Klein Tools
Klein Tools 612-4 Screwdriver, Made in USA, Flat Head Terminal Block Screwdriver, 1/8-Inch Cabinet Tip, 4-Inch Round Shank, TB-DIN
Precision machined tip provides exact fit for terminal block screws
1/8-Inch (3.2 mm) cabinet tip is up to 19-Percent stronger than competitors
Tip provides 76-Percent higher torque value than the required ASME B107 Standard
Cushion-Gripâ„¢ handle offers greater torque comfort
KLEIN TOOLS 620-6 5/16-Inch Cabinet Screwdriver, Coated, 6-Inch Round Shank
Plastic coated for circuit protection only. NOT INSULATED
Special plastic coating resists cutting, cracking, and chipping
Thin coating permits use in confined areas
Cushion-Gripâ„¢ handle for greater torque and comfort and premium chrome-plated for smooth feel and corrosion resistance
Made in USA
Internal flanges inside handle provide solid, twist-resistant blade anchor
Special heat-treated shafts
Precision-machined tip for exact fit
Meets or exceeds applicable ASME / ANSI specifications
Tip-Ident® quickly identifies the screwdriver type and tip orientation
KLEIN TOOLS 620-8 3/8-Inch Cabinet Screwdriver, Coated, 8-Inch Round Shank
Plastic coated for circuit protection only. NOT INSULATED
Special plastic coating resists cutting, cracking, and chipping
Thin coating permits use in confined areas
Cushion-Gripâ„¢ handle for greater torque and comfort and premium chrome-plated for smooth feel and corrosion resistance
Made in USA
Internal flanges inside handle provide solid, twist-resistant blade anchor
Special heat-treated shafts
Precision-machined tip for exact fit
Meets or exceeds applicable ASME / ANSI specifications
Tip-Ident® quickly identifies the screwdriver type and tip orientation
KLEIN TOOLS 621-10 Coated 3/16-Inch Cabinet Tip Screwdriver, 10-Inch
Plastic coated for circuit protection only. NOT INSULATED.
Special plastic coating resists cutting, cracking, and chipping.
Thin coating permits use in confined areas.
Cushion-Gripâ„¢ handle for greater torque and comfort.
Premium chrome-plated for smooth feel and corrosion resistance.
Internal flanges inside handle provide solid, twist-resistant blade anchor.
Special heat-treated shafts.
Precision-machined tip for exact fit.
Meets or exceeds applicable ASME / ANSI specifications.
Tip-Ident® quickly identifies the screwdriver type and tip orientation.
KLEIN TOOLS 621-6 Coated 3/16-Inch Cabinet Tip Screwdriver, 6-Inch
Plastic coated for circuit protection only. NOT INSULATED
Special plastic coating resists cutting, cracking, and chipping
Thin coating permits use in confined areas
Cushion-Gripâ„¢ handle for greater torque and comfort and premium chrome-plated for smooth feel and corrosion resistance
Made in USA
Internal flanges inside handle provide solid, twist-resistant blade anchor
Special heat-treated shafts
Precision-machined tip for exact fit
Meets or exceeds applicable ASME / ANSI specifications
Tip-Ident® quickly identifies the screwdriver type and tip orientation
KLEIN TOOLS 621-8 8" Coated 3/16-Inch Cabinet Tip Screwdriver, 8-Inch
Plastic coated for circuit protection only. NOT INSULATED
Special plastic coating resists cutting, cracking, and chipping
Thin coating permits use in confined areas
Cushion-Gripâ„¢ handle for greater torque and comfort and premium chrome-plated for smooth feel and corrosion resistance
Made in USA
Internal flanges inside handle provide solid, twist-resistant blade anchor
Special heat-treated shafts
Precision-machined tip for exact fit
Meets or exceeds applicable ASME / ANSI specifications
Tip-Ident® quickly identifies the screwdriver type and tip orientation
KLEIN TOOLS 626-24Replacement Tap for Triple Taps
Replacement Tap for Cat. No. 625-24 (Triple Taps)
Lightweight, durable design
Multiple applications
Sold in quantity of 2
Tap sizes: 6-32, 8-32, 10-24
KLEIN TOOLS 626-32 Replacement Tap for 625-32 and 627-20
Replacement Tap for Klein Tools Triple Tap and Six In One Models 625-32, 627-20, 623-32 and 626
Lightweight, durable design
Multiple applications
Sold in quantity of 2
#6, #8, #10 thread spacing
Tap Sizes 10-32, 8-32, 6-32
KLEIN TOOLS 628-20 Replacement Tap for Cat. No. 627-20
Replacement Tap for Cat. No. 627-20
Lightweight, durable design
Multiple applications
Sold in quantity of 2
Tap sizes: 10-24, 12-24, 1/4-20
KLEIN TOOLS 630-1/2-INS Insulated 1/2'' Nut Driver Hollow Shank
Individually tested to exceed the IEC 60900 and ASTM F1505 standards, for insulated tools, and clearly marked with the official 1000-volt rating symbol.
Two layers of insulation provide protection against electric shock.
Thick, exceptionally tough, high-dielectric white inner coating is bonded to the tool.
A flame retardant, impact-resistant, bright orange outer coating.
Hollow shafts make it possible to work on stacked circuit boards or other long bolt applications.
Tip-Ident quickly identifies nut driver size.
Cushion-Gripâ„¢ handles for greater torque and comfort.
KLEIN TOOLS 630-1/21/2-Inch Nut Driver, 3-Inch Shaft, Cushion-Gripâ„¢
Standard length for most applications; fits over long bolts and studs
Full hollow shafts facilitate work on stacked circuit boards or other long bolt applications
Internal flanges provide solid, twist-resistant shaft anchor
Premium chrome plated for smooth feel and corrosion resistance
Made in USA
Meets or exceeds applicable ASME / ANSI specifications
Handle end is also color coded for easy identification
Cushion-Gripâ„¢ handle allows for greater torque and comfort
Tip-Ident® quickly identifies nut driver and size
KLEIN TOOLS 630-1/4 1/4-Inch Nut Driver 3-Inch Shaft Cushion-Gripâ„¢
Standard length for most applications; fits over long bolts and studs
Full hollow shafts facilitate work on stacked circuit boards or other long bolt applications
Internal flanges provide solid, twist-resistant shaft anchor
Premium chrome plated for smooth feel and corrosion resistance
Made in USA
Meets or exceeds applicable ASME / ANSI specifications
Handle end is also color coded for easy identification
Cushion-Gripâ„¢ handle allows for greater torque and comfort
Tip-Ident® quickly identifies nut driver and size
KLEIN TOOLS 630-1/4-INS Insulated 1/4'' Nut Driver Hollow Shaft
Individually tested to exceed the IEC 60900 and ASTM F1505 standards, for insulated tools, and clearly marked with the official 1000-volt rating symbol.
Two layers of insulation provide protection against electric shock.
Thick, exceptionally tough, high-dielectric white inner coating is bonded to the tool.
A flame retardant, impact-resistant, bright orange outer coating.
Hollow shafts make it possible to work on stacked circuit boards or other long bolt applications.
Tip-Ident quickly identifies nut driver size.
Cushion-Gripâ„¢ handles for greater torque and comfort.
KLEIN TOOLS 630-11/32 11/32-Inch Nut Driver 3-Inch Cushion-Gripâ„¢
Standard length for most applications; full hollow shaft fits over long bolts and studs
Internal flanges provide solid, twist-resistant shaft anchor
Handle end is also color coded for easy identification
Premium chrome plated for smooth feel and corrosion resistance
Made in USA
Meets or exceeds applicable ASME / ANSI specifications
Tip-Ident® quickly identifies nut driver and size
Cushion-Gripâ„¢ handle allows for greater torque and comfort
KLEIN TOOLS 630-11/32-INS Insulated 11/32'' Nut Driver Hollow
Individually tested to exceed the IEC 60900 and ASTM F1505 standards, for insulated tools, and clearly marked with the official 1000-volt rating symbol.
Two layers of insulation provide protection against electric shock.
Thick, exceptionally tough, high-dielectric white inner coating is bonded to the tool.
A flame retardant, impact-resistant, bright orange outer coating.
Hollow shafts make it possible to work on stacked circuit boards or other long bolt applications.
Tip-Ident quickly identifies nut driver size.
Cushion-Gripâ„¢ handles for greater torque and comfort.
KLEIN TOOLS 630-3/16-INS Insulated 3/16'' Nut Driver, Hollow-Shaft
Individually tested to exceed the IEC 60900 and ASTM F1505 standards, for insulated tools, and clearly marked with the official 1000-volt rating symbol.
Two layers of insulation provide protection against electric shock.
Thick, exceptionally tough, high-dielectric white inner coating is bonded to the tool.
A flame retardant, impact-resistant, bright orange outer coating.
Hollow shafts make it possible to work on stacked circuit boards or other long bolt applications.
Tip-Ident quickly identifies nut driver size.
Cushion-Gripâ„¢ handles for greater torque and comfort.
KLEIN TOOLS 630-3/163/16-Inch Nut Driver, 3-Inch Hollow Shaft, Cushion-Gripâ„¢
Full hollow shafts facilitate work on stacked circuit boards or other long bolt applications
Fits over long bolts and studs; internal flanges provide solid, twist-resistant shaft anchor
Premium chrome plated for smooth feel and corrosion resistance
Meets or exceeds applicable ASME / ANSI specifications
Made in USA
Handle end color coded for easy identification
Cushion-Gripâ„¢ handle for greater torque and comfort
Tip-Ident® quickly identifies nut driver and size
KLEIN TOOLS 630-3/8 3/8-Inch Nut Driver with 3-Inch Hollow Shaft
Standard length for most applications; fits over long bolts and studs
Full hollow shafts facilitate work on stacked circuit boards or other long bolt applications
Internal flanges provide solid, twist-resistant shaft anchor
Premium chrome plated for smooth feel and corrosion resistance
Made in USA
Meets or exceeds applicable ASME / ANSI specifications
Handle end is also color coded for easy identification
Cushion-Gripâ„¢ handle allows for greater torque and comfort
Tip-Ident® quickly identifies nut driver and size
KLEIN TOOLS 630-5/16 5/16-Inch Nut Driver Cushion-Gripâ„¢ 3-Inch Shaft
Standard length for most applications, fits over long bolts and studs
Full hollow shafts facilitate work on stacked circuit boards or other long bolt applications
Internal flanges provide solid, twist-resistant shaft anchor
Premium chrome plated for smooth feel and corrosion resistance
Made in USA
Meets or exceeds applicable ASME / ANSI specifications
Handle end is also color coded for easy identification
Cushion-Gripâ„¢ handle allows for greater torque and comfort
Tip-Ident® quickly identifies nut driver and size
KLEIN TOOLS 630-5/16-INS Insulated 5/16'' Nut Driver, Hollow-Shaft
Individually tested to exceed the IEC 60900 and ASTM F1505 standards, for insulated tools, and clearly marked with the official 1000-volt rating symbol.
Two layers of insulation provide protection against electric shock.
Thick, exceptionally tough, high-dielectric white inner coating is bonded to the tool.
A flame retardant, impact-resistant, bright orange outer coating.
Hollow shafts make it possible to work on stacked circuit boards or other long bolt applications.
Tip-Ident quickly identifies nut driver size.
Cushion-Gripâ„¢ handles for greater torque and comfort.
KLEIN TOOLS 630-5/8-Ins Nut Driver, Hollow-Shaft
Individually tested to exceed the IEC 60900 and ASTM F1505 standards, for insulated tools, and clearly marked with the official 1000-volt rating symbol.
Two layers of insulation provide protection against electric shock.
Thick, exceptionally tough, high-dielectric white inner coating is bonded to the tool.
A flame retardant, impact-resistant, bright orange outer coating.
Hollow shafts make it possible to work on stacked circuit boards or other long bolt applications.
Tip-Ident quickly identifies nut driver size.
Cushion-Gripâ„¢ handles for greater torque and comfort.
KLEIN TOOLS 630-9/16-INS 9/16-Inch Nut Driver 6-Inch Hollow Shaft
Reaches into deep recesses and fits over extra-long bolts and studs
Full hollow shafts facilitate work on stacked circuit boards or other long bolt applications
Internal flanges provide solid, twist-resistant shaft anchor
Premium chrome plated for smooth feel and corrosion resistance
Made in USA
Meets or exceeds applicable ASME / ANSI specifications
Handle end is also color coded for easy identification
Cushion-Gripâ„¢ handle allows for greater torque and comfort
KLEIN TOOLS 646-1/2 1/2-Inch Nut Driver with 6-Inch Hollow Shaft
Reaches into deep recesses and fits over extra-long bolts and studs
Full hollow shafts facilitate work on stacked circuit boards or other long bolt applications
Internal flanges provide solid, twist-resistant shaft anchor
Premium chrome plated for smooth feel and corrosion resistance
Made in USA
Meets or exceeds applicable ASME / ANSI specifications
Handle end is also color coded for easy identification
Cushion-Gripâ„¢ handle allows for greater torque and comfort
Tip-Ident® quickly identifies nut driver and size
KLEIN TOOLS 646-1/4 1/4-Inch Nut Driver with 6-Inch Hollow Shaft
Reaches into deep recesses and fits over extra-long bolts and studs
Full hollow shafts facilitate work on stacked circuit boards or other long bolt applications
Internal flanges provide solid, twist-resistant shaft anchor
Premium chrome plated for smooth feel and corrosion resistance
Made in USA
Meets or exceeds applicable ASME / ANSI specifications
Handle end is also color coded for easy identification
Cushion-Gripâ„¢ handle allows for greater torque and comfort
Tip-Ident® quickly identifies nut driver and size
Recently Viewed
HOBBY KNIFE SET-RGL19270 >
5" X 1-1/2" 300# SWIVEL CASTERS-PJCLT515PS62S >
1-TON SOLID STEEL PALLET PULLER-JET140001 >
Dodge® 4248 D-Flex Type JES Coupling Sleeve, 06 Coupling, 1-7/8 in L, 3-3/4 in OD, 6000 rpm Max, EPDM Rubber
Dodge® 4248 D-Flex Type JES Coupling Sleeve, 06 Coupling, 1-7/8 in L, 3-3/4 in OD, 6000 rpm Max, EPDM Rubber
10-MM X 10-MM X 62-MM METRIC STUDS, GRADE 8" MEDIUM HEAT
TREATED ALLOY STEEL
PALLET RACK UPRIGHTS-MECU0072881>
