Armstrong® 11-854 Crowfoot Wrench, 5/8 in Open End Wrench, 3/8 in Drive, 1.6 in OAL, ASME B107.21, Polished Chrome
Armstrong® 11-854 Crowfoot Wrench, 5/8 in Open End Wrench, 3/8 in Drive, 1.6 in OAL, ASME B107.21, Polished Chrome
-
BrandArmstrong®
-
UPC781412118544
-
Manufacturer Part Number11-854
-
CountryUSA
-
Finish/CoatingPolished Chrome
-
MaterialHigh Alloy Steel
-
Measurement SystemImperial
-
Handle Size0.63 in W x 0.44 in THK
-
Head Thickness0.35 in
-
Head Width1.2 in
-
Wrench Opening5/8 in
-
Wrench TypeOpen End
-
Specifications MetASME B107.21
-
Drive Size3/8 in
-
Overall Length1.6 in
- Crowfoot wrenches provide access to hard-to-reach fasteners and fittings by attaching them to a drive tool
- Open end crow foot wrenches have a thinner head and are used to grip hard-to reach fasteners and fittings
- Full polish chrome finish provides smooth edges with a high luster
- Manufactured from high alloy steel using the most up-to-date manufacturing process and heat treat for greater strength and durability
| Competitor Name | Cross-Reference Number |
|---|---|
| MSC | 00607564 |
-
UNSPSC27111756
-
Standards/ApprovalsUS Federal Specification GGG-W-1507b
Recently Viewed
Armstrong® 11-854 Crowfoot Wrench, 5/8 in Open End Wrench, 3/8 in Drive, 1.6 in OAL, ASME B107.21, Polished Chrome
Armstrong® 11-854 Crowfoot Wrench, 5/8 in Open End Wrench, 3/8 in Drive, 1.6 in OAL, ASME B107.21, Polished Chrome
ISOSTATIC™ Oilube® 401144 Round Bore Sleeve Bearing, 1/2 in Dia Bore, 3/4 in OD, 1 in W
SNW-17 X 2-15/16 WESCO 2-15/16" SPHERICAL BEARING ADAPTER
SNW 17X2.15/16
Adapter sleeve with AN or N lock nut and W lock washer, inch dimensions
Adapter sleeves are the most commonly used components for locating bearings with a tapered bore onto a cylindrical seat as they can be used on plain shafts or stepped shafts. The sleeves are slit and are supplied complete with an lock nut and locking device. They are easy to install and require no additional location on the shaft.
Easy to install
Complete with lock nut
Complete with locking device
Browning® 1224419 Minimum Plain Bore Type C1 Change Gear, 10 Diametral Pitch, 14.5 deg Pressure Angle, 1 in W Face, 33 Teeth, 3.3 in Dia Pitch, 1-1/4 in Dia Bore, Steel
Browning® offers a comprehensive line of off the shelf gears, including spur, miter and bevel as well as change gears. These are available in 20 deg pressure angle from 20 to 4 diametral pitch and 14.5 deg pressure angle from 48 to 3 diametral pitch. They are all designed to increase output, reduce costs and avoid the need for custom specials.
Enerpac® SCL302H Low Height Hydraulic Cylinder and Hand Pump Set, 30 ton, 2.44 in, 10000 psi
Enerpac® SCL302H Low Height Hydraulic Cylinder and Hand Pump Set, 30 ton, 2.44 in, 10000 psi
10-MM-PITCHX810-MM TIMING BELT-JAS25T10810 >
