Proto Tools 1-7/16" 1/2"-DR FLARE/CROW WRENCH PRO J-5346-FL
Proto® J5346FL Flare Nut Crowfoot Wrench, 1-7/16 in Wrench, 1/2 in Drive, 12 Points, 3-3/8 in OAL, ASME B107.21, Full Polished
-
BrandProto®
-
UPC662679182700
-
Manufacturer Part NumberJ5346FL
-
CountryUSA|Canada
-
Finish/CoatingFull Polished
-
MaterialAlloy Steel
-
Measurement SystemImperial
-
TypeFlare Nut
-
Wrench Opening1-7/16 in
-
Number of Points12
-
Specifications MetASME B107.21
-
Drive Size1/2 in
-
Overall Length3-3/8 in
- Designed for speed and safety
- Special heat treated alloy steel helps increase strength and durability
- 12 point box end allows for fine indexing, helping to improve speed and access
- Fits 4, 6 and 12 point fasteners
- Full polish finish provides corrosion resistance and easy-to-clean surfaces
| Competitor Name | Cross-Reference Number |
|---|---|
| Grainger | 426H06 |
-
UNSPSC27111714
-
Package DescriptionEACH
-
Standards/ApprovalsASME B107.21
-
Catalog
Recently Viewed
Proto® J5346FL Flare Nut Crowfoot Wrench, 1-7/16 in Wrench, 1/2 in Drive, 12 Points, 3-3/8 in OAL, ASME B107.21, Full Polished
Browning 20-TOOTH #50 CHAIN DOUBLE SPROCKET BRW D-50-TB-20
Browning® offers a variety of bushing type sprockets available in single and double strands. Offerings include 35 to 160 pitch range. Bushed type bore ranges are available from 1/2 to 5 in. Hardened teeth are available up to 30 teeth.
Made from low carbon steel and tapered 1/4 in/ft. Pins are mainly used for hole alignment in maintenance machinery. Handy kit for shop toolroom or toolbox. On hand when needed saves time and money. Plastic compartment box is easy to store. The Precision Brand® 100-piece taper pin Assortment contains: (3) #0 x 3/4 in, (3) #0 x 1 in, (5) #0 x 1-1/4 in, (5) #0 x 1-1/2 in, (3) #0 x 1-3/4 in, (3) #1 x 3/4 in, (5) #1 x 1 in, (5) #1 x 1-1/4 in, (5) #1 x 1-1/2 in, (3) #1 x 1-3/4 in, (3) #1 x 2 in, (3) #2 x 3/4 in, (3) #2 x 1 in, (5) #2 x 1-1/4 in, (5) #2 x 1-1/2 in, (3) #2 x 1-3/4 in, (5) #2 x 2 in, (3) #2 x 2-1/4 in, (5) #3 x 1 in, (5) #3 x 1-1/4 in, (5) #3 x 1-1/2 in, (5) #3 x 1-3/4 in, (5) #3 x 2 in, (3) #3 x 2-1/4 in, (3) #3 x 2-1/2 in, (3) #3 x 2-3/4 in, (3) #3 x 3 in, (3) #4 x 1 in, (3) #4 x 1-1/4 in, (3) #4 x 1-1/2 in, (5) #4 x 1-3/4 in, (3) #4 x 2 in, (3) #4 x 2-1/4 in, (3) #4 x 2-3/4 in, (3) #4 x 3 in, (3) #5 x 1-1/2 in, (5) #5 x 1-3/4 in, (3) #5 x 2 in, (3) #5 x 2-1/4 in, (3) #5 x 2-1/2 in, (3) #5 x 2-3/4 in, (3) #5 x 3 in, (3) #6 x 1-1/2 in, (3) #6 x 1-3/4 in, (3) #6 x 2 in, (3) #6 x 2-1/4 in, (3) #6 x 2-3/4 in and (3) #6 x 3 in.
Crescent® 20218 Combination Wrench, 1 in, 12 Points, 15 deg Offset, 13.56 in OAL, Drop Forged Alloy Steel, Polished Chrome/Nickel Plated
Crescent® 20218 Combination Wrench, 1 in, 12 Points, 15 deg Offset, 13.56 in OAL, Drop Forged Alloy Steel, Polished Chrome/Nickel Plated
The Crescent Nicholson half-round double-cut bastard files are ideal for materials containing iron, mild steel, plastics, and wood. The coarse grade is perfect for use on concave, convex, and flat surfaces. The two-sided files are rounded on 1 side and flat on the other, so you can round out holes with ease. Half-round bastard files are double-cut on the rounded sides, allowing you to quickly remove material from the work piece.
Irwin® 3043010 Ship Auger Bit, 13/16 in Dia, 17 in OAL, 12 in L Hollow Center Flute, 7/16 in Shank
Weldtec ship auger bit with single cutter and side lip is designed to bore holes in wood where nails may be encountered. Cuts through nails without damaging the bit. The hollow center flute clears chips quickly out of the hole. Ideal for applications where chip clogging can be a problem such as with green wood and creosoted poles. Full-length heat treated bit guards against bending in heavy-duty applications and strengthens the twist where the greatest strain occurs. The 7-1/2-in length allows bit to be used in tight areas and the wide lands keep the bit straight as it bores through the hole. The medium-fast screw point is ideal for general wood boring applications.
