CRC® 03050 Extremely Flammable Synthetic Chain and Wire Rope Lubricant, 16 oz Aerosol Can, Liquid Form, Clear/Light Amber, 0.6771
CRC chain and wire rope lube is a special blend of synthetic lubricants, solvents and molybdenum designed to keep chains and wire rope in peak operating condition. With a low viscosity and wet film, chain & wire rope lube penetrates deeply between chain links and wire strands to reduce friction and wear that cause metal fatigue. Chain and wire rope lube also contains a tackifier that enables the lubricant to cling tenaciously to metal surfaces without increasing the viscosity. Regular use of chain & wire rope lube will help inhibit corrosion, reduce load stress and prevent wire strands from becoming brittle and fraying.
-
BrandCRC®
-
UPC078254030500
-
Manufacturer Part Number03050
-
CountryUSA
-
Temperature Range350 deg F
-
Flammability Rating3 HMIS/NFPA
-
Flash Point<0 deg F
-
FormLiquid
-
ColorClear/Light Amber
-
TypeExtremely Flammable Synthetic
-
CompositionNaphtha (Petroleum), Hydro Treated Light, Liquefied Petroleum Gas, 2-Methylpentane, Acrylic Copolymer, n-Hexane, White Mineral Oil, 2, 2-Dimethylbutane
-
VOC Content623.6 g/L
-
Container Size16 oz
-
Container TypeAerosol Can
-
Net Weight10 oz
-
Base TypeMolybdenum Disulfide
-
Specific Gravity0.6771
-
Odor/ScentMild Solvent
- A special blend of synthetic lubricants, solvents and molybdenum designed to keep chains and wire rope in peak operating condition
- Chain and wire rope lube extends the working life of chains and wire rope
- Anti-wear additive that penetrates deep and leaves a tough film that lubricates and protects
- Specifically formulated blend of synthetic lubricants and an organic molybdenum
- Contains anti-wear additives
- Operates effectively in temperatures up to 350 deg F continuous, equivalent to many grease products
- Dispenses a narrow, forceful stream of product to help penetrate surface cracks
- Helps reach overhead applications
- Offers effective performance while complying with the EPA regulations on the use of ozone depleting chemicals
| Competitor Name | Cross-Reference Number |
|---|---|
| Grainger | 2F139 |
| MSC | 05092044 |
| Fastenal | 63280 |
-
Alternative Part Number1003306
-
UNSPSC15121520
-
IDEA Index ID8423475
-
Package DescriptionEACH
-
Standards/ApprovalsARRA Compliant|Buy American Act Compliant|NSF H2 Registered|RoHS Compliant|PROP65: Cancer and reproductive harm - www.P65Warnings.ca.gov for more information
-
Specification Sheet
Recently Viewed
CRC® 03050 Extremely Flammable Synthetic Chain and Wire Rope Lubricant, 16 oz Aerosol Can, Liquid Form, Clear/Light Amber, 0.6771
CRC chain and wire rope lube is a special blend of synthetic lubricants, solvents and molybdenum designed to keep chains and wire rope in peak operating condition. With a low viscosity and wet film, chain & wire rope lube penetrates deeply between chain links and wire strands to reduce friction and wear that cause metal fatigue. Chain and wire rope lube also contains a tackifier that enables the lubricant to cling tenaciously to metal surfaces without increasing the viscosity. Regular use of chain & wire rope lube will help inhibit corrosion, reduce load stress and prevent wire strands from becoming brittle and fraying.
Drillco 735A108C 7350 Center Cutting Extra Long Length Imperial Single End Finishing End Mill, 1/8 in Dia Cutter, 1 in Length of Cut, 4 Flutes, 1/8 in Dia Shank, 3 in OAL, Uncoated
Solid carbide end mills run at extremely impressive feed and speed rates. In some cases, they can be run at 3x the rates of HSS end mills. Using solid carbide end mills results in better surface finish on the workpiece and extended tool life. Extra long
Drillco 73A124C 7300 Center Cutting Imperial Regular Length Single End Finishing End Mill, 3/8 in Dia Cutter, 1 in Length of Cut, 4 Flutes, 3/8 in Dia Shank, 2-1/2 in OAL, Uncoated
Solid carbide end mills run at extremely impressive feed and speed rates. In some cases, they can be run at 3x the rates of HSS end mills. Using solid carbide end mills results in better surface finish on the workpiece and extended tool life.
Drillco 73A120C 7300 Center Cutting Imperial Regular Length Single End Finishing End Mill, 5/16 in Dia Cutter, 13/16 in Length of Cut, 4 Flutes, 5/16 in Dia Shank, 2-1/2 in OAL, Uncoated
Solid carbide end mills run at extremely impressive feed and speed rates. In some cases, they can be run at 3x the rates of HSS end mills. Using solid carbide end mills results in better surface finish on the workpiece and extended tool life.
1/2-HP CAST IRON SUMP PUMPS-JWH448370>
