HCI PREFERRED SUPPLIER
DOUBLE SEALED BALL BEARING WITH SNAP RING-GULR62RSNR >
DOUBLE SHIELDED BALL BEARING-GULR62Z >
R-6 RIVET HINGED FASTENER - COVR648 >
62-MM BEARING RUBBER GROMMET-MMCR7 >
1/16" X 36" RED RUBBER (FT)-TEAR7502X36 >
1/8" X 36" RED RUBBER (FT)-TEAR7504X36 >
1/8" X 48" RED RUBBER GASKET (FT)-TEAR7504X48 >
1/4" RED RUBBER GASKET (FT)-TEAR7508X36 >
DOUBLE OPEN FACE BALL BEARING-GULR8 >
DOUBLE SEALED BALL BEARING-GULR82RS >
DOUBLE SHIELDED BALL BEARING
R-8-ZZ Double Shielded Ball Bearing • Bore Diameter (Inner): 7/16 in (11.112 mm) • Outside Diameter: 7/8 in (22.225 mm) • Width: 9/32 in (7.142 mm) • Closure Type: Double Metal Shields (ZZ / FF) • Lubrication: Pre-filled with high-speed refinery grease
The MRC SR8-ZZ (or R8-ZZ) is an extra-small, inch-series deep groove ball bearing. Featuring double metal shielding to keep dust out and retain grease, this stainless-steel bearing is typically used in miniature applications, medical instruments, and light industrial equipment. Dimensional Specifications Inner Diameter (ID): 0.5000 in (1/2") Outer Diameter (OD): 1.1250 in (1-1/8") Width: 0.3125 in (5/16")
R14-FF Double Shielded Deep Groove Ball Bearing
Cylindrical Bore Deep Groove Ball Bearing
Item #100755640
Deep Groove Bearing
0.88 in Inner Diameter
1.88 in Outer Diameter
0.5 in Width
Bearing Steel Material
DOUBLE SHIELDED MINI BALL BEARINGS
BEARING-GULRA100RR7 >
RAO--2-11/16 2-11/16"-ID 300 Pillow Block
2-11/16"-ID 300 PILLOW BLOCK UNIT-MBURAO211/16>
RAO-1-1/2 MOUNTED Pillow Block Unit
1-1/2"-ID 300 PILLOW BLOCK UNITS-MBURAO11/2>
1-15/16" -ID PILLOW BLOCK UNIT-MBURAO115/16 >
1-7/16" -ID PILLOW BLOCK UNIT-MBURAO17/16 >
RAO-2-15/16 2-15/16"-ID 300 Pillow Block
2-15/16"-ID 300 PILLOW BLOCK UNITS-MBURAO215/16>
2-3/16" -ID PILLOW BLOCK UNIT-MBURAO23/16 >
2-7/16" -ID PILLOW BLOCK UNIT-MBURAO27/16 >
3/4" X 112" PALLET RED RUBBER BAND-GRERB112D >
12" UNPAINTED RECEIVER TUBES-REDRB12UP >
Recently Viewed
Browning® offers a comprehensive line of off the shelf gears, including spur, miter and bevel as well as change gears. These are available in 20 deg pressure angle from 20 to 4 diametral pitch and 14.5 deg pressure angle from 48 to 3 diametral pitch. They are all designed to increase output, reduce costs and avoid the need for custom specials.
15/16" -ID JAW COUPLING HALF-LOVL100X15/16 >
60" WORK BENCH TAN STRINGERS (EA)
TAPERED ROLLER BEARING CUPS-BCAHM516410>
15-AMP 600-VOLT TD CLASS-J FUSES
DOUBLE OPEN FACE MINI BALL BEARINGS-FAFS1K7>
