Beam Clamp Anchor Clips
The CROSBY 1082571 is an 8.5-ton shackle pin designed for Crosby G4075 series slng shackles
PREFORMED JR SMOOTH ID CLAMP, 5/8" WIDE, 0.0300" THICK, 316 STAINLESS STEEL
JUNIOR 2" X 5/8" WIDE X 0.030" THICK, 2" DIAMETER
The Crosby G-209 1-1/2" is a heavy-duty, hot-dip galvanized carbon steel screw pin anchor shackle featuring a 17-ton Working Load Limit (WLL) and Crosby's signature Red Pin®.
Working Load Limit: 12 tons
Safety Factor: 6:1
Inside Width: 3.26"
Inside Height: 4.69"
Mouth Width: 2.03"
Shackle Size: 1-1/4"
Pin Size: 1-3/8"
Material: Carbon Steel Shackle
Alloy Pin
Finish: Galvanized
Type: Screw Pin Anchor
Product Weight: 9.5 lbs.
Standards: Meets or exceeds all requirements of ASME B30.26, Federal Specification RR-C-271, & ASTM A148M.
Crosby G-209 Screw Pin Anchor Shackles are the industry standard for everyday rigging, lifting, and towing applications. Forged, quenched & tempered from high-strength steel and equipped with an alloy pin, these Grade 6 shackles are proof-tested, fatigue rated, and built to perform under demanding field conditions. All G-209 shackles feature the Red Pin
The Crosby G-209 1-3/4" is a heavy-duty, galvanized carbon steel screw pin anchor shackle featuring a Working Load Limit (WLL) of 25 tons (55,000 lbs). Manufactured by Kito Crosby in the USA, this rigging component is widely considered the industry standard for demanding lifting, tie-down, and towing applications
Crosby G-209 Screw Pin Anchor Shackles are the industry standard for everyday rigging, lifting, and towing applications. Forged, quenched & tempered from high-strength steel and equipped with an alloy pin, these Grade 6 shackles are proof-tested, fatigue rated, and built to perform under demanding field conditions. All G-209 shackles feature the Red Pin®
The Crosby G-209 1/2" is a hot-dip galvanized carbon steel screw pin anchor shackle featuring a 2-ton Working Load Limit (WLL) and a distinct Red Pin®. It is the industry standard for overhead lifting, towing, and everyday rigging applications.
The Crosby G-209 1/4" is a premium, high-strength screw pin anchor shackle designed for quick, temporary connections in tie-down, towing, suspension, or lifting applications. It features an industry-standard 0.5-ton (1,100 lbs) working load limit (WLL) and is instantly recognizable by Crosby's trademark Red Pin®
G-209-2-1/2 CROSBY MATERIAL HANDLING GROUP 2-1/2" 55-TON SHACKLES
The Crosby G-209 2-1/2" Screw Pin Anchor Shackle is a heavy-duty, forged steel rigging component with a 55-ton Working Load Limit
The Crosby G-209 3/16" is a high-quality screw pin anchor shackle manufactured by Kito Crosby. This industry-standard hardware piece is forged, quenched, and tempered from high-strength carbon steel, featuring a distinct alloy steel "Red Pin" for quick identity confirmation. It is specifically built for quick, temporary connections in dynamic overhead lifting, tie-down, towing, or suspension environments.
The Crosby G-209 3/4" is a premium, hot-dip galvanized screw pin anchor shackle manufactured by Kito Crosby. Widely considered an industry standard for rigging, towing, and overhead lifting, this specific model features the iconic Red Pin® as a hallmark of genuine manufacturing quality.
Crosby G-209 Screw Pin Anchor Shackles are the industry standard for everyday rigging, lifting, and towing applications. Forged, quenched & tempered from high-strength steel and equipped with an alloy pin, these Grade 6 shackles are proof-tested, fatigue rated, and built to perform under demanding field conditions. All G-209 shackles feature the Red Pin®
The Crosby G209 5/16" is a hot-dip galvanized carbon steel screw pin anchor shackle with a Working Load Limit (WLL) of 3/4 ton (0.75 metric tons / 1,650 lbs). It is a standard for everyday rigging, towing, and temporary lifting application
The Crosby G-209 5/8" is a heavy-duty, hot-dip galvanized screw pin anchor shackle featuring a 3.25-ton (6,500 lbs) Working Load Limit (WLL). Forged, quenched, and tempered by Kito Crosby, it is a industry-standard rigging component easily identified by its signature Red Pin®
Crosby G-209 Screw Pin Anchor Shackles are the industry standard for everyday rigging, lifting, and towing applications. Forged, quenched & tempered from high-strength steel and equipped with an alloy pin, these Grade 6 shackles are proof-tested, fatigue rated, and built to perform under demanding field conditions. All G-209 shackles feature the Red Pin
Crosby G-209 Screw Pin Anchor Shackles are the industry standard for everyday rigging, lifting, and towing applications. Forged, quenched & tempered from high-strength steel and equipped with an alloy pin, these Grade 6 shackles are proof-tested, fatigue rated, and built to perform under demanding field conditions. All G-209 shackles feature the Red Pin®
The Crosby G-210 Straight-Side Screw Pin Chain Shackle is a reliable, high-strength rigging solution for in-line connections where space is limited. Featuring a narrow, straight-sided body and Crosby’s signature Red Pin® alloy screw pin, each shackle is forged, quenched, and tempered for strength and durability. The G-210 is hot-dip galvanized and proudly made in the USA, with the Working Load Limit (WLL) and Grade 6 permanently marked on every shackle.
This shackle is fatigue rated to 20,000 cycles at 1.5x WLL and meets or exceeds the performance requirements of ASME B30.26 and Federal Spec RR-C-271H. It is approved for use in a wide temperature range from -40°F to 400°F
G-213-1/2 CROSBY MATERIAL HANDLING GROUP 1/2" 2-TON SHACKLES
Working Load Limit: 2 tons
Safety Factor: 6:1
Inside Width: 1.31"
Inside Height: 1.88"
Mouth Width: 0.81"
Shackle Size: 1/2"
Pin Size: 5/8"
Material: Carbon Steel Shackle
Alloy Pin
Finish: Galvanized
Type: Round Pin Anchor
Product Weight: .7 lbs.
Standards: Meets or exceeds all requirements of Federal Specification RR-C-271 & ASTM A148M.
The Crosby G-213 1-1/4" is a heavy-duty, hot-dip galvanized carbon steel round pin anchor shackle. Part of the industry-recognized lineup from Kito Crosby, it is forged, quenched, and tempered with an alloy steel pin to handle demanding tie-down, towing, or overhead lifting applications. Key Specifications Working Load Limit (WLL): 12 tons (26,400 lbs). Design/Safety Factor: 6:1. Shackle Size (Body Thickness): 1-1/4 inches. Pin Diameter: 1.38 inches. Pin Type: Round pin with a cotter pin. Throat Width (Opening between ears): 2.03 inches. Throat Depth (Inside length): 4.69 inches.
G-213-7/8 CROSBY MATERIAL HANDLING GROUP 7/8" 6-1/2-TON SHACKLES
The Crosby G-213 7/8" is a heavy-duty, hot-dip galvanized carbon steel round pin anchor shackle manufactured by Kito Crosby. This specific industrial rigging model features a 7/8-inch nominal body thickness and a 1-inch alloy steel pin secured by a removable cotter pin
Crosby G-2130 Bolt Type Anchor Shackles are forged, quenched & tempered Grade 6 shackles with an alloy bolt, nut, and cotter pin for secure, semi-permanent rigging connections. Each unit is proof-tested, fatigue rated, and built to exceed industry standards for strength, consistency, and traceability. The G-series shackles feature the iconic Red Pin®—
G-2130-1/2 CROSBY 1/2" 2-TON ANCHOR SHACKLES
1/2" 2-TON-LOAD-CAPACITY (4,000-POUND) BOLT-STYLE ANCHOR SHACKLE
Recently Viewed
9" x 11" 2000-GRIT SANDPAPER--BX/50-MMM02020>
Proto® J25TR42C Anti-Slip Tool Pouch, 18 Pocket, For Use With J1200R-MASD Combination ASD Wrench Set, Canvas, Red
THE ARC ABRASIVES MOUNTED FLAP WHEEL IS SPECIFICALLY ENGINEERED FOR APPLICATIONS SUCH AS: GRINDING, DEBURRING AND FINISHING. PERFECT FOR USE ON MILD STEEL AND ALUMINUM.
-ARC11390 >
RC-14-YC SPARK PLUG-CSP431 >
ROTARY HAMMER BITS-PWR760>
Milwaukee® 49-25-1501 OPEN-LOK™ 1-Piece Blade, For Use With Oscillating Multi-Tool, 1-3/8 in Cutting Width, 1-5/8 in Max Plunge Cut Depth, Carbide
The MILWAUKEE® OPEN-LOK™ 1-3/8" Carbide Teeth Metal Oscillating Multi-Tool Blades are designed for metal cutting in screws, bolts, nails, and more. Carbide Teeth blades last up to 50X longer than standard bi-metal blades and can be used in a wide range of materials while maintaining longer blade life. These blades feature a reinforced Universal Fit OPEN-LOK™ anchor for better strength & control and allow for quick blade changes across 100+ multi-tools. Not compatible with Starlock tools. MILWAUKEE® oscillating multi-tool blades are designed and made in the USA with global materials.
