Pyramex CLASS-3 LIME FLEECE-LINED JACKETS PSP RJ-3110-M
Pyramex® RJ3110M Bomber Jacket, Hi-Viz Lime, Polyester Shell, 38 to 40 in Chest, Resists: Weather, ANSI Class 3 Type R
-
BrandPyramex®
-
UPC811907022725
-
Manufacturer Part NumberRJ3110M
-
CountryUSA
-
MaterialPolyester Shell
-
Chest Size38 to 40 in
-
Closure TypeFront Zip
-
ResistsWeather
-
ColorHi-Viz Lime
-
SeriesRJ31
-
Number of Pockets8
-
SizeM
-
Specifications MetANSI Class 3 Type R
- Weatherproof polyester shell with zip out polar fleece liner
- Weatherproof elastic band at the waist and wrists
- 2 in silver reflective material
- Concealed detachable hood
- Cell phone/radio chest pocket with clear panel on outside shell
- Mic tabs and pencil pocket
- Removable zip out polar fleece with hook and loop tabs to hold in place at the bottom and snap tabs to hold in place at the wrist
- Detachable drawstring hood has collar pouch to hide away hood when not in use
- (2) double tacked microphone tabs on left and right shoulders on front of jacket
- One 2 in China brand silver reflective stripe applied horizontally dividing black material from lime material
- Two 2 in China brand silver reflective stripes run vertically from top of horizontal stripes, over shoulders to top of back side horizontal stripe
- Two 2 in China brand silver reflective stripes around both long sleeves
- Lower stripe to divide black from lime material
- Upper stripe is applied 7-1/2 in higher on sleeve than lower stripe
- Outside left chest pocket is 3-1/2 x 5 in with clear plastic front and flap with hook and loop tab for closure - flap made from PU coated shell material
- Upper outside left chest pocket: zipper closure - reflective stripe covers pocket and two lower slash pockets with zipper closure
- Left arm pocket is 3 x 5 in - divided into half for pen/pencil holders
- Inside left chest pocket is 6 x 7 in with hook and loop tab closure and nylon tape pull and inside right chest pocket is 8-1/2 x 6 in with black nylon zipper closure
- Inside right chest sewn pocket is 4 x 5-1/2 in sewn-on top of bottom layer inside chest pocket made from nylon mesh with hook and loop tab closure with nylon tape pull
-
UNSPSC46181533
-
Standards/ApprovalsANSI/ISEA 107-2015 Type R Class 3
-
Catalog
-
Specification Sheet
Recently Viewed
Pyramex® RJ3110M Bomber Jacket, Hi-Viz Lime, Polyester Shell, 38 to 40 in Chest, Resists: Weather, ANSI Class 3 Type R
Proto® J296 Wire Stripper Plier, 30 to 22 AWG Solid/Stranded Cable, 6-1/16 in OAL
Milton Industries specializes in Tire Inflator Gauges were the very first in the industry to offer replacement cartridges! Gauge and valve cartridges are both replaceable. This essential pneumatic tool is ideal for any vehicle trunk, home garage or automotive shop. Dual head chuck inflator gauge, where one of the heads is parallel to the extension. Both heads have the feature to lock onto the threads which enable the user to not have to hold the chuck while inflating. Made of heavy duty construction which provides for long life, even under extreme use and conditions. Equipped with magnifying lens for full view of scale. Full-swivel chuck.
The Makita® 18 V LXT® Li-ion battery charges faster and works longer than standard Li-ion batteries, giving you and your cordless tools unmatched performance and productivity to take on the most demanding applications. The Makita® 6 Ah battery, model BL1860B, combines more run time (two-times more run time per charge than the Makita® 3 Ah battery) with a category-leading charge time of only 55 min so it spends more time working and less time sitting on the charger. For added convenience, it also features an on-board L.E.D. charge level indicator to monitor battery charge. The 18 V LXT® 6.0Ah battery is compatible only with Star Protection tools, indicated by the Star Symbol™ and/or Yellow Battery Receiver under the tool. There are over 125 Makita® 18 V cordless tools with Star Protection and more are on the way. Makita® 18 V Li-ion batteries resist self-discharge so they're ready for use even after long periods of storage. The Makita® rapid optimum charger (sold separately) is a smart-charging system that communicates with the battery during the charging process to monitor current, voltage and temperature. This advanced charging technology helps optimize battery life and deliver a faster charge. In addition, the charger has a built-in fan to cool the battery for faster and more efficient charging, even in hot weather conditions. For improved tool performance and extended battery life, Makita® created STAR Protection Computer Controls™. STAR Protection is communication technology that allows the tool and battery to exchange data in real time and monitor conditions during use to protect against overloading, over-discharging and overheating. Makita®, the innovation leader in cordless tool technology, has the world's cordless tool line-up powered by an 18 V Li-ion slide-style battery.
Pyramex® SB8660D Lightweight Safety Eyewear, Anti-Scratch, Infinity Blue Lens, Half-Frame Frame, Black, Polycarbonate Frame, ANSI Z87.1, CAN/CSA Z94.3-15, CE EN166, MIL-PRF 32432
Milwaukee® 2967-22 M18 FUEL™ High Torque Impact Wrench, 1/2 in Drive Square Drive, 0 to 2400 ipm, 1100 ft-lb Fastening/1500 ft-lb Nut-Busting Torque Rating, 18 V, 7.6 in OAL
The MILWAUKEE® M18 FUEL™ ½” High Torque Impact Wrench w/ Friction Ring is the most power-dense impact wrench in its class, provides greater access in tight spaces, and maximizes productivity through faster removal speeds. The POWERSTATE™ Brushless Motor delivers up to 1,100 ft-lbs of Fastening Torque and 1,600 ft-lbs of Nut-Busting Torque when paired with the M18™ REDLITHIUM™ FORGE™ Batteries, while the compact size at 7.6" in length gives users greater access in tight spaces. The M18 FUEL™ ½” High Torque Impact Wrench w/ Friction Ring maximizes productivity on the jobsite and in the shop by removing stubborn bolts and fasteners faster than cordless competitors. The patented battery isolation system provides a secure battery connection and controls vibration transmitted to the pack. Tri-LEDs surround the anvil to deliver brighter light with fewer shadows. 4-Mode DRIVE CONTROL™ offers greater precision with a range of pre-set RPM and IPM levels, selectable from a single button on the tool. By selecting Mode 4, AUTO SHUT-OFF™ control applies no more than 50 ft-lbs of torque for hand-tight fastening applications to prevent overtightening. Mode 4 also features Bolt Removal Control that delivers users full torque output, then decreases RPMs once the bolt is loosened to prevent fastener drops. The ½” Friction Ring design allows for quick & tool-free socket changes.
