Proto Tools 1/2" X 9/16" 6-PT FLARE NUT WRENCH PRO J-3768
Proto® TorquePlus™ J3768 Flare Nut Wrench, Satin, Imperial, 1/2 x 9/16 in Double End Wrench, 6 Points, 7-1/2 in OAL, ASME B107.100
-
BrandProto®
-
UPC662679050740
-
Manufacturer Part NumberJ3768
-
CountryUSA|Canada
-
Finish/CoatingSatin
-
MaterialAlloy Steel
-
Measurement SystemImperial
-
Handle TypeSlip Resistant Grip
-
Wrench Opening1/2 x 9/16 in
-
Wrench TypeDouble End
-
Number of Points6
-
Specifications MetASME B107.100
-
Offset Angle15 deg
-
Open End Thickness3/8 x 7/16 in
-
Open End Width31/32 x 1-1/16 in
-
Overall Length7-1/2 in
- Flare nut box ends incorporate the TorquePlus system
- The TorquePlus design is a high performance drive configuration which allows for quick and easy wrench engagement to the fastener flats, not the corners
- The TorquePlus configuration employs a radius corner design, shifting contact area and stress away from the fastener corners and distributing contact stresses over a large area of the flare nut box end, minimizing slippage
- The TorquePlus internal design minimizes fastener rounding, helps to extend fastener life and allows the user to more easily turn worn, rounded or rusted fasteners
| Competitor Name | Cross-Reference Number |
|---|---|
| Grainger | 1ANX2 |
-
Alternative Part Number16726453
-
UNSPSC27111714
-
IDEA Index ID16726453
-
Package DescriptionEACH
-
Standards/ApprovalsASME B107.100
-
Catalog
Recently Viewed
Proto® TorquePlus™ J3768 Flare Nut Wrench, Satin, Imperial, 1/2 x 9/16 in Double End Wrench, 6 Points, 7-1/2 in OAL, ASME B107.100
REED's L4N1 and L4N1XP Thru-Bolt™ ratchet wrenches feature four sockets on one wrench in a popular dog bone configuration. The sockets are designed to stay on the handle, which means there are no loose sockets to misplace. The length and design of the handle provide maximum leverage. And, the rugged, textured handle grip ensures a secure hold for the operator. Use just one tool to work on mechanical joints and restraints, repair clamps, service saddles, gas/water couplings, flange bolts, friction clamps, hydrant break flanges and some bonnet bolts. Additionally, tightening nuts on long bolts or all-thread rod is never a problem with REED's Thru-Bolt™ sockets which work by letting the bolt pass completely through the socket and arm head so nuts can be worked on any threaded length. Thru-bolt sockets replace the need for separate regular and deep sockets. L4N1XP provides superior performance and extra protection as the sealed ratchets keep out most debris and dirt. Regular tool cleaning and maintenance is recommended for both wrench models. These socket wrenches are made in USA.
Browning® finished bore sprockets are offered in single strands. Offerings include 35 to 100 pitch range. Finished bore sprockets are available from 3/8 to 2-7/16 in. Hardened teeth are available up to 30 teeth.
Irwin® Hanson® 80238 Tap and Drill Bit Set, 2 Pieces, 3/8-16 Tap Thread, O Drill, UNC Thread, Spiral Flute Tap, Plug Tap Chamfer
Ideal for general purpose threading, the Hanson 3/8 in. – 16 NC Tap and Letter "O" Drill Bit Set is a convenient HCS tap and HSS drill combination. The high-speed steel drill bit ensures fast, accurate drilling, while the self-aligning tap works great with through holes and irregular surfaces. Set includes 3/8 in. – 16 NC Tap and Letter "O" drill bit.
As the name implies, screw extractors are a tool designed to remove a broken or seized screw. The screw must first be "drilled out" to the proper size in order for the screw extractor to fit properly.
1/2" -MALE PIPE THREADX2" STAINLESS STEEL NIPPLE-FIT1/2X2SSN >
