Klein Tools
Klein® 1014 Cable Stripper, 14 AWG Romex®, Solid Cable, 6-1/4 in OAL, Steel Body
Klein® 1014 Cable Stripper, 14 AWG Romex®, Solid Cable, 6-1/4 in OAL, Steel Body
Klein® 1011 Insulated Wire Stripper/Cutter, 22 to 12 AWG Stranded, 20 to 10 AWG Solid Cable/Wire
The versatile Klein Tools Multi-Purpose Wire Stripper and Cutter can strip six standard wire sizes without nicking the wire. The scissor action of the cutting jaw makes clean cuts with little effort. Plastic-covered handles are comfortable to use.
The Klein Tools Wire Stripper Long Nose Multi Tool handles a wide range of functions, from wire and bolt cutting to stripping and crimping. The cutting and stripping holes are positioned in front of the pivot to easily fit into tight spaces. Plastic-covered cushioned handles make this tool comfortable to use.
The Klein Tools Wire Stripper Long Nose Multi Tool handles a wide range of functions, from wire and bolt cutting to stripping and crimping. The cutting and stripping holes are positioned in front of the pivot to easily fit into tight spaces. Plastic-covered cushioned handles make this tool comfortable to use.
Klein Tools Crimping and Cutting Tool is designed for crimping non-insulated solderless terminals and connectors. Wire cutter in nose specially hardened for durability. Tapered nose allows you to work in confined spaces.
Klein® 1005-INS Hot Riveted Joint Insulated Crimping/Cutting Tool, 22 to 10 AWG Cable/Wire
The Klein Tools Insulated Crimping/Cutting Tool crimps wire from 10 to 22 AWG. This crimper/cutter features a tapered nose for working in confined spaces. Additionally, it features bright orange outer coating on the handles that is flame retardant and impact resistant.
The Klein Tools Crimping and Cutting Tool crimps both insulated and non-insulated 10-22 AWG terminals and connectors. The tapered nose which is great when working in tight spaces. The wire cutter in the nose specially hardened for long life.
Klein® 1004 Adjustable Wire Stripper, 26 to 12 AWG Solid/Stranded Cable, 5 in OAL
Klein Tools 1004 Wire Stripper and Cutter is a handy, light, compact tool for stripping insulation. Spring-loaded for action for self-opening. Convenient hole for looping or bending wire. Adjustable slide stop with set screw for repeat stripping work.
Klein® 1003 Adjustable Wire Stripper, 26 to 12 AWG Solid/Stranded Cable, 5 in OAL
Klein Tools' 1003 Wire Stripper and Cutter is a handy, light, compact tool for stripping 12-26 AWG solid and 14-28 AWG stranded wire. Features convenient hole for looping or bending wire. Adjustable slide stop with set screw for repeat stripping work.
Klein® 1002 Multi-Purpose Standard Wire Stripper, 22 to 10 AWG Cable/Wire
Klein® 1002 Multi-Purpose Standard Wire Stripper, 22 to 10 AWG Cable/Wire
Klein® 1001 Multi-Tool Electrician's Wire Stripper/Cutter, 22 to 8 AWG Stranded, 26 to 10 AWG Cable/Wire, 7 to 8 mm Shearing
The Klein Tools Wire Stripper Multi-Tool cuts, crimps, and strips solid and stranded wire and shears bolts. Two cutting blades for 8-22 AWG solid and 10-26 AWG stranded wire. The crimping function handles 7-8 mm insulated and non-insulated terminals, lugs, and splices.
Klein® 1001 Multi-Tool Electrician's Wire Stripper/Cutter, 22 to 8 AWG Stranded, 26 to 10 AWG Cable/Wire, 7 to 8 mm Shearing
The Klein Tools Wire Stripper Multi-Tool cuts, crimps, and strips solid and stranded wire and shears bolts. Two cutting blades for 8-22 AWG solid and 10-26 AWG stranded wire. The crimping function handles 7-8 mm insulated and non-insulated terminals, lugs, and splices.
Klein® 1000 6-In-1 Multi-Purpose Stripper, 26 to 10 AWG Stranded, 22 to 8 AWG Solid Cable/Wire
This Multi Tool performs 6 different functions with the same tool. It gauges, cuts and strips wire, measures and shears machine screws and crimps insulated terminals and connectors. Use the threaded holes to easily measure the size of a machine screw and cut it if needed. The plastic-covered handles are cushioned for added comfort.
Klein® 1000 6-In-1 Multi-Purpose Stripper, 26 to 10 AWG Stranded, 22 to 8 AWG Solid Cable/Wire
This Multi Tool performs 6 different functions with the same tool. It gauges, cuts and strips wire, measures and shears machine screws and crimps insulated terminals and connectors. Use the threaded holes to easily measure the size of a machine screw and cut it if needed. The plastic-covered handles are cushioned for added comfort.
KLEIN TOOLS601-6-INS Insulated 3/16'' Cabinet - 6'' Screwdriver
1000V rated for safety.
Two layers of insulation provide protection against electric shock.
Klein insulated tools are individually tested to exceed IEC 60900 and ASTM F1505 standards for insulated tools.
Custom US-made tool steel.
Cushion-Gripâ„¢ handle for superior torque and comfort.
Perfect for electrical, telephone and work in recessed holes and other tight spaces.
This item has been discontinued and replaced by the 601-7-INS.
#12/#16 6" SLOTTED-TIP OFFSET SCREWDRIVER
Designed for confined hard-to-reach applications.
Two tip sizes for added convenience
Overall length: 5-Inch
Do NOT use to pry or chisel
Screwdrivers have positive gripping action that holds, starts and drives slotted screws in awkward, hard-to-reach places
Split-blade screw-holding screwdriver wedges into screw slot
Includes 3/16-Inch, 1/4-Inch and 5/16-Inch (5 mm, 6 mm and 8 mm) tips
Resealable, seal-tight vinyl pouch with hanging grommet
Made in USA
Not designed for torquing or tightening>
Nut Driver with powerful nut-holding magnet built into shank
Smooth Comfordome handles fit the palm of the hand comfortably and are color-coded for easy identification
Hollow shafts facilitate work on stacked circuit boards or other long bolt applications
Chrome-plated shaft helps prevent corrosion
Made in USA
Internal flanges provide solid, twist-resistant shaft anchor
Meets or exceeds applicable ASME / ANSI specifications
Nut Driver reaches into deep recesses
Fits over long bolts and studs
Smooth Comfordome handles fit the palm of the hand comfortably and are color-coded for easy identification
Hollow shafts facilitate work on stacked circuit boards or other long bolt applications
Made in USA
Chrome-plated shaft helps prevent corrosion
Internal flanges provide solid, twist-resistant shaft anchor
Meets or exceeds applicable ASME / ANSI specifications
Designed for confined hard-to-reach applications.
Two tip sizes for added convenience.
Auto ranging voltage
Measures AC/DC Voltage - 600V (defaults to the AC voltage range)
Measures AC/DC Current- 10A
Measures capacitance, temperature and frequency
Capacitance 200µF
Temperature -4~1832ËšF
Frequency 1MHz
Resistance Range 40MΩ
Audible continuity with loud buzzer
Data hold and range hold
Diode test
soft touch buttons
Lead storage
µA setting
Back light display and 4000 count display
Protective boot
Low battery indicator and auto power off
CAT III 600V
Basic DC accuracy ±0.5%
Optional Accessories: Replacement Fuse Kit (Cat. No. 69194)
Screwdriver split-blade screw-holding driver wedges into screw slot
Positive gripping action holds, starts, and drives slotted screws in awkward, hard-to-reach places
Not designed for torquing or tightening
Made in USA for maximum strength and durability
Split-blade screw-holding driver wedges into screw slot.
Positive gripping action holds, starts, and drives slotted screws in awkward, hard-to-reach places.
Not designed for torquing or tightening.
Precision blade for use with small precision screws. Blade thickness of .028'' (1 mm) expanding to .045'' (1 mm).
Has pocket clip.
Recently Viewed
The Grey Pneumatic 1/4" Surface Drive x 3/16" Standard Socket (906RS) is a premium-grade impact socket designed to deliver exceptional performance and durability in demanding industrial applications. Its surface drive design minimizes wear on fastener corners, ensuring longer tool life and improved torque transfer. Crafted from high-quality chrome-molybdenum steel and heat-treated for optimal strength, this socket is built to withstand the rigors of heavy-duty use.
KEY FEATURES AND BENEFITS:
Surface Drive Design: Reduces fastener corner wear, enhancing tool longevity and torque transfer.
Chrome-Molybdenum Steel Construction: Provides exceptional strength and durability for demanding applications.
Heat Treatment: Ensures optimal hardness and toughness for reliable performance.
Precision Machining: Delivers precise fit and alignment for efficient operation.
Lifetime Warranty: Backed by a lifetime warranty for added peace of mind.
SPECIFICATIONS:
Drive Size: 1/4"
Socket Size: 3/16"
Material: Chrome-molybdenum steel
Finish: Black oxide
Length: 1-1/2"
3/4" -IDX7/8" -OD O-RINGS
3/32" -IDX9/32" -OD O-RING-CUS103 >
SLOTTED SHIM IS DESIGNED TO REDUCE PHYSICAL DISTURBANCES. THIS PRODUCT IS CONSTRUCTED FROM 300 SERIES STAINLESS STEEL. THE SLOTTED SHIM IS 3" WIDE AND 3" LONG. THE THICKNESS OF THIS ITEM IS 0.025 COMES IN SIZE B AND HAS A SLOT SIZE OF 7/8".
-PRC42345>
The Grey Pneumatic 5048DB (MPN: GRY-5048DB) is a specialized heavy-duty impact socket designed for servicing outer cap nuts on Budd-style truck wheels. It features a #5 Spline drive and a 1-1/2" hex limited-depth opening to prevent accidental contact and damage to the wheel or inner cap nut.
