5208-2-RS-NR Double Row Sealed Ball Bearing With
DOUBLE ROW SEALED BALL BEARING WITH SNAP RING-GUL52082RSNR >
Recently Viewed
DOUBLE ROW SEALED BALL BEARING WITH SNAP RING-GUL52082RSNR >
Browning® offers an extensive multi groove sheave offering. This includes Browning® SPLIT TAPER® and QD® bushing designs. This means maximum economy and versatility for your application. Truly the right drive every time! Our exclusive B5V® sheaves have a patented design that offers 5 V hp in the economy of a B section sheave. B5V® sheaves serve 90% of all applications from 10 to 150 hp. This can reduce cost up to 40% over traditional designs.
2" 45-DEG COPPER SWEAT ELBOWS-ELK1062>
The Browning® torque limiter is a spring loaded friction style torque overload device. The load on the friction pads is adjusted so that the process torque is transmitted. An overload torque in excess of the set torque causes the unit to slip. This prevents overloads from transmitting through the system. When the load falls below the set level, the torque limiter stops slipping and transmits the torque. A torque limiter does not maintain phase between input and output. Although it is a similar size, the Browning® torque limiter has a higher torque density than the Morse® torque limiter. It is also well suited for applications that trip infrequently at high loads. It is most often used in a chain drive. A specially machined sprocket is inserted between the friction pads and acts as the slip interface. Torque capacity is up to 8800 in-lb.
1/2" STAINLESS STEEL 90 DEGREE WELD ELBOW-FIT1/2SSEWELD >
DOUBLE SEALED BALL BEARING WITH SNAP RING-GUL62052RSNR >
