Crosby Group
CROSBY 1-02025 404 Light Champion Tail Board Snatch Block, Wire Rope Cable, 3/8 to 1/2 in, 4 ton Load, 4-1/2 in OD
Model Number: Type 404 Tailboard Block Working Load Limit: 4 Tons (8,000 lbs / 8,800 lbs depending on system configuration) Sheave Diameter: 4-1/2 inches Wire Rope Size Compatibility: 3/8" to 1/2"Bearing Type: Self-lubricating bronze bushing Product Weight: 7 lbs
CROSBY 666247 HS-262B Standard Steel Block With Loose Side Latch Hook, Manila Rope Cable, 5/8 in, 1800 lb Load, 3 in OD
HS-262B Standard Steel Block With Loose Side Latch Hook, Manila Rope Cable, 5/8 in, 1800 lb Load, 3 in OD
CROSBY 01-08127 Light Champion 418 Double Sheave Snatch Block With Hook, Wire Rope Cable, 5/8 to 3/4 in, 8 ton Load, 6 in OD
This 6" sheave Crosby® McKissick snatch block has a forged alloy heat treated hook and works with 5/8"-3/4" wire rope. Hook assemblies on 4-1/2"-14" sizes can be interchanged. The 418 type snatch block is furnished with bronze bushings and meets or exceeds all requirements of ASME B30.26.
CROSBY 01-09064 419 Light Champion Snatch Block With Shackle, Wire Rope Cable, 3/8 to 1/2 in, 4 ton Load, 4-1/2 in OD
Working Load Limit (WLL): 4 Tons (8,800 lbs) with a 4:1 design safety factor. Sheave Diameter: 4-1/2 inches (Single sheave). Wire Rope Compatibility: Designed for wire rope diameters ranging from 3/8" to 1/2". Bearing Type: Self-lubricating bronze bushing with integrated pressure lubrication fittings for easy maintenance. Material & Finish: Painted alloy steel construction featuring a forged steel swivel shackle. Total Product Weight: 12 lbs.
CROSBY 01-09359 419 Light Champion Snatch Block With Shackle, Wire Rope Cable, 5/8 to 3/4 in, 8 ton Load, 10 in OD
Working Load Limit: 8 metric tons (17,600 lbs). Sheave Diameter: 10 inches with a single sheave count. Wire Rope Capacity: Designed for 5/8" to 3/4" wire rope diameters. Safety Design Factor: Built with a 4:1 safety factor. Product Weight: Approximately 42 to 43 lbs. Bearing Type: Heavy-duty roller bearings.
CROSBY 07-10225 T-350-R Gin Block With Swivel Latch Hook, Manila Rope Cable, 1 in, 1000 lb Load, 10 in OD
T-350-R Gin Block With Swivel Latch Hook, Manila Rope Cable, 1 in, 1000 lb Load, 10 in OD
CROSBY 07-10243 T-350-R Gin Block With Swivel Latch Hook, Manila Rope Cable, 1 in, 1000 lb Load, 12 in OD
T-350-R Gin Block With Swivel Latch Hook, Manila Rope Cable, 1 in, 1000 lb Load, 12 in OD
5/8″ Rope, 6″ OD SAE 841 Bearing, 0.75 Shaft Size, 1.0625″ Hub width Forged Steel
CROSBY 1-21022 431 Super Champion Snatch Block With Shackle, 1 to 1-1/8 in, 20 ton Load, 8 in OD
431 Super Champion Snatch Block With Shackle, 1 to 1-1/8 in, 20 ton Load, 8 in OD
CROSBY 10-35045 Terminatorâ„¢ Wedge Socket With Wedge Nad Pin, 1 in, Steel, Painted, For Use With All Wire Rope
Wire Rope Size: 1 inch (25.4 mm). Model Series: S-421T Terminatorâ„¢ .Pin Diameter: 2.00 inches. Component Weight: Approximately 30.75 to 35.5 lbs. Material & Finish: Cast steel construction, typically painted or galvanized.
CROSBY 170629 HF-2 Hay Fork Pulley Block With Swivel Eye, Manila Rope Cable, 1-1/4 in, 1 ton Load, 4-1/2 in OD
HF-2 Hay Fork Pulley Block With Swivel Eye, Manila Rope Cable, 1-1/4 in, 1 ton Load, 4-1/2 in OD
CROSBY 665444 HW-261B Standard Steel Block With Swivel Hook, Wire Rope Cable, 3/8 in, 1200 lb Load, 3/8 in ID x 3/4 in OD
Western® 665444 HW-261B Standard Steel Block With Swivel Hook, Wire Rope Cable, 3/8 in, 1200 lb Load, 3/8 in ID x 3/4 in OD
905462 Common Bore Sheave, 3/8 in, 3/4 in ID x 1-7/8 in OD
Nominal Outside Diameter: 6 inches (152 mm) Wire Rope / Wireline Diameter: 3/8 inch (10 mm) Bore Size (Shaft Diameter): 3/4 inch (19.1 mm) Hub Width: 1-1/16 inches (27 mm) Material: Powdered Metal (P.M.) Weight: 1.13 lbs (0.51 kg)
Dimensions: 6" Outside Diameter (OD) x 3/4" Hub Width x 3/4" Bore Size (6 × 3/4 × 3/4). Wire Rope Size Compatibility: 3/8" wireline / wire rope. Bushing Material: Equipped with S.A.E. 660 Bronze Bushings featuring a "Figure 8" oil groove to optimize shaft lubrication. Weight: Approximately 2.5 lbs.
CROSBY A-1 L-150 Standard Lever Load Binder, 9200 lb Load, 3/8 in, 1/2 in, 4-1/2 in
In industrial rigging and cargo control, the Crosby® A-1 Lebus® L-150 Standard Load Binder is a highly recognized tool. Function: A traditional lever-type tensioning device used to tighten transport chains over flatbed cargo. Compatibility: Typically rated for 3/8-inch to 1/2-inch transport chains. Manufacturer: Produced under the Lebus brand by Kito Crosby.
CROSBY C-1 L-150 Standard Lever Load Binder With Hook, 13000 lb Load, 1/2 in, 5/8 in, 4-3/4 in
If you are securing transport chain for flatbed trucking or heavy hauling, this refers to the Crosby Lebus L-150 Standard Lever Type Load Binder (often cataloged or stamped with a "C-1" designation).Chain Compatibility: Designed for 1/2-inch to 5/8-inch transport chains. Capacity: Features a Working Load Limit (WLL) of 13,000 lbs. Build: Forged steel construction with a quenched and tempered handle that toggles away from the load for easy release.
CROSBY CR-071 L-150 Standard Lever Load Binder, 10800 lb Load, 5/16 in, 3/8 in, 4-1/2 in
L-150 Standard Lever Load Binder, 10800 lb Load, 5/16 in, 3/8 in, 4-1/2 in
CROSBY L-140-R-7 L-140 Standard Ratchet Load Binder, 4 ton Load, 8 mm, 10 mm Chain/Rope, 203 mm Take Up, Ratchet Handle, G70, G80, G100
Lebus® 1048404 L-140 Standard Ratchet Load Binder, 4 ton Load, 8 mm, 10 mm Chain/Rope, 203 mm Take Up, 1-Piece/Forged Handle, G70, G80, G100
Standard Ratchet Load Binder, 7.26 Ton Load, 13 mm, 16 mm Chain/Rope, 203 mm Take Up, 1-Piece/Forged Handle, G70, G80, G100
CROSBY L-140-R-C L-140-RA Standard Ratchet Load Binder, 6.8 ton Load, 10 mm, 13 mm Chain/Rope, 203 mm Take Up, Ratchet Handle, G70, G80, G100
L-140 Standard Ratchet Load Binder, 6.8 ton Load, 10 mm, 13 mm Chain/Rope, 203 mm Take Up, 1-Piece/Forged Handle, G70, G80, G100
CROSBY L-150-712, L-150 Snubbing Load Binder, 5400 lb Load, 5/16 in, 3/8 in, 4-1/4 in
L-150 Snubbing Load Binder, 5400 lb Load, 5/16 in, 3/8 in, 4-1/4 in
L-130 Midget Load Binder, 1450 lb Load, 3/16 to 1/4 in, 2.4 in
Crosby® 1 043294, G-291-15/16 X 4 1/4, Eye Bolt With Regular Nut, 5/16 in, 4-1/4 in L Shank, Forged Steel, Hot Dipped Galvanized
Crosby® 1043294 G-291 Eye Bolt With Regular Nut, 5/16 in, 4-1/4 in L Shank, Forged Steel, Hot Dipped Galvanized
Recently Viewed
64-MM-ID X 70-MM-OD BUNA-N O-RINGS-CUSH3X64>
The Grey Pneumatic 1/2" Drive x 5/8" Deep Universal Socket (2020UD) is a versatile and reliable tool for a variety of applications. Its universal design and deep well make it ideal for reaching recessed bolts and working with different fastener shapes and sizes.
KEY FEATURES AND BENEFITS:
Universal Design: Fits a wide range of fastener shapes and sizes.
Deep Well: Provides easy access to recessed bolts.
Impact Rated: Designed to withstand the high torque and impact forces generated by impact drivers.
Durable Construction: Made from high-quality materials for long-lasting performance.
Versatile Applications: Suitable for automotive, industrial, and home projects.
SPECIFICATIONS:
Drive: 1/2 inch
Socket Size: 5/8 inch
Depth: Deep
Type: Universal
Point: 6 point
Impact Rated: Yes
GP® 2124ET 9-Piece Socket, 1/2 in, E24 External Star Socket
9-1/2" -IDX10" -OD O-RINGS
GP® 3028D Deep Length Socket, 3/4 in, 7/8 in Hex Socket, 6 Points
