Thomson 3/8"-ID LINEAR BEARING THP SUPER-6
The Super Ball Bushing® bearing has been the industry standard for self-aligning linear bearings for over twenty years. This bearing provides three times the load capacity or 27 times the travel life of conventional linear bearings. Besides the dramatic increase in load capacity, the Super Ball Bushing® bearing is self-aligning, lightweight and adjustable with a low coefficient of friction. It is a quick and easy replacement for high friction plain bearings. The wear-resistant, engineered-polymer retainers and outer sleeves reduce inertia and noise in critical, high speed applications.
-
BrandThomson®
-
UPC662486826040
-
Manufacturer Part NumberSUPER6
-
CountryUSA
-
Load Capacity100 lb Dynamic
-
Temperature Rating185 deg F
-
Maximum Speed3 m/s
-
TypeAdjustable Closed
-
Shaft Diameter3/8 in
-
Bearing MaterialSteel
-
Outside Diameter5/8 in
-
Length7/8 in
- A coefficient of friction as low as 0.001 and allows the use of smaller, less expensive motors, belts, gears and ball screws when replacing high-friction, plain bearings
- A self-aligning capability up to 0.5 deg compensates for inaccuracies in base flatness or carriage machining
- Accelerations as high as 150 m/sq-s and steady state travel speeds up to 3 m/s without the derating factors commonly required with linear guides
- Double-lip integral wipers that keep out dirt while retaining lubrication and travel life is maximized
- Lightweight, wear-resistant, engineered polymer retainers and outer sleeves that reduce inertia and noise
- The Super Ball Bushing® bearing is self-aligning, lightweight and adjustable with a low coefficient of friction
- The wear-resistant, engineered-polymer retainers and outer sleeves reduce inertia and noise in critical, high speed applications
- Radially floating bearing plates when installed in an adjustable housing, the Super Ball Bushing® bearing may be adjusted to a specific diametrical fit-up for accurate and repeatable movement
- Self-aligning
-
UNSPSC31171506
-
Package Description1/PK
-
Catalog
Recently Viewed
The Super Ball Bushing® bearing has been the industry standard for self-aligning linear bearings for over twenty years. This bearing provides three times the load capacity or 27 times the travel life of conventional linear bearings. Besides the dramatic increase in load capacity, the Super Ball Bushing® bearing is self-aligning, lightweight and adjustable with a low coefficient of friction. It is a quick and easy replacement for high friction plain bearings. The wear-resistant, engineered-polymer retainers and outer sleeves reduce inertia and noise in critical, high speed applications.
Dichtomatik 75115253 O-Ring, 243 Dash Number, 4.109 in ID x 4.387 in OD, PTFE, 55 Durometer, Import, Custom 243-TEFLON
O-rings are endless, ring shaped sealing elements with a circular cross-section that are manufactured from elastomer materials or PTFE. The designation of an O-ring is derived from the dimensions of its inner diameter and cord width in millimeters, along with the name of the material and its Shore A hardness.
Irwin® Vise-Grip® The Original™ 4935576 10CR® Locking Plier, 1-7/8 in Nominal, Screw Locking, 3/4 in W x 2-1/4 in D Alloy Steel Curved Jaw, 10 in OAL
Irwin® Vise-Grip® The Original™ 4935576 10CR® Locking Plier, 1-7/8 in Nominal, Screw Locking, 3/4 in W x 2-1/4 in D Alloy Steel Curved Jaw, 10 in OAL
Dichtomatik 75102232 O-Ring, 334 Dash Number, 2.6 in ID x 3.02 in OD, FKM, 75 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
Proto® J290XL Locking Plier, 1-5/8 in, Locking Nut Locking, 1-9/32 in L x 23/64 in W Curved Alloy Steel Jaw, Serrated Jaw Surface, 7 in OAL
Precision Steel Ball Bushing® bearings offer great improvements in efficiency, productivity and accuracy over high-friction plain bearings flat-ways. The all-steel design makes the bearing product line perfect for replacing plain bearings in high temperature applications. Rigid construction makes them very durable compared to ball bushing bearings with polymer components. When installed in a standard Thomson® pillow block, the Precision Steel Ball Bushing® bearing can self-align up to 3 deg in all directions.
