Drillco 9000EDS Screw Extractor Set, #1 to #5, 10 Pieces, Carbon
As the name implies, screw extractors are a tool designed to remove a broken or seized screw. The screw must first be "drilled out" to the proper size in order for the screw extractor to fit properly.
-
BrandDrillco
-
UPC045997395395
-
Manufacturer Part Number9000EDS
-
CountryUSA|Canada
-
FinishBright
-
MaterialCarbon
-
Measurement SystemImperial
-
Series9000E
-
Number of Pieces10
-
Size Range#1 to #5
- As the name implies, screw extractors are a tool designed to remove a broken or seized screw
- The screw must first be "drilled out" to the proper size in order for the screw extractor to fit properly
- The screw extractor is turned counter clockwise using a tap wrench
- Made from high carbon steel for added strength
- Designed to be rotated counterclockwise in a tap wrench
- Square shank for use with standard sized tap wrenches
-
UNSPSC27111709
-
Package Description1/PK
-
Catalog
Recently Viewed
As the name implies, screw extractors are a tool designed to remove a broken or seized screw. The screw must first be "drilled out" to the proper size in order for the screw extractor to fit properly.
DixonĀ® PP-DC-50 Type DC Cam & Groove Dust Cap, 1/2 in Nominal, Polypropylene
DixonĀ® PP-DC-50 Type DC Cam & Groove Dust Cap, 1/2 in Nominal, Polypropylene
Linergy NEMA sectional terminal blocks are for terminating wire and are designed to NEMA standards. This Square D terminal block mounting track is designed specifically for 9080G terminal blocks. The track is pre-punched with oblong slots to make mounting the track to the panel easier. This terminal block track is 20 inches long. This track is made of galvanized steel.
DixonĀ® SDBC-3 Tiger Clampsā¢ Double Spiral Bolt Clamp, 3 in ID, Carbon Steel Band, Domestic
1/8" PEG HOOK ASSORTMENT-NTL180760 >
MetacaulkĀ® 66640 Intumescent Firestop Sealant, 10.3 oz Cartridge, Paste Form, Red, 1.25
MetacaulkĀ® 1000 is a one component, general purpose fire rated sealant and smoke seal for construction joints and through-penetrations. MetacaulkĀ® 1000 is a water based, extremely intumescent, non-sag caulking grade sealant that is easy to apply as well as to retrofit. It cures to an elastomeric seal that is suitable where dynamic movement is expected. In the event of a fire, MetacaulkĀ® 1000 will prevent the spread of flames, smoke, hot gases and water through joint openings and through penetrations. No dilution or mixing is required for use. No special skills are necessary for installation. MetacaulkĀ® 1000 is applied with a conventional caulking gun, bulk loading gun or can be troweled from the pail. For large applications, it can be pumped directly from the pail. MetacaulkĀ® 1000 systems are rated for 1, 2, 3 and 4 hours in accordance with the ASTM E814 (UL1479),UL 2079 and ULC-S115-95 test standards. MetacaulkĀ® 1000 is protected in a wet stage as well as in a dry stage against mold growth with a combination of biocides.
