RIDGID® 29848 VT1781 Multi Purpose Car Nozzle, For Use With: 16 Gallon Two Stage Wet/Dry Vacuum, 1-7/8 in
RIDGID® 29848 VT1781 Multi Purpose Car Nozzle, For Use With: 16 Gallon Two Stage Wet/Dry Vacuum, 1-7/8 in
-
BrandRIDGID®
-
UPC095691298485
-
Manufacturer Part Number29848
-
CountryUSA
-
TypeMulti Purpose
-
Specifications1-7/8 in
-
Suitable For Use With16 Gallon Two Stage Wet/Dry Vacuum
-
Alternative Part NumberVT1781
-
UNSPSC99999999
-
Package DescriptionEACH
-
WarrantyFull Lifetime
-
Warranty Information
Recently Viewed
RIDGID® 29848 VT1781 Multi Purpose Car Nozzle, For Use With: 16 Gallon Two Stage Wet/Dry Vacuum, 1-7/8 in
RIDGID® 29848 VT1781 Multi Purpose Car Nozzle, For Use With: 16 Gallon Two Stage Wet/Dry Vacuum, 1-7/8 in
PIP® UB-21-1000 UB-1000 Lightweight Disposable Bouffant Cap, 21 in, White, Spunbond Polypropylene
PIP® UB-21-1000 UB-1000 Lightweight Disposable Bouffant Cap, 21 in, White, Spunbond Polypropylene
3/4" X 1/2" X 1/2" BLACK TEE-JPW3/4X1/2X1/2BT >
1/2" X 1/2" X 3/4" BLACK TEE-JPW1/2X1/2X3/4BT >
MasterDrive Q2-2.1/8 Q2 Series Double Split Tapered Bushing, 2.12 in Dia Bore, 2-7/8 in Dia Barrel, 4-1/8 in Dia Flange, 3-1/2 in OAL, Ductile Iron
Double Split Tapered Bushings are used on sheaves, sprockets and pulleys to provide increased clamping force over standard bore-to-size components. They are tapered in design with flanges and utilize cap screws to tighten on the shaft. The double split design assures better concentricity to the shaft and provides the highest degree of mechanical locking component to component. Most sizes are contructed of ductile iron to provide strength and duarability. Each Split Taper Bushing series is produced in a number of different bore size options, most that include a keyway, allowing users flexibility when using sheaves, sprockets or pulleys in applications that may utilize various shaft sizes.
Dichtomatik 75102163 O-Ring, 241 Dash Number, 3.859 in ID x 4.137 in OD, FKM, 75 Shore A Durometer, Import, Custom 241-VITON
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
