Banner Engineering Maxi-Beam® SM312LVAGQD Self-Contained Photoelectric Sensor, Rectangle Shape, 2 m, Red Laser Sensing Beam, 1 ms Response, NPN/PNP Output
Banner Engineering Maxi-Beam® SM312LVAGQD Self-Contained Photoelectric Sensor, Rectangle Shape, 2 m, Red Laser Sensing Beam, 1 ms Response, Bi-Polar Output
-
BrandBanner Engineering
-
UPC662488269135
-
Manufacturer Part NumberSM312LVAGQD
-
CountryUSA
-
Response Time1 ms
-
TypeSelf-Contained
-
Connection TypeQuick-Disconnect
-
Mounting TypeM18
-
Voltage Rating10/30 VDC
-
Amperage Rating25 mA
-
Sensing BeamRed Laser
-
Sensing MethodRetro Reflective
-
Sensing Range2 m
-
SeriesSM312
-
ShapeRectangle
-
Size73.3 mm L x 12.2 mm W x 33.7 mm H
-
Operating Temperature-20 to 70 deg C
-
Output TypeNPN/PNP
-
Enclosure TypeNEMA 1/2/3/3S/4/4X/6/12/IP67
-
Environmental Conditions90% at 50 deg C
-
Light SourceLED
- Compact, modulated, self-contained retroreflective sensors
- Switch-selectable for light operate or dark operate
- Includes Banners exclusive AID™ alignment system, US patent number 4356393
- Rugged, epoxy-encapsulated, totally encapsulated, O-ring sealing and stainless steel screws construction
- Physically and electrically interchangeable with 18 mm barrel-type photoelectric
- Exclusive, patented alignment indicating device system (AID, US patent no 4356393) lights a rear-panel mounted red LED indicator whenever the sensor sees a light condition, with a superimposed pulse rate proportional to the light signal strength (the stronger the signal, the faster the pulse rate)
- Industry standard mounting holes
- Both sourcing and sinking outputs (150 mA max. each), continuous overload and short-circuit protected
- Protected against false pulse on power-up and continuous overload or short-circuit of outputs
- Self-contained polarized retroreflective mode photoelectric sensor
- Less than 1 uA off-state output leakage, less than 25 mA
- Sensors will respond to either a light or dark signal of 1 ms or longer duration, 500 Hz maximum
- Reinforced thermoplastic polyester enclosure
-
Alternative Part Number26913
-
UNSPSC39121528
-
Standards/ApprovalsCE Certified|CSA Certified|cULus Listed
-
Full Engineering Drawing
Recently Viewed
Banner Engineering Maxi-Beam® SM312LVAGQD Self-Contained Photoelectric Sensor, Rectangle Shape, 2 m, Red Laser Sensing Beam, 1 ms Response, NPN/PNP Output
Banner Engineering Maxi-Beam® SM312LVAGQD Self-Contained Photoelectric Sensor, Rectangle Shape, 2 m, Red Laser Sensing Beam, 1 ms Response, Bi-Polar Output
1.125" X 1.781" X .406" OIL SEAL - CHI11180>
5/8" -ID G-STYLE BUSHING-IDCG5/8 >
3/4" DIAMETERX6" SOCKET HEAD CAP SCREWS-HOL72330 >
1-5/8"-ID S-FLEX COUPLING HALFS-LOV6S15/8>
Hougen® Rotabroach® 12240 12000 Annular Cutter, 1-1/4 in Dia Cutter, 2 in D Cutting, M2 HSS, Bright, Weldon with 2-Flat Shank
Hougen "12000 Series" cutters were the original annular cutters invented over 35 years ago. With the most features of any annular cutter, "12000 Series" cutters provide the best performance in the largest variety of materials. Compared to traditional tooling (twist drills, etc.) "12000 Series" cutters can multiply your cutting speed by up to 3 times. And you get longer tool life, a more accurate hole, a better finish, with no burrs. Hougen cutters maximize feed rates because up to 10 cutting edges distribute the cutting load evenly. "12000 Series" cutters convert a smaller area to chips, requiring less horsepower and thrust.
