HCI PREFERRED SUPPLIER
5200-SBK-F MRC BEARING Ball Bearing It belongs to the 5200-SB Light Series and is constructed using a Conrad (non-filling slot) layout. This design handles heavy radial forces alongside high, equal bi-directional thrust loads.
MRC 5200SBKF double row angular contact ball bearing with 10mm bore and 1.181" O.D. Single shielded enclosure and metal cage. Suitable for radial and axial load applications. Drop-in SKF replacement for industrial machinery.
5200-SBK-FF MRC BEARINGS Ball Bearing It belongs to the 5200-SB Light Series and is constructed using a Conrad (non-filling slot) layout. Featuring back-to-back contact angles that converge outside the unit, it delivers high operational rigidity and excel
Double Row Angular Contact Bearing - 10 mm Bore, 30 mm OD, 0.5625 in Width, Double Shielded, Without Snap Ring, 30 ° Contact Angle
5201-2-RS Double Row Sealed Ball Bearing
DOUBLE ROW SEALED BALL BEARING-GUL52012RS >
5201-2-Z Double Row Shielded Ball Bearing
DOUBLE ROW SHIELDED BALL BEARING-GUL52012Z >
5201-SBK-FF Double Row Ball Bearing It belongs to the 5200-SB Light Series and is designed with a Conrad (non-filling slot) construction. This configuration features a 30° contact angle across its two rows of balls, converging outside the assembly to sig
The MRC 5201SBKFF is a double-row angular contact ball bearing. Designed for high heavy-duty precision, it is widely utilized in mechanical power transmission and industrial motion control applications. Key Specifications Bore Diameter: 12 mm Outside Diameter (OD): 32 mm Width: 15.88 mm (0.625 inches) Contact Angle: 30 degrees
5202-A-2-Z Double Row Shielded Ball Bearing
DOUBLE ROW SHIELDED BALL BEARING-GUL5202A2Z >
5202-A-TN-9 Double Row Open Face Bearing
The SKF 5202ATN9 is a double-row angular contact ball bearing featuring a 15 mm bore, a 35 mm outer diameter, and a 15.9 mm width. It is designed with a non-metallic snap cage (TN9) and open configuration to support heavy radial and axial loads in both directions
5202-SBKF Double Row One Shield Ball Bearing belongs to the 5200-SB Light Series. Unlike the "M" series variants that utilize an aggressive filling notch for raw radial capacity, the Conrad-style non-filling slot layout of this bearing allows it to handl
• Bore Diameter (Inner ID): 15 mm
• Outside Diameter (Outer OD): 35 mm
• Overall Width: 15.875 mm (0.6250 in)
• Contact Angle: 30°
• Enclosure Style: Typically open or equipped with a single metal shield depending on exact sub-production batches
• Limiting Speed: 12,000 RPM (Grease) / 17,000 RPM (Oil)
• Dynamic Radial Load Capacity: 2,560 lbf (11,400 N)
• Static Radial Load Capacity: 1,530 lbf (6,800 N)
52025 #2 Welding Cable--roll Of 250'
#2 WELDING CABLE--ROLL OF 250' - FOR52025>
5203-2-RS Double Row Sealed Ball Bearing
DOUBLE ROW SEALED BALL BEARING-GUL52032RS >
5203-2-Z Double Row Shielded Ball Bearing
DOUBLE ROW SHIELDED BALL BEARING-GUL52032Z >
5203-AA/SY FILMOP SWEEPER DUST MOPS
72" V-SWEEPER DUST MOP-MAG5203AA/SY>
5203-ZZ Double Row Shielded Ball Bearing
DOUBLE ROW SHIELDED BALL BEARINGS-SNR5203ZZ>
5204 vintage double-row metric angular contact ball bearing
The New Departure 5204 is a double-row angular contact ball bearing. It is widely used in heavy-duty machinery, automotive applications, and industrial equipment to handle combined (radial and axial) loads.
5204-2-RS Double Row Sealed Ball Bearing
DOUBLE ROW SEALED BALL BEARING-GUL52042RS >
5204-A Double Row Open Face Bearing
Bore Diameter (Inner ID): 20 mm Outside Diameter (OD): 47 mm Width: 20.6 mm (13/16 inches) Contact Angle: 30 degrees Load Capabilities: Supports high radial forces and substantial axial forces in both directions.
5204-A-2-Z Double Row Shielded Ball Bearing
DOUBLE ROW SHIELDED BALL BEARING-GUL5204A2Z >
5205-2-RS Double Row Sealed Ball Bearing
DOUBLE ROW SEALED BALL BEARING-GUL52052RS >
5205-2-RS-NR Double Row Sealed Ball Bearing With Snap Ring
DOUBLE ROW SEALED BALL BEARING WITH SNAP RING-GUL52052RSNR >
5205-2-Z Double Row Shield Ball Bearing
DOUBLE ROW SHIELDED BALL BEARING-GUL52052Z >
5205-2-Z-NR Double Row Shielded Ball Bearing
DOUBLE ROW SHIELDED BALL BEARING-GUL52052ZNR >
Recently Viewed
MORSE® 43502 1897 Non-Center Cutting Regular Length Single End End Mill, 3/16 in Dia Cutter, 1/2 in Length of Cut, 4 Flutes, 3/8 in Dia Shank, 2-3/8 in OAL, Bright
Apex® EX-370 Tighter Tolerance Hex Extension, 3/8 in Hex x Square Drive, 1.625 in OAL
Apex® EX-370 Tighter Tolerance Hex Extension, 3/8 in Male Hex x Male Square Drive, 1.625 in OAL
This 20V MAX* XR in. 3-Speed Impact Driver is lightweight yet powerful with a brushless motor that delivers 1,825 in-lbs. of max torque to drive large diameter screws. The 3-speed switch allows for increased user control and precision for various applications to help maximize versatility on the jobsite. Maintain productivity in low-light spots with a 3-LED on-board work light that helps to illuminate dimly lit workspaces. This cordless impact driver comes Chip Ready (chip sold separately) to track the tool's location with the DEWALT TOOL CONNECT Site Manager App
Apex® M-488 Magnetic Bit Holder, 7/16 in Drive, Steel, 1/4 in Hex
The 2863 M18™ FUEL™ w/ONE-KEY™ high torque 1/2 in. impact wrench with friction ring provides the most powerful, most compact, and the most repeatable impact wrench in the industry! The POWERSTATE™ brushless motor delivers up to 1,000ft-lbs of fastening torque and 1400ft-lbs of nut-busting torque, providing users a cordless solution that will eliminate the need for corded impact wrenches. The industry’s most compact cordless high torque impact wrench at 8.39 in. in length, this tool allows for more access in tight spaces. REDLINK Plus™ intelligence prevents damage to the tool and battery due to overloading or overheating. REDLITHIUM™ batteries deliver more work per charge and more work over the life of the battery. Compatible with one-key, this is the industry’s first high torque impact wrench that wirelessly connects to a smart phone to customize, track and manage a tool’s performance and location. Unlimited tool customization allows you to connect to the tool and access predetermined set-ups for specific fasteners and materials, or have complete control over output speed and power for the specific application at hand. With ONE-KEY™, users now have a tool that delivers the most repeatable torque output in the industry. Users looking for a targeted torque range now have solution that will get users close to their targeted torque value, reducing the likelihood of significant under or over torque. Users will experience less rework, less damage, and increased productivity that will get users closer to their torque target and will finish with a calibrated torque device to reach their targeted torque value. The tool’s memory supports up to 4 custom profiles that can be easily accessed with the touch of a button on the tool. Once the profiles are saved to the tool, the connection to the smart phone is no longer necessary. Your custom profiles are also saved in the cloud so that they can be accessed at any time.
DeWALT® XRP™ DC825KA Cordless Impact Driver Kit, 1/4 in Hex Drive, 0 to 2700 bpm, 1330 in-lb Torque, 18 VAC, 5-3/4 in OAL
