HCI PREFERRED SUPPLIER
3/8" -IDX5/8" -OD TYGON TUBE (FT)-CPIR360324 >
7/16" -IDX5/8" -OD TYGON TUBE (FT)-CPIR360326 >
1/2"-ID X 3/4"-OD TYGON TUBE (FT)
1/2" INGERSOL REGULATORS-INGR37341600>
40-MM BEARING RUBBER GROMMET-MMCR4 >
DOUBLE SEALED MINI BALL BEARING-GULR42RS >
DOUBLE SEALED MINI BALL BEARING-GULR4A2RS >
DOUBLE SHIELDED MINI BALL BEARING-GULR4AZZ >
DOUBLE SEALED MINI BALL BEARINGS
DOUBLE SHIELDED MINI BALL BEARINGS
The MRC R4ZZ is an inch-series, single-row radial deep groove ball bearing manufactured by MRC (a brand under SKF). It is a small Conrad-type bearing designed for high-speed industrial automation and motion control applications that handle radial and moderate thrust loads. Key Specifications Bore Diameter (Inner): 0.2500 inches (1/4 in) Outside Diameter: 0.6250 inches (5/8 in) Width: 0.196 inches (approx. 5 mm) Enclosure Type: Double shielded/sealed ("ZZ" indicates two protective closures to keep grease in and dirt out) Load Capacities: Supports a 332 lbf dynamic load and a 139 lbf static load Precision Rating: ABEC-1 standard industrial precision
4-1/2" RUBBER MAGNETIC JAW CAPS-WILR4.5 >
JUMBO TWIN 9" TOILET TISSUE DISPENSER-WHYR4000TBK >
2" SPINDLES-REDR40484 >
47-MM BEARING RUBBER GROMMET-MMCR5 >
R-5 RIVET HINGED FASTENER - COVR518 >
R-5 RIVET HINGED FASTENER - COVR524 >
R-5 RIVET HINGED FASTENER - COVR530 >
R-5 RIVET HINGED FASTENER - COVR536 >
BELT LACING RIVET WASHERS--PACK OF 50 - COVR5RW >
10000-LB PINTLE HOOKS-REDR5T>
52-MM BEARING RUBBER GROMMET-MMCR6 >
DOUBLE OPEN FACE BALL BEARING-GULR6 >
DOUBLE SEALED BALL BEARING-GULR62RS >
Recently Viewed
AIR FILTER-PRIPAF4878 >
SINGLE GROOVE 4.5" X 4.25" A-BELT ALUMINUM SHEAVE WITH 3/4" - ID-BRWAZ45X3/4 >
Browning® 1224351 Minimum Plain Bore Type C1 Change Gear Without Hardened Teeth, 1-1/4 in Dia Bore
Browning® is one of the most comprehensive lines of off-the shelf gears in the industry, including spur, miter and bevel and change gears. These are available in 20 deg pressure angle from 20 to 4 dp and 14-1/2 deg pressure angle from 48 to 3 dp all designed to increase output, reduce costs and avoid specials.
Leviton® 84026 Standard Size Wall Plate, 2 Gangs, 4.56 in W x 4.5 in H, 430 Stainless Steel
This 1/4 IN OD, 12 inch heavy duty brass threaded stem is designed for use with float valve to control high capacity water flow in commercial, industrial and agricultural applications. It is made of heavy duty brass with 1/4-20 inch NPT threaded ends for valve and float.
Enerpac® RCH1003 Hollow Plunger Single Acting Spring Return Hydraulic Cylinder, 103.1 ton Advance Capacity, 6-1/2 in Bore, 3 in L Stroke, 10 in Retract, 4.97 in Dia Rod, 10000 psi Pressure
Enerpac® RCH1003 Hollow Plunger Single Acting Spring Return Hydraulic Cylinder, 103.1 ton Advance Capacity, 6-1/2 in Bore, 3 in L Stroke, 10 in Retract, 4.97 in Dia Rod, 10000 psi Pressure
