Milwaukee Tool
Milwaukee 1-1/4" X 16" SPLINE ROTOHAMMER BIT MWK 48-20-4395
Four cutter Spline bits have a series of 13 Spline that slide into an equal but opposite set of Spline in the drive system of the Spline drive hammer. This positive engagement of Spline to Spline allows maximum transmission of energy from the hammer to the bit. Superior quality Carbide nibs are vacuum brazed to a heat treated steel body resulting in four cutting edges which pulverize the concrete as the bit turns and pounds the work surface. Available from 5/8 in. to 1-1/2 in. diameters. 4 cutter style bits are also available in metric (from 16 mm to 38 mm). One per package.
Milwaukee 1-1/4" X 16" SPLINE ROTOHAMMER BIT MWK 48-20-4125
Milwaukee®'s spline 2-cutter rotary hammer drill bits are used for drilling intro brick, block, and concrete.
Milwaukee 1-1/4" SELF-FEED BITS MWK 48-25-1252
Milwaukee® selfeed drill bits deliver speed and Endurance for repetitive drilling of large holes. Designed for any trade that demands woodcutting for installing pipe and conduit, selfeed bits feed into work without pressure and provide faster boring of clean, accurate holes. The bits have improved balance with reduced runout, while the hex shank provides a secure gripping surface for the drill chuck. Every Milwaukee® selfeed drill bit is coated with a rust inhibitor. Built to last and designed to perform, these selfeed bits are resharpenable so you can keep them cutting like new.
Milwaukee 1-1/4" MAGNETIC DRILL PRESS MWK 4208-1
This combination unit features the 4203 adjustable position, variable speed base and the 4297-1 1-1/4 in. drill motor. All you need is a bit and you are ready to drill into any ferrous material 1/2 in. and thicker.
Milwaukee 1-1/4" MAGNETIC DRILL PRESS MOTORS MWK 4292-1
This heavy duty unit is built for production drilling and will take the toughest drilling jobs. Model 4292-1 features an 11.5 amp motor with a no.3 morris taper chuck. This two speed unit has 375 and 750 RPM, geared low for maximum torque. Use the larger 4203 adjustable base for this powerhouse, and no job is too large.
Milwaukee 1-1/4" GUIDE PLATES MWK 48-20-6151
Increase your precision in masonry and concrete drilling with the Milwaukee® guide plate for thin wall core bit. You'll see reduced bit walk and improved bit stability when you use Milwaukee's durable plastic guide plate and centering pin (not included) for starting holes with your SDS plus rotary hammer drill.
Milwaukee 1-1/4" CARBIDE-TOOTH HOLESAW MWK 49-56-1253
Milwaukee® carbide tipped hole saws provide long life and faster cutting in cement board, ceramic tiles, fiberglass and wood products such as fiberboard, flake board and plywood. Use a carbide tipped pilot bit (49-56-8005) when cutting ceramic tile, brick and other abrasive materials.
Milwaukee 1-1/4" 120-VOLT REVERSIBLE DRILLS MWK 2404-1
The most hand-held power available in a specialty drill. Part of Milwaukee® super hole Shooter line, the 1-1/4 in large drill delivers versatile portable power for the toughest drilling and auger applications. The drill is furnished with a powerful Milwaukee® built motor and a #3 internal Morse taper socket. Poly chrome alloy steel gears produce high torque with minimum wear. You will get quiet performance from the heat treated, helical cut gears. The extra long switch handle and pipe handle provide maximum leverage and added control.
Milwaukee 1-1/2" X 22" SPLINE R/H BITS MWK 48-20-4151
Milwaukee®'s spline 2-cutter rotary hammer drill bits are used for drilling intro brick, block, and concrete.
Milwaukee 1-1/2" X 16" SPLINE R/H BITS MWK 48-20-4150
Milwaukee®'s spline 2-cutter rotary hammer drill bits are used for drilling intro brick, block, and concrete.
Milwaukee 1-1/2" X 12"-LENGTH SCALING CHISEL MWK 48-62-2040
Milwaukee® chisels are made from high grade, forged steel, providing up to 20% longer life. Scaling chisels are ideal of cleaning concrete and removing scale and rust. Additionally, scaling chisels can be used for cutting troughs and some asphalt. The widened tip design allows for faster surface material removal. This chisel is specifically designed for spline rotary hammers and should be used in hammer only mode.
Milwaukee 1-1/2" V/CLEANER ASSY KITS MWK 49-90-1810
For less abusive environments where metal attachments are not required, this general purpose cleaning kit includes plastic attachments. The kit includes: 49-90-1865 chromed metal 2-piece floor wand, 49-90-1770 plastic crevice tool, 49-90-1775 6 in plastic utility nozzle, 49-90-1845 plastic 14 in squeegee insert, 49-90-1850 plastic 14 in carpet insert, 49-90-1840 plastic master floor tool, 49-90-1860 plastic round dust brush, 49-90-1855 plastic 14 in brush insert. Fits 1-1/2 in ID Hoses. All inserts snap lock into master floor tool.
Milwaukee 1-1/2" SCALING CHISELS MWK 48-62-6020
Milwaukee® chisels are made from high grade, forged steel, providing up to 20% longer life. Cleans concrete, scale, rust, cuts troughs and some asphalt. This chisel is specifically designed for SDS Plus rotary hammers and should be used in hammer only mode.
Milwaukee 1-1/2" GUIDE PLATES MWK 48-20-6153
Use for starting a 1-1/4 in. hole drill to a depth of approximately 1/4 in., stop hammer, remove guide plate and center pin. Place core bit back into the grooved area and resume drilling to required depth of hole. Adds bit stability and reduces bit walk.
Milwaukee 1-1/2" DIA CONCRETE CORE BIT MWK 48-16-1507
1-1/2" DIAMOND CONCRETE CORE BITS-MWK48161507 >
Milwaukee 1-1/2" CARBIDE TWO-PIECE CORE BITS MWK 48-20-5025
Milwaukee®'s SDS Plus thin wall core bits are used for drilling large through holes into brick, block, concrete. Includes core bit, guide plate, and centering pin.
Milwaukee 1-1/2" CARBIDE TOOTH HOLESAWS MWK 49-57-8227
Specifically designed for hand held operations in materials up to 3/8 in. thick, these Carbide tipped steel plate cutters stay sharper longer than high speed steel or bi-metal hole saws. They produce drill press quality holes even in hand held operations. For cutting materials over 3/8 in. up to a depth of 1/2 in., a drill press is recommended. When cutting depth is over 1/4 in., use Hawg Wash® cutting fluid to keep cutting surface cool and lubricated. Hawg Wash® fluid is available in 16 oz. Bottles (49-32-0081). One bottle makes one gallon of lubricating solution.
Milwaukee 1-1/2" CARBIDE THICK WALL CORE BIT MWK 48-20-5125
Milwaukee®'s SDS Max and Spline thick wall core bits are used for drilling large through holes into brick, block, concrete. Includes core bit, guide plate, and centering pin.
Milwaukee #6890 NIBBLER PUNCHES MWK 48-44-0260
This item is the replacement punch for Milwaukee's 16 gauge nibbler model 6890. The replacement die, 48-44-0270, is purchased separately. Must be used with plate wrench 49-96-4725 to remove the protective collar and 49-96-0330 2.5 mm wrench to remove the punch.
Milwaukee #6851 SPEED CONTROL SWITCHES MWK 23-66-1253
Milwaukee® 23-66-1253 Speed Control Switch, For Use With 6850 18 AWG Swivel Head Shear
Milwaukee #6480-20 PANEL SAW EXTENSION MWK 49-22-8108
The 49-22-8108 extension kit is used with Milwaukee's 6480-20 panel saw and is recommended whenever material over 6 ft. in length will be cut frequently. The kit extends the roller material carriage 18 in. on each end making the overall roller material carriage 8 ft. in length.
Milwaukee #6230 BANDSAW FRONT HANDLES MWK 31-44-0330
6230 BANDSAW FRONT HANDLE-MWK31440330 >
Milwaukee #5540 SANDER/POLISHER PADS MWK 49-36-2500
#5540 SANDER/POLISHER PAD-MWK49362500 >
Milwaukee #5192 DIE GRINDER TOGGLE SWITCHES MWK 23-66-2190
Milwaukee® 23-66-2190 Switch, For Use With 6805 Serial 709C 16 AWG Shear
Recently Viewed
Milwaukee® M12™ 48-20-7477 2-Cutter Single Tip Rotary Hammer Drill Bit, 1/2 in Drill Bit, SDS-Plus Shank, 16 in D Cutting, Carbide Cutting Edge, 18 in OAL
Milwaukee® M/2™ 2-cutter SDS Plus rotary hammer drill bits are the most durable 2-cutter bits with up to 20% more holes per charge in cordless rotary hammers. The enhanced rebar guards provide increased durability in hard aggregate and rebar. Breaker point pulverize the material more effectively resulting in faster drilling speeds. The variable flute allows for maximum debris extraction leading to up 20% more holes per charge in cordless rotary hammer while making it a very durable bit in corded and cordless rotary hammers. Additionally, M/2™ 2-cutter features a centering tip for exact spot drilling, wear mark indicator indicating when the bit no longer meets ANSI diameter requirements, and a reinforced flute for durability and minimized vibration. The increased life and efficiency of the M/2™ 2-cutter drill bit line provides the ideal solution in general concrete for cordless and corded rotary hammer users.
Milwaukee®'s spline 2-cutter rotary hammer drill bits are used for drilling intro brick, block, and concrete.
Reed 03532 Replacement Cutter Wheel, 0.45 in Blade Exposure, For Use With 5301PD and 5401TMSO Pipe Cutter
All REED cutter wheels are made from high shock-resistant tool steel, while competitive cutter wheels are made from carbon steel or still lower quality tool steel. By using this higher quality raw material, REED cutter wheels can be made thinner and can therefore cut pipe more easily and leave less burr. Also, because of their higher quality, certified material, only REED cutter wheels can be heat-treated for the perfect balance between hardness and toughness to make REED cutter wheels resist breakage and last longer.
1-1/2-HP 3-PHASE 56-C 1725-RPM MOTOR - BLDVM3554>
Crescent® P2335MEN P2000 Tape Measure, 16 ft L, Steel Blade, 1/16 in Graduation
Crescent built its reputation on durability and these new tapes are no exception. The P2000 Series cases are made of durable, polished chrome, modified for increased strength and impact resistance. Each tape's blade is protected with a clear-coat that exceeds ASTM standards for abrasion and corrosion resistance.
Ingersoll Rand W5350-K12 Impact Wrench Kit, 1/2 in Square Drive, 3000 bpm, 245 ft-lb Torque, 20 V
Ingersoll Rand W5350-K12 Impact Wrench Kit, 1/2 in Square Drive, 3000 bpm, 245 ft-lb Torque, 20 V
