Milwaukee Tool

The Milwaukee® SDS plus bits with 1/4 in. hex are designed specifically for Tapcon® screw applications. Built to take on brick, block, and concrete Milwaukee SDS bits feature 2-cutter geometry for fast drilling and debris removal. The patented, reinforced flute design increases impact resistance and transfers energy directly to the bit tip. Patented rebar chamfers withstand impact from rebar and hard aggregate, and reduce Carbide chipping. To be used with drive sleeve available in the SDS-Plus Tapcon® installation kit (48-20-7497). Tapcon® is a registered trademark of Illinois tool works Inc.

5" X 5/8" -11 BACKING PAD KITS-MWK49363465 >

Drop forged wide blade chisel used to cut up and remove old asphalt sidewalk. One per package. Features: asphalt cutter. 1-1/8 in. collared hex shank with notch. 5 in. width x 17-1/2 in. overall length. Made from forged high grade steel.

Milwaukee® 49-12-0362 Sander Guard, For Use With Milwaukee® 6081-20 Sanders, 5 in Dia

Milwaukee's core bits are ideal for large hole drilling where depth is relatively shallow. The core bit cuts a Kerf only. The usable depth of thick wall core bits is 4-3/8 in. The inside core must be removed by the operator before deeper drilling can be accomplished. The thick wall construction is ideal for larger hammers and more seasoned/cured concrete. A 7-1/2 in. extension is available to allow for the deeper holes to be drilled. The appropriate (Dependant on the diameter) SDS Plus drive shank must be used to drive the core bit. Use 48-20-6155 center pin and 48-20-6162 guide plate for positioning and starting the hole. Thin wall core bits are available from 1 in. to 6 in. diameters. See thick wall core bits for cured concrete and/or larger hammers.

For materials up to 1/2 in. these Carbide tipped steel plate cutters produce fine, burr-free holes in a variety of materials. They are ideal for stainless steel, structural steel studs and electrical boxes. They can also improve your production in cast iron, brass, aluminum and other thin non-ferrous metals. The Carbide tips stay sharper longer than high-speed steel or bi-metal cutters giving these cutters longer life. Lubrication during drilling extends the life of the Carbide cutter. Milwaukee recommends the use of Hawg wash cutting fluid for best results. Hawg wash fluid is available in 16 oz. Bottles (49-32-0081). One bottle makes one gallon of lubricating solution. Arbors 49-57-0035 or 49-57-0037 are needed for these cutters.

Extend your reach 5-1/2 in. when drilling with Milwaukee selfed bits, auger bits and hole saws. The quick change shank is 7/16 in. hex. The 7/16 in. hex fits both 3 jawed chucks, 1/2 in. drill capacity and larger, as well as 7/16 in. quick change chucks.

Drop forged hammer iron with heat treated work areas used for digging in clay and hard dirt. One per package.

TRAPSNAKE™ 4 ft. Urinal auger presents a breakthrough in protection, ease of use, and durability over every urinal auger that exists today. This tool features a number of industry firsts including a fixed rubber boot for maximum porcelain protection, an integrated locking mechanism which holds the cable in place for easy telescoping extension, and replaceable cables to maximize the longevity of the tool. As part of the TRAPSNAKE™ porcelain auger system, the TRAPSNAKE™ 4 Ft. Urinal auger can also be put on the M12™ TRAPSNAKE™ driver, the first powered unit optimized for the challenges of porcelain fixtures. This unit delivers power and speed to work through tough clogs in tight traps, but has optimized electronics that protect the fixture from the auger and allow the user to feel when engaged with a blockage.

Maximize your band saw performance and make straight, accurate cuts in a variety of materials with the Milwaukee® 10 TPI standard/deep-cut portable band saw blade (100-Pack). Get exceptional durability and accuracy for your portable band saw that takes a 44-7/8 in blade. Milwaukee® standard/deep cut band saw blades deliver long tooth life in a variety of metal, including strut, conduit, angle iron, copper tube, threaded rod and pipe. The blade's tooth form, pitch and set ensure straight, accurate cuts time and time again.

This combination unit features the 4203 adjustable position, variable speed base and the 4253-1 1/2 in. drill motor. All you need is a bit and you are ready to drill into any ferrous material 1/2 in. and thicker.

This set offers a variety of driver bits for everyday use as well as rare applications. Made of premium grade S2 tool steel, these bits are heavy duty, designed for hard use.

The NEW MILWAUKEE® REDLITHIUM™ USB 400L Neck Light is 45% BRIGHTER FOR LONGER and the MOST DURABLE. This rechargeable neck light provides 400 lumens of TRUEVIEW™ High-Definition Output and over 8 hours of run-time to keep you working all day. 2 mode options allow you to manage output and run-time, plus a battery gauge in the power button will always inform you how much power you have left before a recharge is needed. The Milwaukee REDLITHIUM™ USB 400L Neck Light has 130° of vertical light head rotation for easy positioning and an ergonomic, sweat-resistant band for your comfort. The neck light has IP54 ingress protection against dust and water, chemical resistance to harsh chemicals found on site or in the shop, and a drop rating of 6ft, backed by our Limited Lifetime Warranty.

The MILWAUKEE® 40ft Wide Blade Tape Measures have the longest, straightest standout and up to 17' of reach* to take long measurements. The straightest standout* makes it easier to measure long distances alone by reducing blade arc. The tape measures are wear and impact-resistant with nylon bond blade protection and an additional coating on the first 6 in of the blade, reducing tape tear. The measuring tapes are constructed with a 5-point reinforced frame for impact resistance.

This set offers a variety of driver bits for everyday use as well as rare applications. Made of premium grade S2 tool steel, these bits are heavy duty, designed for hard use. With magnetic nut drivers in the most popular sizes, those hard to reach areas are a thing of the past. This kit also includes Torx® bits in common sizes for automotive, appliance and electronics applications. Torx® is a registered trademark of acumen intellectual properties, LLC.

Increase your precision in masonry and concrete drilling with the Milwaukee® guide plate for thick wall core bit. You'll see reduced bit walk and improved bit stability when you use Milwaukee's durable plastic guide plate and centering pin (not included) for starting holes with your SDS plus rotary hammer drill.

Increase your precision in masonry and concrete drilling with the Milwaukee® guide plate for thin wall core bit. You'll see reduced bit walk and improved bit stability when you use Milwaukee's durable plastic guide plate and centering pin (not included) for starting holes with your SDS plus rotary hammer drill.

4" CUP WHEEL GUARD ASSEMBLYS-MWK49120062>

4" CRIMPED WIRE WHEEL-MWK48521275 >

Milwaukee® carbide tipped hole saws provide long life and faster cutting in cement board, ceramic tiles, fiberglass and wood products such as fiberboard, flake board and plywood. Use a carbide tipped pilot bit (49-56-8005) when cutting ceramic tile, brick and other abrasive materials.

Milwaukee®'s SDS Plus thin wall core bits are used for drilling large through holes into brick, block, concrete. Includes core bit, guide plate, and centering pin.

Milwaukee® 49-93-5250 Cup Wheel, 4 in Dia, 16/24 Grit, Aluminum Oxide Abrasive

Get professional-grade performance with the Milwaukee® 4 in. 8 TPI high-carbon steel t-shank jig saw blade (5-Pack). These blades are designed and built to handle heavy-duty jobs. With Milwaukee's attention to blade material, tooth shape and sharpness, this is a reliable general-purpose blade for very fast cutting in wood. The T-shank allows for quick installation. Use with Milwaukee jig saw models 6266-6, 6276-6, 6267-20, 6267-21 and other popular brands.

Get professional-grade performance with the Milwaukee® 4 in. 8 TPI high-carbon steel u-shank jig saw blade (5-Pack). These blades are designed and built to handle heavy-duty jobs. With Milwaukee's attention to blade material, tooth shape and sharpness, this is a reliable general-purpose blade for very fast cutting in wood. This blade features a universal tang and fits Milwaukee jig saw model 6256-6 and other popular brands.