DALDBH3508A
3-1/2" X 8" TIE-ROD HYD/CYLINDERS>
Recently Viewed
3-1/2" X 8" TIE-ROD HYD/CYLINDERS>
STRAIGHT LENGTH COPPER WATER PIPE. 99% PURE COPPER. I.D. MEASUREMENTS APPLY TO TYPE L WATER PIPE. TYPE L: HEAVY WALL FOR GENERAL PLUMBING AND HEATING PURPOSES.
-JWH484164 >
2-3/4" UNSEALED YOKE CAM FOLLOWERS-TORYCR44 >
Browning® 3546991 TGC Cam Detent Mini Straight Bushing Overload Clutch, 1/2 in Dia Bore, 3.15 in OD, 23 to 56 in-lb Torque, 2.36 in OAL
The Browning® Torq/Gard® overload clutches are one of the most popular torque overload devices that power transmission solutions offers. A spring loaded cam follower seated in a single hub cam detent cause the hub and clutch to rotate together. Therefore, the clutch always resets in the same position if tripped, staying in phase. They can be turned in both directions by design. After tripping, the unit automatically resets when it returns to the set position. This is usually performed by jogging the machine after the jam or overload is cleared. Shaft bushings are used to accommodate a standard maximum bore unit to the application shaft requirement. Torque capacity up to 8000 in-lb and speed ranges from 350 to 1800 rpm.
6" X 3" SCOTCHBRITE SCOURING PAD-JWH612065 >
ALAN 12-THHN GREEN STRANDED WIRE. THE THHN CONDUCTORS ARE PRIMARILY USED IN CONDUIT AS BRANCH CIRCUITS IN COMMERCIAL OR INDUSTRIAL APPLICATIONS.
TYPE THHN IS AVAILABLE STRANDED IN SIZES 14 AWG -750 KCMIT. THE CONDUCTORS ARE SOFT-ANNEALED, STRANDED OR SOLID COPPER AND ARE INSULATED WITH A TOUGH HEAT AND MOISTURE-RESISTANT POLYVINYL CHLORIDE, OVER WHICH A NYLON JACKSON IS APPLIED.
-ALE12THHNGRN >
