Jason Industrial

OIL & HEAT RESISTANT-DURABILITY IN TOUGH ENVIRONMENTS. FLEXIBLE IDEAL FOR USE WITH BACKSIDE IDLERS, STATIC DISSIPATING, MADE OF NATURAL RUBBER/SBR CORD OF POLYESTER AND COVERED WITH COTTON/POLYESTER BLEND
-JAS3L360 >

OIL & HEAT RESISTANT-DURABILITY IN TOUGH ENVIRONMENTS. FLEXIBLE IDEAL FOR USE WITH BACKSIDE IDLERS, STATIC DISSIPATING, MADE OF NATURAL RUBBER/SBR CORD OF POLYESTER AND COVERED WITH COTTON/POLYESTER BLEND
-JAS3L350 >

OIL & HEAT RESISTANT-DURABILITY IN TOUGH ENVIRONMENTS. FLEXIBLE IDEAL FOR USE WITH BACKSIDE IDLERS, STATIC DISSIPATING, MADE OF NATURAL RUBBER/SBR CORD OF POLYESTER AND COVERED WITH COTTON/POLYESTER BLEND
-JAS3L340 >

OIL & HEAT RESISTANT-DURABILITY IN TOUGH ENVIRONMENTS. FLEXIBLE IDEAL FOR USE WITH BACKSIDE IDLERS, STATIC DISSIPATING, MADE OF NATURAL RUBBER/SBR CORD OF POLYESTER AND COVERED WITH COTTON/POLYESTER BLEND
JAS3L380 >

OIL & HEAT RESISTANT-DURABILITY IN TOUGH ENVIRONMENTS. FLEXIBLE IDEAL FOR USE WITH BACKSIDE IDLERS, STATIC DISSIPATING, MADE OF NATURAL RUBBER/SBR CORD OF POLYESTER AND COVERED WITH COTTON/POLYESTER BLEND
-JAS3L260 >

OIL & HEAT RESISTANT-DURABILITY IN TOUGH ENVIRONMENTS. FLEXIBLE IDEAL FOR USE WITH BACKSIDE IDLERS, STATIC DISSIPATING, MADE OF NATURAL RUBBER/SBR CORD OF POLYESTER AND COVERED WITH COTTON/POLYESTER BLEND
-JAS3L220 >

OIL & HEAT RESISTANT-DURABILITY IN TOUGH ENVIRONMENTS. FLEXIBLE IDEAL FOR USE WITH BACKSIDE IDLERS, STATIC DISSIPATING, MADE OF NATURAL RUBBER/SBR CORD OF POLYESTER AND COVERED WITH COTTON/POLYESTER BLEND
-JAS3L210 >

OIL & HEAT RESISTANT-DURABILITY IN TOUGH ENVIRONMENTS. FLEXIBLE IDEAL FOR USE WITH BACKSIDE IDLERS, STATIC DISSIPATING, MADE OF NATURAL RUBBER/SBR CORD OF POLYESTER AND COVERED WITH COTTON/POLYESTER BLEND
-JAS3L200 >

OIL & HEAT RESISTANT-DURABILITY IN TOUGH ENVIRONMENTS. FLEXIBLE IDEAL FOR USE WITH BACKSIDE IDLERS, STATIC DISSIPATING, MADE OF NATURAL RUBBER/SBR CORD OF POLYESTER AND COVERED WITH COTTON/POLYESTER BLEND
-JAS3L190 >

OIL & HEAT RESISTANT-DURABILITY IN TOUGH ENVIRONMENTS. FLEXIBLE IDEAL FOR USE WITH BACKSIDE IDLERS, STATIC DISSIPATING, MADE OF NATURAL RUBBER/SBR CORD OF POLYESTER AND COVERED WITH COTTON/POLYESTER BLEND
JAS3L170 >

OIL & HEAT RESISTANT-DURABILITY IN TOUGH ENVIRONMENTS. FLEXIBLE IDEAL FOR USE WITH BACKSIDE IDLERS, STATIC DISSIPATING, MADE OF NATURAL RUBBER/SBR CORD OF POLYESTER AND COVERED WITH COTTON/POLYESTER BLEND
AS3L270 >

SYNTHETIC RUBBER TIMING BELT. CONFORMS TO RMA ENGINEERING STANDARD. TIMING BELTS ARE MEASURED BY LENGTH, TOOTH PITCH, THEN WIDTH. THE FIRST NUMBER IS THE LENGTH; THE LETTER AND SOMETIME NUMBER REFER TO THE TOOTH AND THE FINAL NUMBER IS THE WIDTH. STANDARD TIMING TOOTH PROFILE, H; FIBERGLASS TENSIILE MATERIAL; RUBBER OUTER MATERIAL
JAS390L100 >

SYNTHETIC RUBBER TIMING BELT. COMFORMS TO RMA ENGINEERING STANDARD. TIMING BELTS ARE MEASURED BY LENGTH, TOOTH PITCH, THEN WIDTH. THE FIRST NUMBER IS THE LENGTH, THE LETTER AND SOMETIME NUMBER REFER TO THE TOOTH AND THE FINAL NUMBER IS THE WIDTH. STANDARD TIMING TOOTH PROFILE, H; FIBERGLASS TENSIILE MATERIAL; RUBBER OUTER MATERIAL
-JAS390L050 >

HIGH FLEXIBILITY RUNS ON SMALL DIAMETER PULLEYS, SPEED RATIOS UP TO 60:1, MULTIPLE RIB CONSTRUCTION-ELIMINATED TURNOVER, ONE BELT PER DRIVE, REDUCED NOISE AND VIBRATION. POLYESTER TENSILE CORD PROVIDES HIGHPOWER CAPACITY, LOW STRETCH.
-JAS390J6 >

SYNTHETIC RUBBER TIMING BELT. CONFORMS TO RMA ENGINEERING STANDARD. TIMING BELTS ARE MEASURED BY LENGTH, TOOTH PITCH, THEN WIDTH. THE FIRST NUMBER IS THE LENGTH; THE LETTER AND SOMETIME NUMBER REFER TO THE TOOTH AND THE FINAL NUMBER IS THE WIDTH. STANDARD TIMING TOOTH PROFILE, H; FIBERGLASS TENSIILE MATERIAL; RUBBER OUTER MATERIAL
JAS390H150 >

SYNTHETIC RUBBER TIMING BELT. CONFORMS TO RMA ENGINEERING STANDARD. TIMING BELTS ARE MEASURED BY LENGTH, TOOTH PITCH, THEN WIDTH. THE FIRST NUMBER IS THE LENGTH; THE LETTER AND SOMETIME NUMBER REFER TO THE TOOTH AND THE FINAL NUMBER IS THE WIDTH. STANDARD TIMING TOOTH PROFILE, H; FIBERGLASS TENSIILE MATERIAL; RUBBER OUTER MATERIAL
-JAS390H100 >

ABRASION-RESISTANT POLYURETHANE BODY OFFERS CLEAN RUNNING SYSTEMS WITHOUT ACCUMULATION OF DEBRIS. SYNCHRO-POWER ENDLESS BELTS AND SLEEVES FOR POWER TRANSMISSION ARE MANUFACTURED AS TRULY ENDLESS SYNCHRONOUS BELTS WITH NO JOINT. EXCEPTIONAL RIGIDITY, REDUCED TOOTH FLEXING AND EXCEPTIONAL STABILITY IN THE OVERALL SYSTEM WITH NO LUBRICATION REQUIRED-JAS390H150U>

FIBERGLASS TENSILE CORD-HIGH DIMENSIONAL STABILITY AND MAXIMUM FLEXIBILITY. OIL, HEAT AND OZONE RESISTANCE; HIGH TOOTH SHEAR RESISTANCE. NYLON TOOTH COVER, MADE OF POLYURETHANE
- JAS385014M120>

THE STANDARD TRAPEZOIDAL TOOTH TIMING BELT DESIGN PERFORMS POORLY IN HIGH TORQUE APPLICATIONS AND HIGH-POWER DRIVES AT LOWER SPEEDS. TO OVERCOME THIS DISADVANTAGE THE HIGH TORQUE BELT (HTB) WAS DEVELOPED USING A MORE EFFICIENT TOOTH PROFILE. OIL, HEAT AND ABRASION-RESISTANT
-JAS3843M15 >

BELT IS 384MM PITCH LENGTH, 128 TEETH, PITCH:3MM WIDTH;09, TOTAL HEIGHT 240MM, TOOTH HEIGHT:1.22 MM
-JAS3843M09 >

HIGH FLEXIBILITY RUNS ON SMALL DIAMETER PULLEYS, SPEED RATIOS UP TO 60:1, MULTIPLE RIB CONSTRUCTION-ELIMINATED TURNOVER, ONE BELT PER DRIVE, REDUCED NOISE AND VIBRATION. POLYESTER TENSILE CORD PROVIDES HIGHPOWER CAPACITY, LOW STRETCH.
-JAS380J6 >

A HARD WEATING, FLEXIBLE TOP SURFACE PROTECT TENSION CABLES. TENSION CABLES MADE IN CONTINUOUS HELICALLY GLASS FIBER. PROTECTIVE COVER FABRIC WITH A LOW COEFFICIENT OF FRICTION, IN ORDER TO ACHIEVE MINIMUM WEAT ON THE CONTACT SURFACES AND MINIMIZE NOISE. GOOD RESISTANCE TO OILS AND GREASES.
-JAS3755M15 >

SYNTHETIC RUBBER TIMING BELT. COMFORMS TO RMA ENGINEERING STANDARD. TIMING BELTS ARE MEASURED BY LENGTH, TOOTH PITCH, THEN WIDTH. THE FIRST NUMBER IS THE LENGTH; THE LETTER AND SOMETIME NUMBER REFER TO THE TOOTH AND THE FINAL NUMBER IS THE WIDTH. STANDARD TIMING TOOTH PROFILE, H; FIBERGLASS TENSIILE MATERIAL; RUBBER OUTER MATERIAL
-JAS367L050 >

SYNTHETIC RUBBER TIMING BELT. COMFORMS TO RMA ENGINEERING STANDARD. TIMING BELTS ARE MEASURED BY LENGTH, TOOTH PITCH, THEN WIDTH. THE FIRST NUMBER IS THE LENGTH; THE LETTER AND SOMETIME NUMBER REFER TO THE TOOTH AND THE FINAL NUMBER IS THE WIDTH. STANDARD TIMING TOOTH PROFILE, H; FIBERGLASS TENSIILE MATERIAL; RUBBER OUTER MATERIAL
-JAS360H200 >