Dodge® 129285 208 Normal Duty Pillow Block Adapter Ball Bearing, 1-1/2 in Dia Bore, 3-1/2 in L Bolt Center-to-Center, 1.94 in Base to Bore Centerline, 4.63 in OAL x 3.94 in OAH
The Grip Tight® ball bearing is shaft-ready right out of the box and offered in a variety of housing styles for normal and medium duty operations. It accommodates commercial grade and some undersized shafting to lower costs, and all Grip Tight® assemblies fit into a standard Dodge® ball bearing housing.
-
BrandDodge®
-
UPC782475884070
-
Manufacturer Part Number129285
-
CountryUSA
-
Load Capacity7332 lb Dynamic/4475 lb Static
-
Locking DeviceGrip-Tight® Adapter Mounted
-
FinishUncoated
-
MaterialSteel
-
Maximum Speed8500 rpm
-
TypeNormal Duty
-
Mounting TypeTapped Base
-
Seal TypeSingle Lip
-
Series208
-
Base Width1.88 in
-
Base to Bore Centerline1.94 in
-
Bolt Center-to-Center Length3-1/2 in
-
Bore Diameter1-1/2 in
-
Bore TypeRound
-
Expansion TypeNon-Expansion (Fixed)
-
Overall Height3.94 in
-
Overall Length4.63 in
-
Overall Width1.84 in
- Non-metallic retainer provides added strength
- Grade 10 balls for quiet operation
- Case-carburized inner ring ensures greater wear resistance and longer life
- Lock/inner ring interface acts as bearing puller to ease disassembly
- Rugged housing for easy installation and alignment
| Competitor Name | Competitor Part Number |
|---|---|
| Applied Industrial Technologies | 101014606 |
| Motion Industries | 02482266 |
-
Alternative Part NumberTB-GT-108
-
UNSPSC31171504
-
Package DescriptionEACH
-
Standards/ApprovalsUL Listed
-
WarrantyLimited
-
Catalog
-
Specification Sheet
-
Warranty Information
-
Instruction/Installation Manual
Recently Viewed
Dodge® 129285 208 Normal Duty Pillow Block Adapter Ball Bearing, 1-1/2 in Dia Bore, 3-1/2 in L Bolt Center-to-Center, 1.94 in Base to Bore Centerline, 4.63 in OAL x 3.94 in OAH
The Grip Tight® ball bearing is shaft-ready right out of the box and offered in a variety of housing styles for normal and medium duty operations. It accommodates commercial grade and some undersized shafting to lower costs, and all Grip Tight® assemblies fit into a standard Dodge® ball bearing housing.
Sioux Chief TKO™ 887-PM 1-Piece Open Closet Flange With Stainless Steel Swivel Ring, PVC
At Sioux Chief we design our open flanges with the same care and precision as we do the TKO. Contractors have found the open flange to be a cost effective alternative in those instances where a test cap is not needed. These include installations after the system is tested or where no testing is performed. We complement our complete line of open flanges with five different connection types, in ABS or PVC, 1-piece or with a corrosion-resistant, 430 stainless steel swivel ring.
Koyo 39520 Type-TS Cup, 4-7/16 in OD, 15/16 in W Cup, 1-3/16 in W Bearing, 0.13 in Max House Fillet Radius
Koyo 39520 Type-TS Cup, 4-7/16 in OD, 15/16 in W Cup, 1-3/16 in W Bearing, 0.13 in Max House Fillet Radius
JET® JT9-376302 JLH Lever Chain Hoist, 1.5 ton Load, 15 ft H Lifting, 74.89 lb Rated, 1.26 in Hook Opening
JET® JLH Series Lever Hoists incorporate safety, durability and heavy duty construction for operation in severe industrial environments. Safety comes standard with features such as slip clutch style overload protection, which prevents the lever hoist from lifting or pulling damaging loads beyond its rated capacity. Our lightweight design, shorter handle and smaller body are ideal for confined areas and low headroom applications. Backed by a lifetime replacement warranty, JET® revolutionary single-piece brake design fuses the three components into the safest brake system in the market. The JET® JLH Series is available in 1/4 to 9 ton capacities, with standard lifts of 5 ft, 10 ft, 15 ft and 20 ft (custom lifts available). Whether it's inverted, vertical, horizontal or any other load angle, the JET® JLH Lever Hoist is the solution for your heavy duty industrial needs.
Pyramex® HP26130 SL Series Full Brim Hard Hat, 6-1/2 Fits Mini Hat, 8 Fits Max Hat, HDPE, 6-Point Nylon Suspension, ANSI Electrical Class Rating: Class C, E and G, ANSI Impact Rating: Type I, Ratchet Adjustment
Diablo® D1296N Circular Saw Blade, 12 in Dia x 0.071 in THK, 1 in Arbor, 96 Teeth
Diablo® blade features a thin kerf triple chip design that is specially designed to cut laminate flooring, double-sided laminates and melamine cleanly, leaving a smooth finish with no chipping or tear-out. Laminated materials are highly abrasive, so these blades feature a TiCo™ carbide blend ideally suited to harsh service. Diablo® blade is ideal for 12 in sliding miter saws and portable table saws.
