SNW-17 X 2-15/16 WESCO 2-15/16" SPHERICAL BEARING ADAPTER
SNW 17X2.15/16
Adapter sleeve with AN or N lock nut and W lock washer, inch dimensions
Adapter sleeves are the most commonly used components for locating bearings with a tapered bore onto a cylindrical seat as they can be used on plain shafts or stepped shafts. The sleeves are slit and are supplied complete with an lock nut and locking device. They are easy to install and require no additional location on the shaft.
Easy to install
Complete with lock nut
Complete with locking device
Recently Viewed
SNW-17 X 2-15/16 WESCO 2-15/16" SPHERICAL BEARING ADAPTER
SNW 17X2.15/16
Adapter sleeve with AN or N lock nut and W lock washer, inch dimensions
Adapter sleeves are the most commonly used components for locating bearings with a tapered bore onto a cylindrical seat as they can be used on plain shafts or stepped shafts. The sleeves are slit and are supplied complete with an lock nut and locking device. They are easy to install and require no additional location on the shaft.
Easy to install
Complete with lock nut
Complete with locking device
Browning® 1224419 Minimum Plain Bore Type C1 Change Gear, 10 Diametral Pitch, 14.5 deg Pressure Angle, 1 in W Face, 33 Teeth, 3.3 in Dia Pitch, 1-1/4 in Dia Bore, Steel
Browning® offers a comprehensive line of off the shelf gears, including spur, miter and bevel as well as change gears. These are available in 20 deg pressure angle from 20 to 4 diametral pitch and 14.5 deg pressure angle from 48 to 3 diametral pitch. They are all designed to increase output, reduce costs and avoid the need for custom specials.
Enerpac® SCL302H Low Height Hydraulic Cylinder and Hand Pump Set, 30 ton, 2.44 in, 10000 psi
Enerpac® SCL302H Low Height Hydraulic Cylinder and Hand Pump Set, 30 ton, 2.44 in, 10000 psi
10-MM-PITCHX810-MM TIMING BELT-JAS25T10810 >
TIMING BELTS-JAS173L075>
1-5/8"-ID NEEDLE BEARING - IKOBAM268>
