494 BONDO
1-GAL BONDO WITH HARDENER-BNO494 >
Recently Viewed
1-GAL BONDO WITH HARDENER-BNO494 >
GEARWRENCH® 69-551G 1-Piece Dead Blow Hammer, 30 in OAL, 2-3/4 in Dia Sledge Face, 3.65 lb Hot Cast Urethane Head, Polyurethane Handle
We offer a broad line of polyurethane dead blow hammers in ball pein, standard one-piece, slim line one-piece, and sledge head one-piece types, all built with the strength and innovation that define GEARWRENCH. Each hammers' head contains a canister full of steel shot that creates a dead blow effect, sustaining impact, maximizing force, reducing rebound, and absorbing the shock of impact. The handles are reinforced with steel for strength and also feature a knurled texture for improved grip. The flanged back-end of the handle won't slip past your grip. The ball pein type has a steel face and pein which allows for conventional use in striking punches and chisels, as well as shaping and straightening unhardened metals. The standard, slim line, and sledge head one-piece types have a durable, hot-cast polyurethane coating which resists chipping or splitting, and is non-marring and non-sparking. The hot-cast polyurethane coating also reduces noise when striking metal.
Proto® J1368 Mallet, 16-3/4 in OAL, 2-1/4 in Dia Flat Face, 2.3 lb Rubber Head, Hickory Wood Handle
Armstrong® 25-132 Open End Regular Length Combination Wrench, 1 in, 12 Points, 15 deg Offset, 13.56 in OAL, High Alloy Steel, Polished Chrome, ASME B107.6-1994
Armstrong® 25-132 Open End Regular Length Combination Wrench, 1 in, 12 Points, 15 deg Offset, 13.56 in OAL, High Alloy Steel, Polished Chrome, ASME B107.6-1994
GEARWRENCH® 85212 Double Box End Wrench, 16 x 17 mm, 18 x 19 mm Wrench, 12 Points, 0 deg Offset, 230 mm OAL, High Alloy Steel, Polished Chrome
The GEARWRENCH QuadBox™ double box ratcheting wrenches give you 4 sizes on 1 wrench, reducing your tool count and making more space in your tool box. Each box end has two usable sizes, one on either side, and levers on either end to swap the wrench's ratcheting direction without removing the wrench. The ratcheting box end is designed to need as little as 5° of swing arc to move fasteners, versus 30° for standard wrenches. These wrenches are also made from a strong alloy steel with a bright, full polish chrome finish. Each ratcheting box end features an off-corner loading design for a better grip on the fastener and reduced fastener rounding. The 0° offset on both ends of the wrench provides greater access to fasteners in the tightest spaces.
32-OZ. HOT CAST DEAD BLOW BALL PEIN HAMMER-ARS69532 >
