Crosby® 1032652 HG-228-5/8 x 12 Turnbuckle, Jaw/Jaw, 5/8 in Thread, 3500 lb Working, 12 in Take Up, 22.16 in L Close, Steel
Crosby® 1032652 HG-228 Turnbuckle, Jaw/Jaw, 5/8 in Thread, 3500 lb Working, 12 in Take Up, 22.16 in L Close, Steel
-
BrandCrosby®
-
Manufacturer Part Number1032652
-
CountryUSA
-
FinishHot Dipped Galvanized
-
Thread Diameter5/8 in
-
MaterialSteel
-
Closed Length22.16 in
-
SeriesHG-228
-
Working Load3500 lb
-
End/EndJaw/Jaw
-
Take Up12 in
- End fittings are quenched and tempered or normalized, bodies heat treated by normalizing
- Forged jaw ends are fitted with bolts and nuts for 1/4 in through 5/8 in and pins and cotters on 3/4 in through 2-3/4 in sizes
- Modified UNJ thread on end fittings for improved fatigue properties
- Body has UNC threads
- Importantly, these turnbuckles meet other critical performance requirements including fatigue life, impact properties and material traceability, not addressed by ASME B30.26
-
UNSPSC31162405
-
Standards/ApprovalsFederal Spec FF-T-791b, Type 1, Form 1, Class 7|ASTM F-1145|ASME B30.26
-
Catalog
Recently Viewed
Crosby® 1032652 HG-228-5/8 x 12 Turnbuckle, Jaw/Jaw, 5/8 in Thread, 3500 lb Working, 12 in Take Up, 22.16 in L Close, Steel
Crosby® 1032652 HG-228 Turnbuckle, Jaw/Jaw, 5/8 in Thread, 3500 lb Working, 12 in Take Up, 22.16 in L Close, Steel
SATCO® S3810 General Service Incandescent Lamp, 40 W, E26 Incandescent Lamp, A15 Shape, 290 Lumens Initial
Incandescent lamps represent the original lighting technology, remaining virtually unchanged since their invention in the mid-19th century and the lighting technology Satco was founded upon. this is the technology most everyone has become familiar with and the baseline comparison for all other lighting technologies. As the incandescent bulb becomes more and more regulated, Satco remains on the cutting edge of new lighting technologies. Still, we remain well stocked with incandescent lamps in a multitude of wattages, base sizes and shapes for every application.
MORSE® 44582 Center Cutting Double End Regular Length End Mill, 3/16 in Dia Cutter, 1/2 in Length of Cut, 4 Flutes, 3/8 in Dia Shank, 3-1/4 in OAL, Bright
Dodge® 129285 208 Normal Duty Pillow Block Adapter Ball Bearing, 1-1/2 in Dia Bore, 3-1/2 in L Bolt Center-to-Center, 1.94 in Base to Bore Centerline, 4.63 in OAL x 3.94 in OAH
The Grip Tight® ball bearing is shaft-ready right out of the box and offered in a variety of housing styles for normal and medium duty operations. It accommodates commercial grade and some undersized shafting to lower costs, and all Grip Tight® assemblies fit into a standard Dodge® ball bearing housing.
Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction.
United Abrasives-SAIT 1AX Quick Ship™ 60510 Semi-Friable Coated Abrasive Belt, 2 in W x 48 in L, 80 Grit, Fine Grade, Aluminum Oxide Abrasive, Cotton Backing
