Martin Sprocket & Gear
Martin 14-TOOTH #60-1 CHAIN SPROCKETS MAI 60-BS-14-F1-1/4
These finished bore sprockets are shaft ready and come complete with keyways and setscrews. The keyways are on center line of the tooth. Bored to size sprockets with 1/2 in bores and smaller are stocked with (2) setscrews only.
These finished bore sprockets are shaft ready and come complete with keyways and setscrews. The keyways are on center line of the tooth. Bored to size sprockets with 1/2 in bores and smaller are stocked with (2) setscrews only.
Martin 100E25 QD Bushed Type B1 Single Pitch Roller Chain Sprocket, 10.645 in OD, #100 Chain, 25 Teeth, 1-1/4 in Pitch, Steel
QD (quick detachable)is a sprocket where a tapered bushing is bolted into the taper bore that is machined in the sprocket. When installed this bushing is compressed onto the shaft providing a tight grip.
QD (quick detachable) bushings are designed for conventional mounting or reverse mounting. These bushings have a flange.
Martin 2012 1 7/8 Standard Taper Lock Bushing, 1-7/8 in Dia Bore, 2-3/4 in Dia Barrel, 1-1/4 in OAL, Steel
Nylatron bearings are used as support bearings for drive and screw conveyor shafts. This self-lubricating hanger bearing can withstand temperatures up to 250 deg F and is compatible with 220 and 19B style hangers. It is recommended for grain, feed and chemical handling applications due the very low load capacity attribute.
QD (quick detachable)is a sprocket where a tapered bushing is bolted into the taper bore that is machined in the sprocket. When installed this bushing is compressed onto the shaft providing a tight grip.
Martin Quadra-Flex® is a proven design which offers long life, torsional flexibility, ease of installation and withstands misalignment, shock and vibration. Available in sizes 3 to 16 in bored to size, QD bushed, spacer type and plain bore for custom requirements.
Martin timing pulleys are manufactured to extremely close specifications and are stocked in minimum plain bore, taper bushed, QD bushed styles depending on size and pitch. Synchronous sprockets are non-slip toothed drives that require no lubrication. These sprockets have a wide speed range, are very efficient and make less noise than chain drives. Teeth on the belts are molded to conform with and engage the teeth on a mating sprocket.
Recently Viewed
Whether you're looking for a tailgate chain or an industrial chain, this grade 30 proof coil domestic chain will cater to a variety of needs. It's a general utility chain for farm, industrial and home applications such as: log chain, cargo lashing, pipeline hanging, tailgate, guard rail, tow and switch chain. This Domestic chain is made from carbon steel and comes in a self-colored finish or galvanized finish. Recognized and meets or exceeds OSHA, government, NACM and ASTM specification requirements. Order unit is foot. Not for overhead lifting.
Smith Bearing® SMITH-TRAX® FCR-1-1/2 Heavy Duty Stud Type Deep Groove Ball Bearing Track Roller, 1-1/2 in Dia Roller, 1-3/16 in W Roller, 2-3/16 in Dia Flange, 5/8 in Dia Stud, 1-1/2 in L Stud
FCR Series bearings are designed to handle both axial and radial loads by using tapered roller bearings or deep groove ball bearings. These bearings should be used when standard needle roller bearings are not sufficient to handle the thrust load found in certain applications.
Browning 13-TOOTH #80-1 CHAIN SPROCKETS BRW H-8013 X 1-7/8
Browning® finished bore sprockets are offered in single strands. Offerings include 35 to 100 pitch range. Finished bore sprockets are available from 3/8 to 2-7/16 in. Hardened teeth are available up to 30 teeth.
5/8″ Rope, 6″ OD SAE 841 Bearing, 0.75 Shaft Size, 1.0625″ Hub width Forged Steel
42" X 30" 5900-LB CAPACITY ALUMINUM DOCKPLATE - VESEH4230>
1/4" 1/2"-DRIVE X-LONG HEXDRIVERS-PROJ54411/4XL>
