement Work Light Bulb, 10.1 W, Incandescent Bulb, Miniature Flanged Base, Blunt Tip Shape
Due to prolonged, heavy use some components may need to be replaced. Use only Milwaukee® specified replacement parts to achieve maximum life and performance from your Milwaukee® tool. If unable to locate an accessory or repair part please contact Milwaukee® at Milwaukee®tool.com.
Milwaukee® 49-80-0308 Slit Nozzle, For Use With 8978-20, 8986-20 or 8988-20 Heat Gun
The 49-80-0308 slit nozzle can be used with Milwaukee heat guns 8978-20, 8986-20, and 8988-20 when intensified air flow is needed for lap welding PVC canvasses and sheets. (Must be used with 49-80-0305 air reduction nozzle.) includes nozzle only.
Milwaukee® 49-80-0307 Reflector Nozzle, For Use With 8978-20, 8986-20 or 8988-20 Heat Gun, 3/8 in Dia
The 49-80-0307 air reflector nozzle can be used with Milwaukee heat guns 8978-20, 8986-20, and 8988-20 for applications such as small diameter tubing, wires, or shrink wrap tubing. Includes nozzle only.
Milwaukee® 49-80-0306 Reduction Nozzle, For Use With 8978-20, 8986-20 or 8988-20 Heat Gun, 9/16 in Dia
The 49-80-0306 air reduction nozzle can be used with Milwaukee heat guns 8978-20, 8986-20, and 8988-20 for applications where intensified, spot directed heat is needed in corners or for bending Plexiglas or soldering. Similar to the 49-80-0305 but for larger work areas. Includes nozzle only.
Milwaukee® 49-80-0305 Reduction Nozzle, For Use With 8978-20, 8986-20 or 8988-20 Heat Gun, 3/8 in Dia
The 49-80-0305 air reduction nozzle can be used with Milwaukee heat guns 8978-20, 8986-20, and 8988-20 for applications where intensified, spot directed heat is needed for corners, bending Plexiglas or soldering. Includes nozzle only.
Milwaukee® 49-80-0300 Heat Gun Accessory Assortment, For Use With 8988-20 Heat Gun
The 49-80-0300 assortment includes the 49-80-0292 hook nozzle, 49-80-0293 deflector nozzle, 49-80-0294 air spreader nozzle, and 49-80-0297 air reduction nozzle for most common heat gun applications. Fits all Milwaukee heat guns.
Milwaukee® 49-80-0297 Air Reducer Nozzle, For Use With Heat Gun
The 49-80-0297 air reducer nozzle can be used with all Milwaukee heat guns when intensified heat is needed in a specific area - ideal for soldering. Includes nozzle only.
Milwaukee® 49-80-0294 Air Spreader Nozzle, For Use With Heat Gun
The 49-80-0294 air spreader nozzle can be used with all Milwaukee heat guns when intensified heat is needed for removing floor coverings, paint burning, or vinyl top removal. Includes nozzle only.
Milwaukee® 49-80-0293 Deflector Nozzle, For Use With Heat Gun
The 49-80-0293 deflector nozzle can be used with all Milwaukee heat guns to deflect the air away from glass when stripping paint or softening putty. Includes nozzle only.
Milwaukee® 49-80-0292 Hook Nozzle, For Use With Heat Gun
The 49-80-0292 hook nozzle can be used with all Milwaukee heat guns for bending, soldering pipe, shrinking tubing or any application where the heat needs to surround the work piece. Includes nozzle only.
Milwaukee® 49-77-1003 Shrouded Right Angle Cordless Electrical Test Lead, 1 kV AC, 10 A, 39 in OAL, PVC
Milwaukee’s industrial connecting test leads attach to all digital multimeter, clamp meters and fork meters. Designed to withstand up to 1000 V and 10 A, this set of connecting test leads used along with 49-77-1004 industrial test probes and 49-77-1005 industrial alligator clips are ideal for measuring voltage, current and resistance of most electrical systems. Covered by 2 year warranty. Nothing but heavy duty.
Milwaukee® 49-76-0055 Heavy Duty Impact-Resistant Water Tank, 3-1/2 Gallon Poly Tank, NEMA 1-15P
This heavy duty impact resistant poly tank brings water to the diamond coring site when regular tap water is not available.
Milwaukee® 49-72-0152 Die Holder Extension, For Use With M12
The MILWAUKEE® M12 FUEL16 ga Nibbler Die Holder Extension is compatible with the MILWAUKEE® M12 FUEL 16-Gauge Nibbler Bare Tool. It is intended to be used for cutting deeper corrugated metal materials. This accessory is quick to assemble and can be changed without the need of an additional tool.
Milwaukee® 49-67-0110 Heavy Duty Spacer Assembly, For Use With 4125, 4130 and 4136 Diamond Coring Rig
This spacer mounts between the cradle and the diamond drill motor to increase the bit capacity from 10 in. to 14 in. For use with models 4125, 4130 and 4136.
Milwaukee® 49-66-6806 49-66 Socket Packout Set, 6 Points, 31 Pieces
MILWAUKEE® SHOCKWAVE Impact Duty™ Socket Set features the boldest, longest-lasting markings and extreme impact durability in high torque applications. The stamped and ink-filled size marking enables you to select the right socket every time throughout the life of the socket. Engineered with high-strength forged steel for optimized performance in heavy-duty applications. The non-slip hex geometry prevents fastener rounding. The Milwaukee dual-hole design and ring groove allow for easy socket attachment and removal. Sets can be kept organized in the included MILWAUKEE® PACKOUT™ Organizer with a clear top for easy identification of parts at a glance. The PACKOUT Organizer is part of MILWAUKEE® PACKOUT Modular Storage System, allowing for customization of storage systems to easily transport and organize tools and accessories. All MILWAUKEE® SHOCKWAVE Impact Duty ™ Sockets and Extensions are backed by Milwaukee's Lifetime Guarantee and meet ASME industry standards.
Milwaukee® 49-66-6802 49-66 Socket Packout Set, 6 Points, 15 Pieces
MILWAUKEE® SHOCKWAVE Impact Duty™ Socket Set features the boldest, longest-lasting markings and extreme impact durability in high torque applications. The stamped and ink-filled size marking enables you to select the right socket every time throughout the life of the socket. Engineered with high-strength forged steel for optimized performance in heavy-duty applications. The non-slip hex geometry prevents fastener rounding. The milwaukee dual-hole design and ring groove allow for easy socket attachment and removal. Sets can be kept organized in the included MILWAUKEE® PACKOUT™ Compact Organizer with a clear top for easy identification of parts at a glance. The Compact Organizer is part of MILWAUKEE® PACKOUT Modular Storage System, allowing for customization of storage systems to easily transport and organize tools and accessories. All Milwaukee SHOCKWAVE Impact Duty ™ Sockets and Extensions are backed by Milwaukee's Lifetime Guarantee and meet ASME industry standards.
Milwaukee® 49-62-0150 Replacement Scabbard, For Use With 6215-(746-1001) Chain Saw, 16 in
Due to prolonged, heavy use some components may need to be replaced. Use only Milwaukee specified replacement parts to achieve maximum life and performance from your Milwaukee Tool. If unable to locate an accessory or repair part please contact Milwaukee Tool.
Milwaukee® 49-59-2200 Annular Cutter, 2 in Dia Cutter, 2 in D Cutting, HSS, Oxide Treated, Weldon Shank
Milwaukee high speed steel annular cutters offer a thin-wall construction with an advanced tooth geometry that cuts and cleans while drilling, leading to faster holes and longer life. The cutters displace less material for the same size hole as the competition, giving you fast, burr-free holes in anything from sheet metal to thick plate steel. All Milwaukee high speed steel annular cutters have a 3/4 in. Weldon shank for use with most small magnetic drill presses and large magnetic drill presses with the correct arbor.
Milwaukee® 49-59-2188 Annular Cutter, 1-7/8 in Dia Cutter, 2 in D Cutting, HSS, Oxide Treated, Weldon Shank
Milwaukee high speed steel annular cutters offer a thin-wall construction with an advanced tooth geometry that cuts and cleans while drilling, leading to faster holes and longer life. The cutters displace less material for the same size hole as the competition, giving you fast, burr-free holes in anything from sheet metal to thick plate steel. All Milwaukee high speed steel annular cutters have a 3/4 in. Weldon shank for use with most small magnetic drill presses and large magnetic drill presses with the correct arbor.
Milwaukee® 49-59-2175 Annular Cutter, 1-3/4 in Dia Cutter, 2 in D Cutting, HSS, Oxide Treated, Weldon Shank
Milwaukee high speed steel annular cutters offer a thin-wall construction with an advanced tooth geometry that cuts and cleans while drilling, leading to faster holes and longer life. The cutters displace less material for the same size hole as the competition, giving you fast, burr-free holes in anything from sheet metal to thick plate steel. All Milwaukee high speed steel annular cutters have a 3/4 in. Weldon shank for use with most small magnetic drill presses and large magnetic drill presses with the correct arbor.
Recently Viewed
SERIES 5/8" ZINC PLATED STEEL SQUARE CHANNEL WASHER
