BAND-IT J307 2" X 5/8" GALVANIZED CLAMPS
JUNIOR 2" X 5/8" WIDE X 0.030" THICK, 2" DIAMETER
Recently Viewed
JUNIOR 2" X 5/8" WIDE X 0.030" THICK, 2" DIAMETER
Campbell® can trace its beginnings back to 1834, when one of the many companies that eventually became what is today the Campbell® brand began manufacturing harnesses for horses. Over the years, countless products were added, including wire rope and chain fittings, drop forged chain hardware, high quality tackle blocks, shackles, hooks and much more.
Gates® Power Transmission PowerGrip® HTD® 425-5M-15 Synchronous Belt, 15 mm W, 425 mm OAL, 5 mm Pitch, 85 Teeth, Neoprene
PowerGrip™ HTD belts have a larger, more robust tooth profile for increased capacity, as compared to timing belts. 3M and 5M belts are suitable for domestic appliances, office machines, electric hand tools and for applications in the processing and chemical industry. 8M, 14M and 20M belts are used in high-performance drives in the machine tool, paper and textile industries where durability and low maintenance are required.
Gates® Power Transmission PowerGrip® GT®2 Twin Power® TP2310-14MGT-40 9232 Synchronous Belt, 165 Teeth, 14 mm Pitch, 2310 mm OAL, 40 mm W, Neoprene
PowerGrip™ GT™2 Twin Power™ Belts feature dual-sided teeth to provide equal load carrying capacity on either belt surface, enabling synchronization from both driving surfaces. These synchronous belts ensure high loading capacity on contra-rotating drives and ensure smooth running and high flexibility. Gates Twin Power PowerGrip GT2 belts are designed to perform at high speeds and characterized by low-running noise, with a larger tooth profile for increased performance capacity.
Crosby® 1019631 Anchor Shackle, 17 ton Load, 1-1/2 in, 1.66 in Dia Bolt Pin, Hot Dipped Galvanized
Crosby® 1019631 Anchor Shackle, 17 ton Load, 1-1/2 in, 1.66 in Dia Bolt Pin, Hot Dipped Galvanized
Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing, and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction. Depending on your preference, these bearings are available in both inch and metric shaft sizes with a wide variety of cast iron, stamped steel or rubber mount housings, sealing, and lubrication options or industry specific solutions.
