Milwaukee Tool
Milwaukee 3/8" ROUTER COLLETS MWK 48-66-1000
Replacement collet for previous Milwaukee router models 5610, 5620, 5650, 5660, 5670, 5680, 5681 and 5682 to secure 3/8 in. shank router bits for precision routing.
Milwaukee 3/8" REGULAR-THREAD FEED SCREWS MWK 48-28-6880
Extend the life of your Milwaukee® Selfeed drill bits with the single ended feed screw. The aggressive feed screw thread design allows the bit to be pulled through the wood faster, resulting in faster drilling. The 3/8 in. regular thread replacement screw is designed for Selfeed bits 3 in. in diameter and larger. Use only Milwaukee specified replacement parts to achieve maximum life and performance from your Milwaukee Tool.
Milwaukee 3/8" REFLECTOR NOZZLES MWK 49-80-0307
The 49-80-0307 air reflector nozzle can be used with Milwaukee heat guns 8978-20, 8986-20, and 8988-20 for applications such as small diameter tubing, wires, or shrink wrap tubing. Includes nozzle only.
Milwaukee 3/8" REDUCTION NOZZLES MWK 49-80-0305
The 49-80-0305 air reduction nozzle can be used with Milwaukee heat guns 8978-20, 8986-20, and 8988-20 for applications where intensified, spot directed heat is needed for corners, bending Plexiglas or soldering. Includes nozzle only.
Milwaukee 3/8" MAS/BIT--USE "MWK" 48-20-9021
Milwaukee® 3-flat Secure-Grip™ hammer drill bits drill faster and last longer than others on the market. The 3-flat Secure-Grip™ shank fits in all 1/2 in 3-jaw hammer drill chucks and maintains unyielding bit hold with heavy torsional loads. Designed especially for conical anchor, concrete screw, nail-in and hollow wall anchor applications, the bit provides superior performance through its reinforced flute geometry and carbide tip design. Milwaukee® offers a complete range of 3-flat Secure-Grip™ hammer drill Bits in diameters from 1/8 to 1 in with lengths upto 18 in.
Milwaukee 3/8" H/D VSR 120-VOLT DRILLS MWK 0224-1
3/8" H/D VSR ELECTRIC DRILL-MWK02241>
Milwaukee 3/8" DRILL 3/8"-24 METAL CHUCKS MWK 48-66-1530
3/8" DRILL 3/8" -24 METAL CHUCKS-MWK48661530 >
Milwaukee 3/8" CLOSE QUARTER DRILLS MWK 0370-20
The 0370-20 close quarters angle drill provides a unique chuck angle for reaching into tight areas. Its large paddle trigger and textured grip area provides comfort and control in all positions. The angled cord exit keeps the cord out of the work area. The convenient forward/reverse lever is easy to use in close quarters.
Milwaukee 3/8" C/LESS IMPACT WRENCH MWK 2658-22
The M18™ cordless 3/8 in. Compact Impact Wrench is the most powerful 3/8 in. Compact Impact Wrench in its class and offers the best power to size ratio among like competitors. Featuring a Milwaukee® built 4-pole frameless motor and optimized impact mechanism, this impact driver delivers up to 2,450 RPM, 3,350 ipm and 167 ft-lbs of fastening torque for class-leading performance. REDLINK™ Intelligence provides optimized performance and overload protection using total system communication between tool, battery and charger. The M18™ cordless 3/8 in. Compact Impact Wrench features a 3/8 in. friction ring anvil for fast, tool-free socket changes, an LED light to illuminate work surfaces, and includes an all-metal, reversible belt clip for temporary tool storage.
Milwaukee 3/8" C/LESS DRILLS MWK 0218-1
3/8" CORDLESS DRILL-MAK02181>
Milwaukee 3/8" C/L RIGHT ANGLE DRILL MWK 2415-21
Work more efficiently with the most versatile right angle drill/driver on the market. With a head size of just 3-3/4 in., this M12TM right angle drill/driver is compact and lightweight for drilling and fastening in tight spaces, yet delivers 100 in-lbs of torque. It's the first subcompact with a spindle lock chuck for maximum versatility and grip. It also features the industry's first electronic clutch, with 12 torque settings and an LED indicator for fastening with complete control. The M12 REDLITHIUM™ battery pack delivers more work per charge and more work over pack life than the competitors. The inboard fuel gauge helps you monitor the charge precisely, so there's less downtime on the job, and a built-in LED light illuminates the work surface. An extended paddle switch gives you ultimate comfort and convenience during prolonged use. The kit includes an M12 REDLITHIUM battery, 30-minute charger and carrying case.
Milwaukee 3/8" 120-VOLT VSR DRILLS MWK 0201-20
Perform at higher speeds. The 3/8 in Magnum® drill with all metal chuck makes drilling, surface finishing and other maintenance tasks go quickly with its extra speed. The drill's powerful motor delivers upto 2500 rpm the all metal gear case and diaphragm provide high durability on the jobsite while the Grip-Lok™ chuck adds convenience and extra grip strength. The ergonomic, tactile grip and two finger trigger optimize user comfort and balance.
Milwaukee 3/8" 120-V ELECTRIC DRILLS MWK 0233-20
Built to handle industrial and construction applications with ease. The 3/8 in Magnum® drill with keyless chuck has the raw power of a Milwaukee® built motor to perform in forward and reverse on wood, metal, plastics and composites. The keyless chuck makes accessory changes fast and convenient, while the exclusive brush system speeds brush changes to under 1 min.
Milwaukee 3/8" 120-V DRILL-USE "MWK" 0240-20
Get maximum versatility in this 3/8 in workhorse drill. The 3/8 in Magnum® drill with all metal chuck and QUIK-LOK™ cord features a powerful motor for optimal speed and torque for hole saws, twist bits and light fastening jobs. The all metal gear case and diaphragm provide high durability on the jobsite the ergonomic, tactile grip and two finger trigger optimize your comfort and balance. Add the convenience and extra grip strength of the Grip-Lok™ chuck and a heavy duty detachable cord and you have unchallenged value.
Milwaukee 3/8" 1000-RPM 120-VOLT DRILL MWK 0229-1
3/8" 100-RPM ELECTRIC DRILL-MWK02291>
Milwaukee 3/8" (3/8"-24) DRILL CHUCKS MWK 48-66-0795
3/8" (3/8" -24) DRILL CHUCKS-MWK48660795 >
Milwaukee 3/4"X11"X16" SPLINE ROTOHAMMER BIT MWK 48-20-4335
Milwaukee®’s Spline 4-cutter rotary hammer drill bits feature a 4-cutter 4 x 90° tip geometry to avoid lock up in rebar, patented rebar chamfers for increased durability, and a high volume flute for fast debris removal. Used for drilling holes in brick, block, concrete, and reinforced concrete.
Milwaukee 3/4"X11"X16" SPLINE R/H BITS MWK 48-20-4076
Milwaukee®'s spline 2-cutter rotary hammer drill bits are used for drilling intro brick, block, and concrete.
Milwaukee 3/4"-SHANK STEEL-HAWG CUTTER ARBOR MWK 49-57-0030
Steel Hawg arbor with 3/4 in. shank for use in Milwaukee magnetic drill motor 4262 - 1. This arbor adapts threaded Steel Hawg cutters to a 3/4 in. chucked motor. For best cutting results use Hawg wash cutting fluid to keep cutting surface cool and lubricated. Hawg wash fluid is available in 16 oz. Bottles (49-32-0081). One bottle makes one gallon of lubricating solution. Order oil hose(43-75-0010) and hand pump (44-46-0090) separately for distributing cutting fluid during drilling.
Milwaukee 3/4"-HEX X 12"-LENGTH BULL POINTS MWK 48-62-3000
Drop forged of high grade steel, this hammer iron with heat treated work areas is used for demolition work and starting holes in the center of a concrete slab. One per package.
Milwaukee 3/4"-HEX ASPHALT CUTTERS MWK 48-62-3090
Milwaukee® chisels are made from high grade, forged steel, providing up to 20% longer life. Designed for cutting asphalt or hard ground (do not use for concrete). This chisel is specifically designed for SDS-Max rotary hammers and should be used in hammer only mode.
Milwaukee 3/4" X 9-3/4" BUSHING TOOLS MWK 48-62-3085
Removes excess concrete, produces exterior finish, roughens surface before surface coating.
Milwaukee 3/4" X 36" 4-C SPLINE R/HAMMER BIT MWK 48-20-4350
Milwaukee®’s Spline 4-cutter rotary hammer drill bits feature a 4-cutter 4 x 90° tip geometry to avoid lock up in rebar, patented rebar chamfers for increased durability, and a high volume flute for fast debris removal. Used for drilling holes in brick, block, concrete, and reinforced concrete.
Milwaukee 3/4" X 29" SPLINE ROTOHAMMER BITS MWK 48-20-4345
Milwaukee®’s Spline 4-cutter rotary hammer drill bits feature a 4-cutter 4 x 90° tip geometry to avoid lock up in rebar, patented rebar chamfers for increased durability, and a high volume flute for fast debris removal. Used for drilling holes in brick, block, concrete, and reinforced concrete.
Recently Viewed
ITM HE25564 Hand Tool Socket Driver Bit, 1/4 in Drive Hex Shank Drive, 5/64 in
12/3 TWIST-LOCK "Y" ADAPTERS
Pyramex® RJ3110M Bomber Jacket, Hi-Viz Lime, Polyester Shell, 38 to 40 in Chest, Resists: Weather, ANSI Class 3 Type R
ITM HE25864 Hand Tool Socket Driver Bit, 1/4 in Drive Hex Shank Drive, 1/8 in
GP® 1235TT Extended Length Socket Driver Bit, 1/4 in Drive, 12 Pieces
GP® 1235TT Extended Length Socket Driver Bit, 1/4 in Drive, 12 Pieces
Klein® 630-7/16-INS Nut Driver, 7/16 in, Hollow Shank, Cushion Grip Handle
