Klein Tools
D-224-4-1/2-C KLEIN TOOLS Electronics End-Cutting pliers, 4-1/4" spring-loaded, self-opening, plastic dipped royal blue
4-5/8" END-CUTTING PLIERS-
D-245-5-C KLEIN TOOLS Hot Riveted Diagonal Cutting Plier With Coil Spring, 11/16 in L x 9/16 in W x 3/8 in THK Jaw Tool Steel Jaw Short Jaw, 5-1/16 in OAL, Single Cut
5" TPR/NOSE DIAGONAL CUTTING PLIER-
D-307-5-1/2-C KLEIN TOOLS Pliers, Needle Nose Pliers, Slim, 1/32-Inch Point Diameter, 5-Inch
Pliers with longer nose and handles for deeper reach into work
Knurled jaws for sure wrapping and looping, pliers are spring-loaded for self-opening action
Curved handles provide greater tool control
Hot-riveted joint for smooth action and no handle wobble
Forged in the USA with custom, US-made tool steel for maximum durability
D-310-6-C KLEIN TOOLS Tapered Needle Nose Pliers, 6"
Larger and sturdier yet tapered design allows access into tight areas
Knurled jaws for sure wrapping and looping
Spring-loaded for self-opening action
Curved handles provide greater tool control
D-503-10 KLEIN TOOLS 10'' Pipe-Wrench Pliers Angled Head
90° angled jaws provide 20% more leverage than 32° angled jaws.
Secure tongue and groove design for non-slip grip even with heavy pressure.
Seven versatile jaw positions.
Handle stop design eliminates pinched fingers.
D2036-6-SC-PC KLEIN TOOLS Needle-Nose Side-Cutting Pliers, 6-Inch
Extra length for added reach in confined areas.
Knurled jaws for sure wrapping and looping.
Spring-loaded for self-opening action.
Curved handles provide greater tool control.
D320-4-1/2-C KLEIN TOOLS Electronics Pliers, Needle Nose with Curved Chain-Nose,
Needle Nose Pliers have 60-degree bent nose for maximum work visibility in confined areas
Easily bends and forms fine wire
Polished inside jaws and radiused jaw edges prevent nicking wire
Curved handles provide greater tool control and spring-loaded for self-opening action
Forged in the USA with custom, US-made tool steel for maximum durability
Hot-riveted joint for smooth action and no wobble handle
J-2000-28 Journeyman Diagonal Cutting
JOURNEYMAN DIAGONAL CUTTING PLIER-KLEJ200028 >
J-2106-S KLEIN TOOLS Offset Long Blade Journeyman Snip
Forged steel cutting blades for superior strength and durability.
Soft touch grips for maximum control and comfort.
Feature exclusive Klein Kurve® handles for natural hand positioning and ease of use.
Cut 20 gauge cold rolled steel and 24 gauge stainless steel, with a 2-3/8'' (60 mm) length of cut for faster cutting.
J-213-9-NECR KLEIN TOOLS Journeyman™ Pliers Connector Crimp Side Cut 9-Inch
Pliers with crimping die behind hinge for superior leverage crimping non-insulated connectors, lugs and terminals
High-leverage design; rivet is closer to the cutting edge for 46-percent greater cutting and gripping power than other plier designs
Unique handle tempering helps absorb the snap when cutting wire
Hot-riveted joint ensures smooth action and no handle wobble
Made in USA with Custom, US-made tool steel
Streamlined design with sure-gripping, cross-hatched knurled jaws
Precision machined knives cut cleanly and crisply even on fine stranded wire, mule tape and pull line
State-of-the-art, dual-material Journeyman™ handles provide a better grip without sacrificing tool strength and durability
Hard, black material for toughness and durability
Soft material on outer surface for comfort and firm grip
Handform handles for full gripping and cutting power
J-248-8 8" Journeyman Diagonal Cutting
8" JOURNEYMAN DIAGONAL CUTTING PLIER-KLEJ2488 >
KELIN TOOLS 630-7/16 7/16-Inch Hollow Nut Driver, 3-Inch, Cushion-Grip™
Standard length for most applications, fits over long bolts and studs
Full hollow shafts facilitate work on stacked circuit boards or other long bolt applications
Internal flanges provide solid, twist-resistant shaft anchor
Premium chrome plated for smooth feel and corrosion resistance
Made in USA
Meets or exceeds applicable ASME / ANSI specifications
Handle end is also color coded for easy identification
Cushion-Grip™ handle allows for greater torque and comfort
Tip-Ident® quickly identifies nut driver and size
KLEIN 630-7/16-INS Insulated 7/16'' Nut Driver, Hollow-Shaft
Individually tested to exceed the IEC 60900 and ASTM F1505 standards, for insulated tools, and clearly marked with the official 1000-volt rating symbol.
Two layers of insulation provide protection against electric shock.
Thick, exceptionally tough, high-dielectric white inner coating is bonded to the tool.
A flame retardant, impact-resistant, bright orange outer coating.
Hollow shafts make it possible to work on stacked circuit boards or other long bolt applications.
Tip-Ident quickly identifies nut driver size.
Klein 1224HS Hacksaw Blade 24 TPI 12"
Klein 1224HS High-Speed 24 Teeth Per Inch Hacksaw Blade 12"
Fits all 12" Hacksaws
High-speed steel blade
Precision Ground Teeth
Klein hacksaw blades provide easy cutting and longer blade life.
KLEIN 2100-8 Stainless Steel Free Fall Electrician
2100-8
Free-Fall Snip Stainless Steel
Free-Fall Electrician Scissors crafted from premium stainless steel, engineered to maintain sharpness and deliver long-lasting, precise performance on every cut
Fully serrated top blade for a secure, non-slip grip
Easily strips 19 and 23 AWG wire
Free-fall design and extended rings allows for smooth, reliable cuts
Made in the USA with high-quality materials and American craftsmanship
Scraper and file on both blades for cleaning oxidation from copper wires
Klein 50151 50 Ft.Heavy Duty Klein-FlexA spiral Fish Tape W/ Reel Max 500 Lbs
50' HEAVY DUTY FLEX FISH TAPE WITH REEL
KLEIN 50505 Ratchet Dog For Kle50500 Pvc Cutter
RATCHET DOG FOR KLEIN 50500 PVC CUTTER
KLEIN 506-4 4" Chrome Adjustable Wrench
D506-4 Wrench 4" Adjustable w/Plastic Dip Handle Plastic-dipped handles for added comfort Forged heat-treated alloy steel for maximum strength and light weight
High polish chrome finish
Precision-machined jaws are individually chosen and assembled by hand for smooth operation
Heat-treated for long life
Knurl turns smoothly for easy operation
Rail is ground for precision fit
Contoured handles for comfortable use
Chrome-plated for rust resistance
KLEIN 506-8 8"Extra-Wide Jaw Adjustable Wrench, 8-Inch
Extra-Wide Jaw Adjustable Wrench provides greater capacity in tight work spaces
Knurl turns smoothly for easy one-handed operation
Made with alloy steel to handle the torque and wear of tough jobs
Forged heat-treated alloy steel ensures maximum strength and lightness for optimum performance
Chrome plated for maximum rust resistance
Large loop hole in the handle for tethering or hanging on a peg
Contoured dipped handle for extra grip and comfort
KLEIN 507-8 Adjustable Wrench, Extra-Capacity, 8-Inch
Extra capacity allows use of a smaller size wrench to handle bigger jobs, especially in confined spaces
Forged heat-treated alloy steel for light weight maximum strength and long life
High polish chrome finish is rust resistant
Precision-machined jaws are individually chosen and assembled by hand for smooth operation
Contoured handles for comfortable use
Knurl turns smoothly for easy operation
Rail is ground for precision fit
KLEIN 508-8 8" Black Finish Adjustable Wrench
Klein® 508-8 Standard Capacity Adjustable Wrench, 15/16 in, Industrial Black, 8-1/4 in OAL, Forged Alloy Steel Body, Forged Alloy Steel
KLEIN 5105-24 24 Canvas Tool Bag
Heavy-duty No. 8 natural canvas
Bottom and 8-Inch (203 mm) of lower sides are covered with moisture-resistant vinyl
Non-scratch studs on base protect against wear
Steel-frame mouth with hinge for rugged use
Harness-leather handles with two retaining straps and buckles
KLEIN 51201 1/2" Emt Elec/conduit Bender
Klein Tools Bender Head, 1/2 in. EMT, 3/4 in. IPS Handle, Malleable Iron #51201
KLEIN 51203 1" Emt Electrical Conduit
Klein 51203 Tool, Conduit Bender Head, For 1" Emt, 3/4" .
Recently Viewed
1-TIER LOCKER-PNC6115V028>
1-7/16" -ID JAW TYPE COUPLING 2-1-1/16" X 3-1/2" X 1-7/16"-BRWCHJP5X17/16 >
DascoPro 400-0 Cold Chisel, 1/4 in High Carbon Steel Tip, 4-7/8 in OAL
Combination Wrench, 5/16 in, Chrome Vanadium Steel, Polished Chrome
1-1/2" X 144 USS ZINC THREADED ROD-NBS9991501200 >
Apex® M-13MM15 Magnetic Socket, Standard Style, 1/2 in Square Drive, 13 mm 6-Point/Hex Socket, 6 Points
Apex® M-13MM15 Magnetic Socket, Standard Style, 1/2 in Square Drive, 13 mm 6-Point/Hex Socket, 6 Points
