Ingersoll-Rand 116 General Duty Round Shank Standard Air Hammer, 0.69 in Dia Bore, 3500 bpm, 2.63 in L Stroke, 90 psi
Ingersoll-Rand 116 General Duty Round Shank Standard Air Hammer, 0.69 in Dia Bore, 3500 bpm, 2.63 in L Stroke, 90 psi
-
BrandIngersoll Rand
-
UPC663023000497
-
Manufacturer Part Number116
-
CountryUSA
-
Minimum Hose Size3/8 in
-
Handle TypePistol Grip
-
Air Flow Rate3 cfm Average, 15 cfm at Load
-
Air Inlet1/4 in NPTF
-
Air Pressure90 psi
-
Dimensions7.8 in L
-
Blows per Minute3500 bpm
-
Bore Diameter0.69 in
-
Tool/KitBare Tool
-
TypeGeneral Duty Round Shank Standard
-
Sound Level104 dBA Pressure Level/117.4 dBA Power Level
-
Stroke Length2.63 in
- Reliable, This hammers alloyed steel barrel and heat-treated piston prolong your tools life and make sure it delivers the same quality output every time
- Lightweight, Built for user comfort, this tool is lightweight and easy to use, so you never have to overexert yourself when working a job
- Power, With a built-in power regulator you have full control over the speed and power output of your hammer, up to 3,500 blows per minute
| Competitor Name | Competitor Part Number |
|---|---|
| Grainger | 6Z559 |
| Fastenal | 1591-116 |
-
UNSPSC27111602
-
SDS
-
Catalog
-
Instruction/Installation Manual
-
Owners/User Manual
-
Full Engineering Drawing
Recently Viewed
Ingersoll-Rand 116 General Duty Round Shank Standard Air Hammer, 0.69 in Dia Bore, 3500 bpm, 2.63 in L Stroke, 90 psi
Ingersoll-Rand 116 General Duty Round Shank Standard Air Hammer, 0.69 in Dia Bore, 3500 bpm, 2.63 in L Stroke, 90 psi
DeWALT® 7441SD1-PWR SD1 Expansion Wedge Anchor, 3/4 in Dia, 4-3/4 in OAL, 2-1/4 in L Thread, Carbon Steel, Zinc Plated
The Power-Stud®+ SD1 Anchor is a fully threaded, torque controlled, wedge expansion Anchor which is designed for consistent performance in cracked and uncracked concrete. Suitable base materials include normal weight concrete, sand lightweight concrete, concrete over steel deck and grouted concrete masonry. The Anchor is manufactured with a zinc plated carbon steel body and expansion clip for premium performance. Nut and washer are included.
DeWALT® 7424SD1-PWR SD1 Expansion Wedge Anchor, 1/2 in Dia, 5-1/2 in OAL, 3-3/4 in L Thread, Carbon Steel, Zinc Plated
The Power-Stud®+ SD1 Anchor is a fully threaded, torque controlled, wedge expansion Anchor which is designed for consistent performance in cracked and uncracked concrete. Suitable base materials include normal weight concrete, sand lightweight concrete, concrete over steel deck and grouted concrete masonry. The Anchor is manufactured with a zinc plated carbon steel body and expansion clip for premium performance. Nut and washer are included.
12-VOLT CORDLESS HAMMERDRILL WITH 2" BAT-MTB02297 >
MEN'S XXL JACKET WITH HEATED KIT-MWK2171XXL>
Martin Hi-Cap® 4 5V 670 SK Solid Type A-1 Wedge Stock Sheave, 1/2 to 2-5/8 in QD® Bushed Bore, 6.7 in OD, 4 Grooves, 6.6 in Dia Pitch, 3.063 in W Face
Hi-Cap® sheaves (narrow V-belts) are manufactured from class 30 gray iron (30,000 tensile strength) and can have a maximum speed of 6500 fpm. All Martin sheaves are statically balanced. Dynamic balancing should be considered for any sheaves exceeding 5000 fpm, or if they will be used on equipment where vibration is a problem. Martin has extensive inventories of both QD and TB style V-belt sheaves to run with 3V, 5V, and 8V belts.
