Armstrong® 25-132 Open End Regular Length Combination Wrench, 1 in, 12 Points, 15 deg Offset, 13.56 in OAL, High Alloy Steel, Polished Chrome, ASME B107.6-1994
Armstrong® 25-132 Open End Regular Length Combination Wrench, 1 in, 12 Points, 15 deg Offset, 13.56 in OAL, High Alloy Steel, Polished Chrome, ASME B107.6-1994
-
BrandArmstrong®
-
UPC781412251326
-
Manufacturer Part Number25-132
-
CountryUSA
-
Finish/CoatingPolished Chrome
-
MaterialHigh Alloy Steel
-
Measurement SystemImperial
-
TypeOpen End Regular Length
-
Handle TypeFlat
-
Head Angle15 deg
-
Wrench Opening1 in
-
Number of Points12
-
Specifications MetASME B107.6-1994
-
Offset Angle15 deg
-
Open End Thickness0.41 in
-
Open End Width2.05 in
-
Overall Length13.56 in
-
Box End Thickness0.62 in
-
Box End Width1.45 in
- Box ends incorporate a radius corner design that engages the flats of the fastener, not the corners, providing up to 15 to 20% more torque while reducing fastener rounding, enhancing the turning of worn fasteners
- Box ends are offset a true 15 deg for clearing obstructions and knuckle clearance on flat surfaces
- Open end has a radius design for greater strength; especially when compared to a hex open end
- Large size stamp on both sides of the wrench for ease in identification
- Full polish chrome finish provides smooth edges with a high luster
- Manufactured from high alloy steel using the most up-to-date manufacturing process and heat treat for greater strength and durability
| Competitor Name | Competitor Part Number |
|---|---|
| MSC | 00141820 |
-
UNSPSC27111713
-
Standards/ApprovalsUS Federal Specification GGG-W-636E
-
Catalog
Recently Viewed
Armstrong® 25-132 Open End Regular Length Combination Wrench, 1 in, 12 Points, 15 deg Offset, 13.56 in OAL, High Alloy Steel, Polished Chrome, ASME B107.6-1994
Armstrong® 25-132 Open End Regular Length Combination Wrench, 1 in, 12 Points, 15 deg Offset, 13.56 in OAL, High Alloy Steel, Polished Chrome, ASME B107.6-1994
SATIN BLACK STRAIGHTIKE PLATES-NTL162057 >
Proto® TorquePlus™ J10032M Standard Length Socket, Metric, 1 in Square Drive, 32 mm
THE BASIC E-CLIP PROVIDES RELATIVELY LARGE SHOULDER HEIGHT FOR A SMALL SHAFT DIAMETER. ONLY GROOVE SIZE IS CRITICAL WITH THIS TYPE OF CIRCLIP, THE SHAFT DIAMETER CAN BE VARIED WIDELY
