Dodge Industrial

1/3-V-3.351610 Dodge® 112175 Single Groove Sheave, Taper-Lock® Bore, 1/2 to 1-11/16 in Dia Bore, 3.35 in OD, 3.3 in Dia Pitch, 1.06 in W Face

All Dodge® V-drive sheaves are manufactured to ISO 9002 quality standards with precision machining that meets or exceeds joint RMA/MPTA industry standards for smooth operation and extended belt life. This provides low economical costs per hp transmitted due to shock load and vibration isolation creating clean, quiet operation.

1060-T-10-CG Dodge® 006754 Horizontal Split Type T10 Grid and Cover Assembly, For Use With Grid-Lign® Coupling

Dodge® 006754 Horizontal Split Type T10 Grid and Cover Assembly, For Use With Grid-Lign® Coupling

1060-TX-1-7/8 Dodge® 6610 Type T10 Grid Coupling Hub, 1060T Coupling, 1-7/8 in Dia Bore, 2-1/2 in L Through Bore, 3 in Dia Hub, Steel

1060T TL (1615) HUB Dodge® Grid-Lign® 006321 Horizontal/Vertical Split Cover Taper-Lock® Bushed Grid Coupling Hub, 1060T Coupling, Steel

1060T TL (1615) HUB Dodge® Grid-Lign® 006321 Horizontal/Vertical Split Cover Taper-Lock® Bushed Grid Coupling Hub, 1060T Coupling, Steel

1080-T-20 Dodge® Grid-Lign® 006266 Cover Assembly, For Use With Grid-Lign® Size 1080T T20 4750 rpm Speed Vertical Split Coupling

Dodge® Grid-Lign® 006266 Cover Assembly, For Use With Grid-Lign® Size 1080T T20 4750 rpm Speed Vertical Split Coupling

1090-T-3-3/8 Dodge® 6802 Type T10/T20 Grid Coupling Hub, 1090T Coupling, 3-3/8 in Dia Bore, 3.9 in L Through Bore, 4.88 in Dia Hub, Steel

The basic Grid-Lign® coupling consists of two steel shaft hubs, a high strength spring steel tapered grid element, two seals and a cover assembly. Misalignment and end float are accommodated by the sliding action of the grid in the lubricated hub grooves.

10HTL-1310 Dodge® 015804 Tire Taper-Lock Bushed Raptor Coupling Hub, E10 Coupling, 1.44 in Dia Bore, 1.88 in L Through Bore, 3.3 in Dia Hub, Steel

10HTL-1310 Dodge® 015804 Tire Taper-Lock Bushed Raptor Coupling Hub, E10 Coupling, 1.44 in Dia Bore, 1.88 in L Through Bore, 3.3 in Dia Hub, Steel

1100T HUB X 3-7/8 Dodge® Grid-Lign® 006471 Finished Bore Horizontal/Vertical Split Cover Grid Coupling Hub, 1100T Coupling, Steel

1100T HUB X 3-7/8 Dodge® Grid-Lign® 006471 Finished Bore Horizontal/Vertical Split Cover Grid Coupling Hub, 1100T Coupling, Steel

1190-14M-55 Dodge® 146555 HT200 Single Sided High Torque Belt, 85 Teeth, 14 mm Pitch, 1190 mm OAL, 55 mm W, Chloroprene Rubber

Dodge® synchronous belt drives require no lubrication. They provide a positive engagement between a toothed belt and a toothed sprocket and are offered with curvilinear, modified curvilinear and trapezoidal tooth profiles.

12-C-120-J Dodge® 455935 Block Heavy Duty Type A Sheave, 1-1/2 to 4-1/2 in QD® Bore, 12.4 in OD, 12 Grooves, 12.4 in Dia Pitch, 12.37 in W Face

Dodge® branded sheaves come in two bushing styles, QD and Taper Lock®. In addition to these bushing choices, Dodge® now offers choices within our QD sheaves line. Our QD sheave line comes in a standard duty and a heavy duty offering.

14MX-67S-68-3525 Dodge® 482117 HT500 Type A2F High Torque Belt Sprocket, 1-3/16 to 3-15/16 in Taper-Lock® Bore, 11.645 in OD, 67 Grooves, 11.755 in Dia Pitch, 3.33 in W Face

The Dodge® high torque HT500 synchronous drive product line utilizes a modified curvilinear tooth profile to delivers high torque, low maintenance and high energy efficiency with less overhung load than V-belt drives. The HT500 product family features a complete offering of synchronous sprockets with shaft attachment options including taper-lock and QD bushings (fin fan), as well as minimum plain bore sprockets (MPB) and idler sprockets available from stock.

2-B-341210 Dodge® 118211 Type A1 Sheave, 1/2 to 1-1/4 in Taper-Lock® Bore, 3-3/4 in OD, 2 Grooves, 3.38/3.76 in Dia Pitch, 1-3/4 in W Face

Sheaves are manufactured in Dodge® plants under strict quality control assurances. Precision machining meets or exceeds joint extended belt life. Dodge® manufactures all sheaves in plants certified to ISO 9002 quality standards.

2-B-521610 Dodge® 118220 Type A1 Sheave, 1/2 to 1-11/16 in Taper-Lock® Bore, 5.55 in OD, 2 Grooves, 5.18/5.56 in Dia Pitch, 1-3/4 in W Face

Sheaves are manufactured in Dodge® plants under strict quality control assurances. Precision machining meets or exceeds joint extended belt life. Dodge® manufactures all sheaves in plants certified to ISO 9002 quality standards.

20-Q-25-L-56 Dodge® Tigear-2® 20Q25L56 Standard Right Angle Worm Gear Speed Reducer, Quill Input, Solid A Shaft Output, 1.11 hp, 25:1 Gear, 70 rpm Maximum Output, 788 in-lb Torque Rating

The speed reducer shall be a single reduction worm gear reducer incorporating three input configurations - a quill style for direct attachment of electric motors, a separate keyed input shaft suitable for flexible coupling to a footed motor or belt and pulley input configuration and a motor adapter style input that employs a three piece coupling to connect electric motors to the reducer. These input configurations shall be available in both solid and hollow output shaft designs. The reducer shall be manufactured in the United States of America.

20HSB 1-15/16 Dodge® 015551 Tire Finished Bore Raptor Coupling Hub, E20 Coupling, 1-15/16 in Dia Bore, 2.06 in L Through Bore, 4 in Dia Hub

20HSB 1-15/16 Dodge® 015551 Tire Finished Bore Raptor Coupling Hub, E20 Coupling, 1-15/16 in Dia Bore, 2.06 in L Through Bore, 4 in Dia Hub

20HTL-1610 Dodge® 015805 Tire Taper-Lock Bushed Raptor Coupling Hub, E20 Coupling, 1.69 in Dia Bore, 2.06 in L Through Bore, 4 in Dia Hub, Steel

20HTL-1610 Dodge® 015805 Tire Taper-Lock Bushed Raptor Coupling Hub, E20 Coupling, 1.69 in Dia Bore, 2.06 in L Through Bore, 4 in Dia Hub, Steel

22215-K Dodge® 422001 22215K Tapered Spherical Roller Bearing, 2-7/16 to 2-1/2 in Dia Bore, 5.1181 in OD, 1.2205 in W, 48000 lb Dynamic Load

Dodge® ISN spherical roller bearings-the only high-capacity double-row spherical roller bearings with an effective easy-on, easy-off adapter mounting and removal system. Not only does this patented system provide a concentric grip for superior holding on the shaft, it ensures that the bearing can be mounted and dismounted in less than fifteen minutes.

22228E1AK.M.C3.E42A Dodge® 422017 Tapered Spherical Roller Bearing, 4-15/16 to 5 in Dia Bore, 250 mm OD, 2.6772 in W, 196000 lb Dynamic Load

Dodge® ISN spherical roller bearings-the only high-capacity double-row spherical roller bearings with an effective easy-on, easy-off adapter mounting and removal system. Not only does this patented system provide a concentric grip for superior holding on the shaft, it ensures that the bearing can be mounted and dismounted in less than fifteen minutes.

22238-K-C3 Dodge® 422027 Tapered Spherical Roller Bearing, 6-15/16 to 7 in Dia Bore, 340 mm OD, 3.622 in W, 270000 lb Dynamic Load

Dodge® ISN spherical roller bearings-the only high-capacity double-row spherical roller bearings with an effective easy-on, easy-off adapter mounting and removal system. Not only does this patented system provide a concentric grip for superior holding on the shaft, it ensures that the bearing can be mounted and dismounted in less than fifteen minutes.

2517B Dodge® 120013 Keyseated Taper Locking Bushing Adapter, 4-1/8 in Dia, 1-3/4 in L, For Use With 2517 Bushing, Cast Iron

2517B Dodge® 120013 Keyseated Taper Locking Bushing Adapter, 4-1/8 in Dia, 1-3/4 in L, For Use With 2517 Bushing, Cast Iron

2HRB Dodge® 015234 Tire Rough Stock Bore Raptor Coupling Hub, E2 Coupling, 1.13 in Dia Bore, 0.94 in L Through Bore, 1.65 in Dia Hub, Steel

2HRB Dodge® 015234 Tire Rough Stock Bore Raptor Coupling Hub, E2 Coupling, 1.13 in Dia Bore, 0.94 in L Through Bore, 1.65 in Dia Hub, Steel

30HTL-2012 Dodge® 015806 Tire Taper-Lock Bushed Raptor Coupling Hub, E30 Coupling, 2.13 in Dia Bore, 2.31 in L Through Bore, 4.62 in Dia Hub, Steel

30HTL-2012 Dodge® 015806 Tire Taper-Lock Bushed Raptor Coupling Hub, E30 Coupling, 2.13 in Dia Bore, 2.31 in L Through Bore, 4.62 in Dia Hub, Steel

3136-14MX-37 Dodge® 142790 HT500 High Torque Belt, 14 mm Pitch, 3136 mm OAL, 37 mm W

3136-14MX-37 Dodge® 142790 HT500 High Torque Belt, 14 mm Pitch, 3136 mm OAL, 37 mm W

33-V-19.03020 Dodge® 112042 Type C3 Sheave, 7/8 to 3-1/4 in Taper-Lock® Bore, 19 in OD, 3 Grooves, 18.95 in Dia Pitch, 1-1/2 in W Face

Sheaves are manufactured in Dodge® plants under strict quality control assurances. Precision machining meets or exceeds joint extended belt life. Dodge® manufactures all sheaves in plants certified to ISO 9002 quality standards.