Dodge Industrial
W16 Dodge® 228011 Taper-Lock Type W/WA Weld-On Hub, 2-1/4 in Bore, 3-1/4 in OD, 2.13 in Bolt Circle Diameter, 1-1/2 in OAL, Steel
Weld-on hubs are made of 1015-1025 steel, drilled, tapped and taper bored to receive the taper-lock bushing. They are useful for welding into fan rotors, pulleys, plate sprockets, etc., which must be firmly mounted onto shafting. Four types of hubs are available from stock.
WA30 Dodge® 228087 Taper-Lock Type W/WA Weld-On Hub, 4-1/4 in Bore, 5-1/2 in OD, 4 in Bolt Circle Diameter, 3 in OAL, Steel
Weld-on hubs are made of 1015-1025 steel, drilled, tapped and taper bored to receive the taper-lock bushing. They are useful for welding into fan rotors, pulleys, plate sprockets, etc., which must be firmly mounted onto shafting. Four types of hubs are available from stock.
WS-400X18-TUFR Dodge® 038214 WS Ball Bearing Wide Slot Take-Up Frame, 18 in Travel, 25-3/4 in OAL, 8-13/16 in W Base, 11-3/4 in L Bolt Center-to-Center, 7-5/16 in W Bolt Center-to-Center
WS-400X18-TUFR Dodge® 038214 WS Ball Bearing Wide Slot Take-Up Frame, 18 in Travel, 25-3/4 in OAL, 8-13/16 in W Base, 11-3/4 in L Bolt Center-to-Center, 7-5/16 in W Bolt Center-to-Center
WS-502X18-TUFR Dodge® 038219 WS Ball Bearing Wide Slot Take-Up Frame, 18 in Travel, 26-3/4 in OAL, 10-7/16 in W Base, 12-1/4 in L Bolt Center-to-Center, 8-5/8 in W Bolt Center-to-Center
WS-502X18-TUFR Dodge® 038219 WS Ball Bearing Wide Slot Take-Up Frame, 18 in Travel, 26-3/4 in OAL, 10-7/16 in W Base, 12-1/4 in L Bolt Center-to-Center, 8-5/8 in W Bolt Center-to-Center
WS-515X12-TUFR Dodge® 038222 WS Ball Bearing Wide Slot Take-Up Frame, 12 in Travel, 23-7/8 in OAL, 12 in W Base, 10-1/4 in L Bolt Center-to-Center, 10-1/4 in W Bolt Center-to-Center
WS-515X12-TUFR Dodge® 038222 WS Ball Bearing Wide Slot Take-Up Frame, 12 in Travel, 23-7/8 in OAL, 12 in W Base, 10-1/4 in L Bolt Center-to-Center, 10-1/4 in W Bolt Center-to-Center
WS-515X24-TUFR Dodge® 038224 WS Ball Bearing Wide Slot Take-Up Frame, 24 in Travel, 35-7/8 in OAL, 12 in W Base, 16-1/4 in L Bolt Center-to-Center, 10-1/4 in W Bolt Center-to-Center
WS-515X24-TUFR Dodge® 038224 WS Ball Bearing Wide Slot Take-Up Frame, 24 in Travel, 35-7/8 in OAL, 12 in W Base, 16-1/4 in L Bolt Center-to-Center, 10-1/4 in W Bolt Center-to-Center
WS-608X24-TUFR Dodge® 038228 WS Ball Bearing Wide Slot Take-Up Frame, 24 in Travel, 35-7/8 in OAL, 12-9/16 in W Base, 16-1/4 in L Bolt Center-to-Center, 10-13/16 in W Bolt Center-to-Center
WS-608X24-TUFR Dodge® 038228 WS Ball Bearing Wide Slot Take-Up Frame, 24 in Travel, 35-7/8 in OAL, 12-9/16 in W Base, 16-1/4 in L Bolt Center-to-Center, 10-13/16 in W Bolt Center-to-Center
Recently Viewed
4-GRV BANDED B-144 V-BELT-GAT4/B144 >
BPR-6-18 a normal-duty, light-weight pillow block ball bearing assembly configured for a 1-1/8 inch shaft.
• Shaft Diameter (Bore ID): 1-1/8 inches (1.1250")
• Housing Base Configuration: 2-Bolt Pillow Block
• Housing Material: High-tensile Pressed Steel with a Rubber Cushion Ring
• Locking Mechanism: Dual 120° Set-Screw Locking Collar
• Bearing Insert Material: High-carbon AISI 52100 Chrome Steel
• Radial Dynamic Load Capacity: 4,410 lbf
• Radial Static Load Capacity: 2,540 lbf
• Lubrication Status: Factory pre-greased and sealed for life (Non-Relubricatable)
• Sealing Profile: Standard full-contact rubber lip seals
• Total Weight: ~1.23 lbs
26 TOOTH TAPER-LOCK SPROCKETS FOR #60 CHAIN-IDC60BTL26 >
IKO manufactures a wide range of radial Needle Roller Bearings to meet the needs of different applications and machine profiles. These include shell type bearings, needle roller cages for both general use and within engine connecting rods and machined type Needle Roller Bearings. Shell type Needle Roller Bearings are lightweight, low profile motion components designed to handle either high speeds or heavy loads, depending on the configuration. An outer ring made of high strength steel enables a streamlined profile with the lowest sectional height of all the Needle Roller Bearings.
Browning® offers a comprehensive line of off the shelf gears, including spur, miter and bevel as well as change gears. These are available in 20 deg pressure angle from 20 to 4 diametral pitch and 14.5 deg pressure angle from 48 to 3 diametral pitch. They are all designed to increase output, reduce costs and avoid the need for custom specials.
