5203-AA/SY FILMOP SWEEPER SYSTEMS
72" V-SWEEPER DUST MOP-MAG5203AA/SY>
Recently Viewed
5203-AA/SY FILMOP SWEEPER SYSTEMS
72" V-SWEEPER DUST MOP-MAG5203AA/SY>
WATTS® 0066100 100XL Self-Closing Temperature/Pressure Relief Valve, 3/4 in Nominal, MNPT x FNPT End Style, 150 psi Pressure, Brass Body
This 3/4 inch temperature and pressure relief valve is used to provide automatic temperature and pressure protection to hot water supply tanks and hot water heaters up to 105,000 BTU/hr. It features a brass body with NPT male inlet and NPT female outlet connections, unique thermostat with special thermo-bonded coating, and a test lever. This valve is ASME rated and CSA listed. Temperature relief is 210 degree F (99 degree C). Pressure relief is set at 150 psi.
Nice® 1607DSTNTG18 1600® Non-Fill Slot Precision Deep Groove Ball Bearing, 7/16 in Dia Bore, 0.9063 in OD, 1 Rows, 5/16 in W, 300 lb Load
Precision ground 1600® Series bearings are specially designed to provide a line of low cost yet high quality bearings for adaptation to a majority of precision bearing applications. They are made in easy to use inch dimensions and are recommended for medium loads and for maximum speeds in the range of 5000 rpm. The 1600® Series bearings are precision ground on all surfaces with exceptional care given to the ball grooves. Careful heat treatment provides a uniform and exact degree of hardness for maximum life. A ball retainer, or separator, is used to increase the range of allowable speeds by reducing ball-to-ball contact friction.
Browning® offers a comprehensive line of off the shelf gears, including spur, miter and bevel as well as change gears. These are available in 20 deg pressure angle from 20 to 4 diametral pitch and 14.5 deg pressure angle from 48 to 3 diametral pitch. They are all designed to increase output, reduce costs and avoid the need for custom specials.
MAK-A-KEY SK26-2 Type 2 Imperial Step Keystock, 1/2 in H x 1 in W Base, 3/8 in H x 3/4 in W Step, Carbon Steel
MAK-A-KEY SK26-2 Type 2 Imperial Step Keystock, 1/2 in H x 1 in W Base, 3/8 in H x 3/4 in W Step, Carbon Steel
Leviton® TBR15-W 1-Phase Duplex Tamper Resistant Straight Blade Receptacle, 125 V AC, 15 A, 2 Poles, 3 Wires, White
Plug into safety with Leviton® line of tamper resistant receptacles. As a long time manufacturer of tamper resistant devices, we are pleased to be at the forefront of this safety measure with an expanded product line that encompasses a wide range of TR devices in residential, commercial, industrial and hospital grades.
