HCI PREFERRED SUPPLIER
5206-2-Z Double Row Shielded Ball Bearing
DOUBLE ROW SHIELDED BALL BEARING-GUL52062Z >
5206-A-2-RS Double Row Sealed Ball Bearing
DOUBLE ROW SEALED BALL BEARING-GUL5206A2RS >
5206-E Double Row Maxload Ball Bearing
DOUBLE ROW MAXLOAD BALL BEARING-GUL5206E >
5206-E Double Row Open Face Bearing
Dimensions: 30 mm (bore) x 62 mm (outer diameter) x 24 mm (width)Type: Double row angular contact ball bearing Load Support: Accommodates both radial and axial loads in both directions Design Feature: "E" indicates an optimized internal design with more or larger balls for increased load carrying capacity.
5206-KPP-3 3600 Kinze Planter Hub Bearing
3600 KINZE PLANTER HUB BEARING-GUL5206KPP3 >
5206-ZZ Double Row Shielded Ball Bearing
DOUBLE ROW SHIELDED BALL BEARINGS-SNR5206ZZ>
5207-2-RS Double Row Sealed Ball Bearing
DOUBLE ROW SEALED BALL BEARING-GUL52072RS >
5207-2-Z Double Row Shielded Ball Bearing
DOUBLE ROW SHIELDED BALL BEARING-GUL52072Z >
5207-Mdouble-row, maximum-capacity angular contact ball bearing with an asymmetrical filling slot designed to optimize radial load capacity.
Double Row Cylindrical Bore Angular Contact Ball Bearing
Item #101168965
Unmounted, Angular Contact Bearing
1.38 in Inner Diameter
2.83 in Outer Diameter
1.06 in Width
Bearing Steel Material
5207-NRH Double Row Open Face Bearing
Bore Diameter (Inner d): 30 mm Outside Diameter (Outer D): 62 mm Width (B): 24 mm Basic Dynamic Load Rating: 30.3 kN Basic Static Load Rating: 28 kN
5208-2-RS Double Row Sealed Ball Bearing
DOUBLE ROW SEALED BALL BEARING - GUL52082RS >
5208-2-RS-NR Double Row Sealed Ball Bearing With Snap Ring
DOUBLE ROW SEALED BALL BEARING WITH SNAP RING-GUL52082RSNR >
5208-2-Z Double Row Shielded Ball Bearing
DOUBLE ROW SHIELDED BALL BEARING-GUL52082Z >
5208-A-ZZ-NR Double Row Shielded Ball Bearing
DOUBLE ROW SHIELDED BALL BEARING-GUL5208AZZNR >
5208-Mdouble-row, maximum-capacity angular contact ball bearing
Double Row Cylindrical Bore Angular Contact Ball Bearing
Item #100760658
Unmounted, Angular Contact Bearing
1.57 in Inner Diameter
3.15 in Outer Diameter
1.19 in Width
Bearing Steel Material
5209-2-RS Double Row Sealed Bearing
DOUBLE ROW SEALED BALL BEARING-GUL52092RS >
5209-2-Z Double Row Shielded Bearing
DOUBLE ROW SHIELDED BALL BEARING-GUL52092Z >
5209-M-FF-G Double Row Ball Bearings • Bore Diameter (Inner ID): 45 mm (1.7717 in) • Outside Diameter (Outer OD): 85 mm (3.3465 in) • Overall Width: 30.16 mm (1.1875 in) • Contact Angle: 30°
DOUBLE ROW BALL BEARINGS WSR-MRC5209MFFG>
5210 Double Row Open Face Ball Bearing
DOUBLE ROW OPEN FACE BALL BEARING-GUL5210 >
Recently Viewed
MORSE® 15570 1439 Drill Blank, 11/32 in Drill Blank, 4-3/4 in L, HSS
Proto® J9218 Nut Driver, 9/16 in, Solid Round Shank, Yellow Fluted Handle, ANSI B107.12, ASME B107.110-2012, Federal GGG-W-657C, Polished Chrome
GEARWRENCH® GearBox™ 85999 XL Series Extra Long Length Slim Double Box End Ratcheting Wrench Set, 13 Pieces, 5/16 to 1 in, Polished Chrome
GEARWRENCH 85999 13-piece XL Gear Box Double Box End metric ratcheting wrench set consists of 1 of each 5/16", 11/32", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16" 7/8", 15/16 and 1" XL gear box ratcheting wrenches. Ratcheting box end need as little as 5-Degrees to move the fastener as opposed to 30 degrees for standard box end wrenches. The standard box end combined with the long pattern length gives this wrench excellent torque capabilities to break a stubborn, rusted fastener. The ratcheting box end then makes the loosening or tightening of the fastener fast and safe. The box end features improved box end strength from GEARWRENCH's Off-Corner Loading and at the same time, reduces fastener rounding. The double box end ratcheting wrenches are made from the finest chrome vanadium steel for precision long lasting tool life.
MORSE® 32713 2046 Straight Flute Hand Tap Set, Right Hand Cutting, Bottoming/Plug/Taper Chamfer, H3 Thread Limit
MORSE® 15482 1439 Drill Blank, 1/16 in Drill Blank, 1-7/8 in L, HSS
GEARWRENCH® GearBox™ 85989 XL Series Extra Long Length Slim Double Box End Ratcheting Wrench Set, 17 Pieces, 8 to 25 mm, Polished Chrome
GEARWRENCH 85989 17-piece XL Gear Box Double Box End metric ratcheting wrench set consists of 1 of each 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 24 and 25mm XL GearBoxâ„¢ ratcheting wrenches. Ratcheting box end need as little as 5-degrees to move the fastener as opposed to 30 degrees for standard box end wrenches. The standard box end combined with the long pattern length gives this wrench excellent torque capabilities to break a stubborn, rusted fastener. The ratcheting box end then makes the loosening or tightening of the fastener fast and safe. The box end features improved box end strength from GEARWRENCH's off-corner loading and at the same time, reduces fastener rounding. The double box end ratcheting wrenches are made from the finest chrome vanadium steel for precision long lasting tool life.
