Jason Industrial

A MULTIPLE CLASSICAL BANDED V-BELT. B SERIES, 13" OUTSIDE LENGTH, 3/8" BELT WIDTH; 1 BAND; POLYESTER TENSILE MATERIAL; RUBBER OUTER MATERIAL
-JAS130XL037 >

THE STANDARD TRAPEZOIDAL TOOTH TIMING BELT DESIGN PERFORMS POORLY IN HIGH TORQUE APPLICATIONS AND HIGH-POWER DRIVES AT LOWER SPEEDS. TO OVERCOME THIS DISADVANTAGE THE HIGH TORQUE BELT (HTB) WAS DEVELOPED USING A MORE EFFICIENT TOOTH PROFILE. OIL, HEAT AND ABRASION-RESISTANT
-JAS12808M50 >

FIBERGLASS TENSILE CORD-HIGH DIMENSIONAL STABILITY. CHLOROPRENE BELT BODY, OIL, HEAT AND OZONE RESISTANCE; HIGH TOOTH SHEAR RESISTANCE. NYLON TOOTH COVER
-JAS1260XH300 >

SYNTHETIC RUBBER TIMING BELT. COMFORMS TO RMA ENGINEERING STANDARD. TIMING BELTS ARE MEASURED BY LENGTH, TOOTH PITCH, THEN WIDTH. THE FIRST NUMBER IS THE LENGTH; THE LETTER AND SOMETIME NUMBER REFER TP THE TOOTH AND THE FINAL NUMBER IS THE WIDTH. STANDARD TIMING TOOTH PROFILE, H; FIBERGLASS TENSIILE MATERIAL; RUBBER OUTER MATERIAL
JAS1250H150 >

EXCEED USA RMA STANDARD IP-24 RATINGS LEVELS. TRAPEZOIDAL TOOTH, TROUBLE-FREE ALTERNATIVE TO CHAIN DRIVES.
JAS124L050 >

THE STANDARD TRAPEZOIDAL TOOTH TIMING BELT DESIGN PERFORMS POORLY IN HIGH TORQUE APPLICATIONS AND HIGH POWER DRIVES AT LOWER SPEEDS. TO OVERCOME THIS DISADVANTAGE THE HIGH TORQUE BELT (HTB) WAS DEVELOPED USING A MORE EFFICIENT TOOTH PROFILE. OIL, HEAT AND ABRASION-RESISTANT
-JAS11208M50 >

TIMING BELT, SYNCHRONOUS BELT, FIBERGLASS TENSILE CORD, OIL, HEAT AND OZONE RESISTANCE; HIGH TOOTH SHEAR RESISTANCE. NYLON TOOTH COVER-JAS12005M15>



- JAS12005M15>

HIGH TORQUE SYNCHRONOUS BELT, CHLOROPRENE, 1120 MM PITCH LENGTH, 8MM TOOTH PITCH, 30MM WIDE. OIL, HEAT AND OZONE RESISTANCE; HIGH TOOTH SHEAR RESiTANCE
JAS11208M36 >

HIGH TORQUE SYNCHRONOUS BELT, CHLOROPRENE, 1120 MM PITCH LENGTH, 8MM TOOTH PITCH, 30MM WIDE. OIL, HEAT AND OZONE RESISTANCE; HIGH TOOTH SHEAR RESTANCE
-JAS11208M30 >

1000H100 1/2" PITCH STANDARD TIMING BELT, MADE OF SYNTHETIC RUBBER
JAS1100H100 >

100X L100 STANDARD TIMING BELTS, CHLOROPREME, 10" LONG, 1" WIDE
-JAS100XL100 >

1/4"-ID X 50 FPT LENGTH AIR HOSE. 1/4" MPT NON-SWIVEL FITTING ON EACH END.
JAS1/4X50 >

1/4"-ID X 100 FPT LENGTH AIR HOSE. 1/4" MPT NON-SWIVEL FITTING ON EACH END. RED COLOR.
-JAS1/4X100>

1/4"-ID X 25 FPT LENGTH AIR HOSE. 1/4" MPT NON-SWIVEL FITTING ON EACH END.
-JAS1/4X25>

CONSISTENT DIMENSIONAL STABILITY, LOW PRE-TENSION, LOW NOISE, HIGH ABRASION RESISTANCE, LOW MAINTENANCE, HIGH FLEXIBILITY, LINEAR SPEEDS UP TO 80-M/SECOND.
- JAS16AT10/1500>

HIGH FLEXIBILITY RUNS ON SMALL DIAMETER PULLEYS, SPEED RATIOS UP TO 60:1, MULTIPLE RIB CONSTRUCTION-ELIMINATED TURNOVER, ONE BELT PER DRIVE, REDUCED NOISE AND VIBRATION. POLYESTER TENSILE CORD PROVIDES HIGHPOWER CAPACITY, LOW STRETCH.
-JAS490J6 >

POLYESTER TENSILE MATERIAL; RUBBER OUTER MATERIAL MULTI-RIB V-BELT
-JAS450J8 >

CONFORMS TO RMA ENGINEERING STANDARD, TIME BELTS ARE MEASURED BY LENGTH, TOOTH PITCH, THEN WIDTH. THE FIRST NUMBER IS THE LENGTH, THE LETTER AND SOMETIMES NUMBER REFER TO THE TOOTH AND THE FINAL NUMBER IS THE WIDTH.
-JAS4430V790 >

V-BELT, OIL AND HEAT RESISTANT, STATIC DISSIPATING, 127 " OUTSIDE LENGTH, 21/32 " BELT WIDTH, 1 BAND. POLYESTER TENSILE MATERIAL, RUBBER OUTER MATERIAL
-JAS3RB124 >

OIL & HEAT RESISTANT-DURABILITY IN TOUGH ENVIRONMENTS. FLEXIBLE IDEAL FOR USE WITH BACKSIDE IDLERS, STATIC DISSIPATING, MADE OF NATURAL RUBBER/SBR CORD OF POLYESTER AND COVERED WITH COTTON/POLYESTER BLEND
-JAS3L330 >

OIL & HEAT RESISTANT-DURABILITY IN TOUGH ENVIRONMENTS. FLEXIBLE IDEAL FOR USE WITH BACKSIDE IDLERS, STATIC DISSIPATING, MADE OF NATURAL RUBBER/SBR CORD OF POLYESTER AND COVERED WITH COTTON/POLYESTER BLEND
-JAS3L320 >

OIL & HEAT RESISTANT-DURABILITY IN TOUGH ENVIRONMENTS. FLEXIBLE IDEAL FOR USE WITH BACKSIDE IDLERS, STATIC DISSIPATING, MADE OF NATURAL RUBBER/SBR CORD OF POLYESTER AND COVERED WITH COTTON/POLYESTER BLEND
-JAS3L310 >

STANDARD TIMING TOOTH PROFILE; L; FIBERGLASS TENSILE MATERIAL; RUBBER OUTER MATERIAL.
-JAS345L050 >

OIL & HEAT RESISTANT-DURABILITY IN TOUGH ENVIRONMENTS. A MORE NARROW, DEEP WEDGE SHAPE WITH MORE EFFICIENT LOAD CARRYING CHARACTERISTICS AND HIGHER POWER CAPABILITY ALLOWS FOR SMALLER, MORE COMPACT DRIVES. THESE BELTS FEATURE THE UNIMATCH CONSTRUCTION. THIS ELIMINATED BELT SET MATCHING WITH ITS MULTIPLE STOCKING AND BELT WASTAGE PROBLEMS-JAS3VX900 >